Structure and Properties of Cocoons and Silk Fibers Produced by Attacus atlas

Silk fibers in the three layers of Attacus atlas (A. atlas) cocoons have morphological structure and tensile properties similar to that of Bombyx mori silk. Attempts are being made to produce silk for commercial applications from cocoons of relatively unknown wild insects due to the unique properties of the fibers and as a source of income and employment. In this research, A. atlas cocoons were used to study the chemical composition, morphology, physical structure and tensile properties of the silk fibers in the cocoons and ability of the fibers to support the attachment and proliferation of mouse fibroblast cells. It was found that A. atlas cocoons consists of outer, intermediate and inner layer with average breaking tenacity of 4.1, 4.3 and 3.6 g/den, respectively similar to that of B. mori silk (4.3–5.2 g/den). The heavier cocoons, less restrictive rearing conditions and good properties of the fibers compared to B. mori silk makes A. atlas a potential alternative to common silks for commercial scale silk production. A. atlas fibers had about 80 % higher optical densities of cells and extensive growth of F-actin compared to B. mori silk fibers.     

Insecticide pollution of Indian rivers

Summary Rivers are the main source of water in India, and are particularly used for agricultural irrigation and drinking water supply. As most of the rivers pass through agricultural fields, they are subject to contamination with the different insecticides used for crop protection. Residues of persistent organochlorines, which are still used in large quantities in India, are found in water from many Indian rivers. In certain rivers, the concentrations of DDT, aldrin and heptachlor are often present in excess of their guideline limits. Although the concentration level of gamma-HCH is well below the guideline limit, the accumulation of the carcinogenic beta isomer is a matter of great concern. A few organophosphorus insecticides have also been detected in river water. Recently, some organochlorine insecticides have been banned from use in India. The use of new, readily biodegradable insecticides and biocides in agriculture and public health programmes offers some optimism.Drs Satya P. Mohapatia, Vijay T. Gajbhiye and Narendra R. Agnihotri all work within the Division of Agricultural Chemicals at the above address. Dr Manju Raina is employed by the Ganga Project Directorate of the Ministry of Environment and Forests, New Delhi 11003, India.     

Synthesis of nanoparticles using microorganisms and their applications: a review

Environmental Chemistry Letters - Nanoparticles synthesis under green conditions has been performed using natural resources to diminish the use of toxic chemicals. For instance, microbial synthesis...     

Chronic exposure to pyrethroid-based allethrin and prallethrin mosquito repellents alters plasma biochemical profile

Continuous exposure of humans to pyrethroid-based mosquito repellents for longer durations may lead to adverse health effects. No information is available on long-term use of these mosquito repellents pertaining to the biochemical changes in human subjects. Therefore, the present study is an attempt to evaluate the status of health in human volunteers exposed to two commercially available mosquito repellent pyrethroids, allethrin and prallethrin, in terms of changes in plasma biochemical profile. Results of this study showed less but significant increase in the levels of plasma glucose, phospholipids, nitrite and nitrate, lipidperoxides with a decrease in plasma cholesterol. No significant changes were observed in the contents of total protein, albumin, globulin, HDL-C and LDL-C. However, SGPT activity increased significantly in persons exposed to only allethrin. Though the present investigation involving a limited number of human subjects indicates the onset of both protective changes as well as derangement in metabolism, a detailed and rigorous study is greatly warranted to arrive at a definite conclusion about the effects of pyrethroid mosquito repellents.     

Current understanding of the influence of environmental factors on SARS-CoV-2 transmission,persistence, and infectivity

Environmental Science and Pollution Research - Coronavirus disease 2019 (COVID-19) has emerged as a significant public health emergency in recent times. It is a respiratory illness caused by the...     

Three-dimensional laser machining of structural ceramics

Three- dimensional laser machining of structural ceramics such as alumina (Al₂O₃), silicon nitride (Si₃N₄), silicon carbide (SiC) and magnesia (MgO) was carried out using a 1.06 μm wavelength pulsed Nd:YAG laser. The rate of machining predicted in terms of material removed per unit time (mg/s) increased with an increase in heating rate (K/s). A thermal model based on temperature dependent absorptivity and thermophysical properties, in addition to conduction, convection and radiation based heat transfer, was developed to predict material removal rate. Predicted values were compared with actual measurements made from machined cavities. Such a study would enable advance predictions of the laser processing conditions required to machine cavities of desired dimensions.     

Accumulation and translocation of heavy metals in soil and plants from fly ash contaminated area

The present investigation deals with the accumulation of heavy metals in fields contaminated with fly ash from a thermal power plant and subsequent uptake in different parts of naturally grown plants. Results revealed that in the contaminated site, the mean level of all the metals (Cd, Zn, Cr, Pb, Cu, Ni, Mn and Fe) in soil and different parts (root and shoots) of plant species were found to be significantly (p<0.01) higher than the uncontaminated site. The enrichment factor (EF) of these metals in contaminated soil was found to be in the sequence of Cd (2.33) > Fe (1.88) > Ni (1.58) > Pb (1.42) > Zn (1.31) > Mn (1.27) > Cr (1.11) > Cu (1.10). Whereas, enrichment factor of metals in root and shoot parts, were found to be in the order of Cd (7.56) > Fe (4.75) > Zn (2.79) > Ni (2.22) > Cu (1.69) > Mn (1.53) > Pb (1.31) > Cr (1.02) and Cd (6.06) approximately equal Fe (6.06) > Zn (2.65) > Ni (2.57) > Mn (2.19) > Cu (1.58) > Pb (1.37) > Cr (1.01) respectively. In contaminated site, translocation factor (TF) of metals from root to shoot was found to be in the order of Mn (1.38) > Fe (1.27) > Pb (1.03) > Ni (0.94) > Zn (0.85) > Cd (0.82) > Cr (0.73) and that of the metals Cd with Cr, Cu, Mn, Fe; Cr with Pb, Mn, Fe and Pb with Fe were found to be significantly correlated. The present findings provide us a clue for the selection of plant species, which show natural resistance against toxic metals and are efficient metal accumulators.