Multi-component assessment of worker exposures in a copper refinery. Part 2. Biological exposure indices for copper, nickel and cobalt

Urinary copper (Cu), nickel (Ni) and cobalt (Co) concentrations were determined for 127 Cu refinery workers (40 females, 87 males), with values of the 95% upper confidence interval of the geometric mean in nmol per mmol creatinine of 89 (Ni), 42 (Cu) and 3.4 (Co) for electrorefinery workers. In the pyrometallurgical departments, the corresponding concentrations were 37 (Ni), 99 (Cu) and 11 (Co). Female workers had higher Co urinary concentrations than males (p< or = 0.05) while no gender difference was observed for Cu and Ni. Inter-elemental correlations were moderate to weak. Based on the inhalable aerosol levels reported previously for the same workers, the observed urinary Cu concentrations were considerably lower than expected, relative to Co and Ni. This is interpreted in terms of the current understanding of Cu homeostasis.     

Assessment of the efficacy of slow-release formulations of the tribenuron-methyl herbicide in field-grown spring wheat

Environmental Science and Pollution Research - The efficacy of slow-release formulations of tribenuron-methyl (TBM) embedded in the matrix of degradable poly(3-hydroxybutyrate) blended with birch...     

Documenting lemming population change in the Arctic: Can we detect trends?

Lemmings are a key component of tundra food webs and changes in their dynamics can affect the whole ecosystem. We present a comprehensive overview of lemming monitoring and research activities, and assess recent trends in lemming abundance across the circumpolar Arctic. Since 2000, lemmings have been monitored at 49 sites of which 38 are still active. The sites were not evenly distributed with notably Russia and high Arctic Canada underrepresented. Abundance was monitored at all sites, but methods and levels of precision varied greatly. Other important attributes such as health, genetic diversity and potential drivers of population change, were often not monitored. There was no evidence that lemming populations were decreasing in general, although a negative trend was detected for low arctic populations sympatric with voles. To keep the pace of arctic change, we recommend maintaining long-term programmes while harmonizing methods, improving spatial coverage and integrating an ecosystem perspective.     

Biacore biosensor immunoassay for 4-nonylphenols: assay optimization and applicability for shellfish analysis

A rapid Biacore biosensor immunoassay of 4-nonylphenols was developed. Two types of antibodies were used in the study: polyclonal antibodies with high cross-reactivity towards technical 4-nonylphenol and a monoclonal antibody very specific to 4-n-nonylphenol. 9-(p-Hydroxyphenyl)nonanoic acid was immobilized onto surface of a sensor chip. The best assay sensitivity was achieved using a flow rate of 50 microl min(-1) and injection time of 2 min. For the assay incorporating monoclonal antibodies a limit of detection 2 ng ml(-1) for 4-n-nonylphenol was achieved. With polyclonal antibodies one order lower sensitivity was observed for 4-nonylphenols. High background level of calibration curve for technical 4-nonylphenol was decreased by using IgG fraction of polyclonal antibodies in combination with lower amount of immobilised 9-(p-hydroxyphenyl)nonanoic acid. Sensitivity of the assay was improved by using a chip with a new derivative on a surface-N-aminobutyl [2-(4-hydroxyphenyl)ethylamine] (limit of detection--5 ng ml(-1)). Applicability of the developed assays to ecological monitoring was checked in experiments using shellfish samples. 4-n-Nonylphenol from spiked samples was extracted into hexane followed by clean-up on NH2 SPE columns. Calibration curves generated for cockles, mussels and oyster samples were identical (limit of detection about 10 ng g(-1)) whereas for scallop samples a slight decrease (about 5-10%) of absolute response was observed. In the assay using the monoclonal antibody specific to 4-n-nonylphenol 31 shellfish samples were found to be negative. Results obtained with polyclonal antibodies indicated that two scallop samples contained a quantity of 4-nonylphenols. The developed biosensor assay could be applied for shellfish analysis as a preliminary screening method.     

Geophysical investigations for evaluation of environmental pollution in a mine tailings area

Sulfide-containing mill wastes of the Komsomolsk ore processing plant situated in the Kemerovo region (Russia) were examined in 2013–2015. Multipurpose studies of the mine tailings determined the composition of waste, pore water, mine drainages, and affected groundwater. Electrical resistivity tomography was used to trace the geoelectric zoning of the waste samples. Layers with low resistivity indicated areas with pore spaces filled with highly mineralized solutions with Fe, Cu, Zn, Cd, As, and Sb at total concentrations of up to 50 g/L. Anomalous zones can be specified as ‘geochemical barriers’ – specific layers where the mobility of the elements is reduced due to pH conditions, redox potential, and Fe(III) hydroxide precipitation. The zones of increased conductivity in oxidized mine tailings indicated local areas with high acid production potential and coexisting acidic pore solution. In non-oxidized tailings, high conductivity of the mineral skeleton was observed. There was a migration of drainage outside the tailings, its direction monitored by geophysical data. Chemical analysis confirmed that the concentrations of As in groundwater samples were higher than the maximum permissible concentration.     

Effect of heavy metals and PAH on soil assessed via dehydrogenase assay

Dehydrogenase enzyme activity (DHA) assay method using resazurin was accommodated for measuring of toxicity of compound contaminants on uncharacterized microbial communities present in any given soil. The method was used to compare the toxic effect of heavy metal and polycyclic aromatic hydrocarbon (PAH) contaminant mixture (Cr, Pb, Cu, Cd, Pyrene) on four typical Estonian soils covering a range of compositions. The method proved to be useable on all soils; the sensitivity of soil microbiology to toxic effect of contaminants was found to have a negative correlation with Ca and organic matter (OM) content and a positive correlation with amorphous phase content of soils.     

Reaction of ortho-methoxybenzoic acid with the water disinfecting agents ozone, chlorine and sodium hypochlorite

Ozone, chlorine and sodium hypochlorite are commonly used as disinfecting agents for drinking water production. The reaction pathways of ozonation and chlorination of o-methoxybenzoic acid in aqueous solution were studied using gas chromatography-mass spectrometry (GC-MS) and high pressure liquid chromatography (HPLC). The results show that less than 1% of o-methoxybenzoic acid remains in reaction. The final major products using ozone oxidation are oxalic and glyoxalic acids. Phenols appear only at insufficient ozone levels. Sodium hypochlorite leads to higher levels of primary products. Molecular chlorine leads to the formation of higher amounts of polychlorinated derivatives. Model experiments allow to propose schemes of o-methoxybenzoic acid transformation under the conditions simulating water treatment processes.     

Multi-component assessment of worker exposures in a copper refinery. Part 1. Environmental monitoring

The exposure characterisation described in this paper for 135 copper refinery workers (45 females, 90 males) focuses on the concentrations of copper, nickel and other trace elements in the inhalable aerosol fractions, as well as in the water-soluble and water-insoluble subfractions. Some information is also provided on the thoracic and respirable aerosol fractions. Further, results are presented for volatile hydrides of arsenic and selenium released in the copper purification steps of the electrorefining process. For the pyrometallurgical operations, a comparison of the geometric means for the inhalable aerosol fraction indicated that water-soluble copper levels were on average 19-fold higher compared to nickel (p < 0.001) and a significant association was evident between them (r = 0.87, p < 0.001); for the insoluble subfraction, the copper : nickel ratio was 12.5 (p < 0.001) and the inter-element correlation had r = 0.98 and p < 0.001. Although for the electrorefinery workers the relative inhalable concentrations of copper and nickel were not significantly different (p > 0.05), the corresponding inter-element associations were: slope of 7.7, r= 0.54, p < or =0.001 for the water-soluble subfraction and slope of 1.3, r = 0.71 and p < or =0.001 for the water-insoluble subfraction. On average, a good proportion of the inhalable copper and nickel were found in the thoracic (40%) and respirable (20%) aerosol fractions. Cobalt air concentrations were generally low with geometric means and 95% confidence intervals of 3.1 (2.4-4.2)microg m(-3) (pyrometallurgical workers) and 0.3 (0.4-0.5) microg m(-3)(electrorefinery workers). Similarly, the maximum concentrations of cadmium and lead were low, respectively 4 and 25 microg m(-3). Of the hydrides, tellurium and antimony could not be detected, but for the arsenic (arsine) and selenium hydrides measurable exposure occurred for almost all electrorefinery workers, although the levels were generally low at 0.2 microg m(-3).     

Correction to: Documenting lemming population change in the Arctic: Can we detect trends?

Ambio - In the original published article, some of the symbols in figure 1A were modified incorrectly during the typesetting and publication process. The correct version of the figure is provided...     

Sorption of pyrene from water by oil shale ash and mineral particles

The aim of this work was to estimate the sorption of pyrene from water solutions on mineral substrates, e.g., alumina, silica, and oil shale ash, from the Estonian thermal plant. Results obtained from this study indicate that the sorption of pyrene on mineral oxides and oil shale ash particles from water can be described with a linear equation. The sorptive capacity per weight of oil shale ash in aqueous systems was significantly lower compared with mineral adsorbents. The distribution coefficient (K_d) for pyrene in the system with particles of oil shale ash was 10–12 times lower as than for mineral adsorbents.