Development and validation of methods for environmental monitoring of cyclophosphamide in workplaces

Methods to monitor contamination of workplaces with antineoplastic drugs have been developed and validated. Cyclophosphamide (CP) was used as a model compound as it is one of the most commonly used antineoplastic drugs. A wipe sampling method to detect contamination with CP at surfaces was developed. A personal air sampling method to sample gas and vapour on solid sorbent tubes and particles with filters was also developed. Wipe and filter samples were extracted and sorbent samples were eluted, all with ethyl acetate. The samples were analysed with liquid chromatography tandem mass spectrometry. (2)H(6)-labelled cyclophosphamide was used as an internal standard. The between-day precision was 2-5% for wipe samples, 4-6% for sorbent samples and 3-8% for filter samples. The limit of detection was 0.02 ng CP per sample for the wipe and filter methods and 0.03 ng CP per sample for the solid sorbent method. Wipe sampling on surfaces made of different materials resulted in mean recoveries between 78-106%. The desorption recovery was between 97-102% for the wipe samples, 97% for the sorbent samples and 101% for the filter samples. Samples were stable for up to 2 months at 5 degrees C and -20 degrees C and for about 2 d at room temperature. The developed methods were applied to the measurement of contamination with CP in a hospital pharmacy. Trace amounts of CP, 1.3 and 1.4 ng, were detected on surfaces in the pharmacy.     

Using digital image projections to visualize forest landscape changes due to management activities and forest growth

A pedagogic problem in forestry and landscape management is to visualize future landscape effects of forest growth and current management activities in the forest. This paper presents a method for forecasting digital image projections of forest landscape dynamics. Static nonlinear regression functions estimate the digital numbers in a Landsat Thematic Mapper image. Regressors used are forest stand variables. By estimating the future forest stand data, based on intermediate treatment and growth, future satellite digital images are created. In a case study example, the future landscape of a forest block in the province of Västernorrland, Sweden, is projected to demonstrate the application of this visualization technique.     

Solar energy for electricity and fuels

Solar energy conversion into electricity by photovoltaic modules is now a mature technology. We discuss the need for materials and device developments using conventional silicon and other materials, pointing to the need to use scalable materials and to reduce the energy payback time. Storage of solar energy can be achieved using the energy of light to produce a fuel. We discuss how this can be achieved in a direct process mimicking the photosynthetic processes, using synthetic organic, inorganic, or hybrid materials for light collection and catalysis. We also briefly discuss challenges and needs for large-scale implementation of direct solar fuel technologies.     

Comment: Investor demand and spot commodity prices

Tilton et al. claim in their article “Investor demand and spot commodity prices” to show that “investor demand can be pushing up a commodity's price even when investor stocks are falling.” In the present comment, it is argued that in both the cases described by Tilton et al., investors are supplying the market, putting physical material into it, rather than adding to demand. Thus, the reasoning by Tilton et al. is not concerned with the phenomenon referred to in the traditional theory, where, in the absence of changes in demand and supply fundamentals, prices rise as a result of increased investor demand for futures contracts.     

How effective are River Basin Management Plans in reaching the nutrient load reduction targets?

Riverine nutrient loads are among the major causes of eutrophication of the Baltic Sea. This study applied the Soil & Water Assessment Tool (SWAT) in three catchments flowing to the Baltic Sea, namely Vantaanjoki (Finland), Fyrisån (Sweden), and Słupia (Poland), to simulate the effectiveness of nutrient control measures included in the EU’s Water Framework Directive River Basin Management Plans (RBMPs). Moreover, we identified similar, coastal, middle-sized catchments to which conclusions from this study could be applicable. The first modelling scenario based on extrapolation of the existing trends affected the modelled nutrient loads by less than 5%. In the second scenario, measures included in RBMPs showed variable effectiveness, ranging from negligible for Słupia to 28% total P load reduction in Vantaanjoki. Adding spatially targeted measures to RBMPs (third scenario) would considerably improve their effectiveness in all three catchments for both total N and P, suggesting a need to adopt targeting more widely in the Baltic Sea countries.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01393-x) contains supplementary material, which is available to authorized users.     

Whiplash-associated disorders in frontal impacts: influencing factors and consequences

This multidisciplinary in-depth investigation of accidents using 24 occupants with neck symptoms shows the complexity of whiplash-associated disorders (WAD) in frontal impacts with respect to factors that influence occurrence as well as duration of symptoms. Several different occupant kinematics have been identified, all resulting in symptoms classified as WAD. Compared to occupants restrained only by a seat belt, occupants with arm resistance influence showed a greater representation of symmetrical neck symptoms. Two cases of unbelted occupants with a neck compression mechanism far from conventional "whiplash" motion were found. Posture as well as physical and psychosocial factors such as strong negative reactions, bad prognosis expectation, and stressed daily activities influenced the duration of symptoms. Occupant characteristics and sitting posture and behavior at the time of impact are important factors when analyzing and understanding WAD.     

Preface

Preface

Preface     

Life cycle assessment of lithium-ion batteries for plug-in hybrid electric vehicles – Critical issues

The main aim of the study was to explore how LCA can be used to optimize the design of lithium-ion batteries for plug-in hybrid electric vehicles. Two lithium-ion batteries, both based on lithium iron phosphate, but using different solvents during cell manufacturing, were studied by means of life cycle assessment, LCA. The general conclusions are limited to results showing robustness against variation in critical data. The study showed that it is environmentally preferable to use water as a solvent instead of N-methyl-2-pyrrolidone, NMP, in the slurry for casting the cathode and anode of lithium-ion batteries. Recent years’ improvements in battery technology, especially related to cycle life, have decreased production phase environmental impacts almost to the level of use phase impacts. In the use phase, environmental impacts related to internal battery efficiency are two to six times larger than the impact from losses due to battery weight in plug-in hybrid electric vehicles, assuming 90% internal battery efficiency. Thus, internal battery efficiency is a very important parameter; at least as important as battery weight. Areas, in which data is missing or inadequate and the environmental impact is or may be significant, include: production of binders, production of lithium salts, cell manufacturing and assembly, the relationship between weight of vehicle and vehicle energy consumption, information about internal battery efficiency and recycling of lithium-ion batteries based on lithium iron phosphate.     

Pheromone of the elm bark beetle Scolytus laevis (Coleoptera: Scolytidae): stereoisomers of 4-methyl-3-heptanol reduce interspecific competition

Stereoisomers of 4-methyl-3-heptanol (MH) are pheromone components of several Scolytus bark beetles. The elm bark beetle Scolytus laevis (Coleoptera: Scolytidae) has in previous studies been caught in traps baited with commercial MH containing all four stereoisomers, but the lure has been considered a weak attractant. In this study, we addressed the question whether stereospecific responses by S. laevis to stereoisomers of MH might contribute to its niche separation from other sympatric Scolytus species. Using GC–MS, we analyzed extracts of hindguts and abdomens from male and female S. laevis and the sympatric S. triarmatus. We also tested all four MH-stereoisomers individually and in combinations in the field to determine their role for S. laevis. All four stereoisomers were synthesized via a boronic ester method with 1,2-dicyclohexylethanediol as chiral director. In addition, the (3S,4R)-stereoisomer of MH was prepared through enantioselective, lipase-mediated transesterification of a mixture of the four stereoisomers of MH. Females of both species contained small amounts of syn-MH, and males contained trace amounts of anti-MH. The anti stereoisomer (3R,4S)-MH was attractive to male and female S. laevis, whereas the syn stereoisomer (3S,4S)-MH acted as an inhibitor or deterrent and reduced the catch when added to the attractive isomer. The syn isomer is the main aggregation pheromone component of the larger and sympatric S. scolytus and possibly also of S. triarmatus. The avoidance response of S. laevis to the (3S,4S)-stereoisomer may reduce interspecific competition for host trees.