Isolation and Identification of Enterococci from Seawater Samples: Assessment of Their Resistance to Antibiotics and Heavy Metals

A hundred Enterococcus strains were isolated from seawater samples collected from coastal areas of Istanbul. Isolates were identified to the species level using standard biochemical tests specified by Facklam and Collins. The species distribution was as follows Enterococcus faecalis (96%), Enterococcus gallinarum (3%) and Enterococcus solitarius (1%). The resistance of bacteria to both heavy metals (zinc [Zn], iron [Fe], cadmium [Cd], chrome [Cr], cobalt [Co]) and antibiotics (ampicillin 10 μg [AP], penicillin G 10 Units [PG], gentamycin 10 μg [GM], streptomycin 10 μg [S], chloramphenicol 10 μg [C], erythromycin 15 μg [E], kanamycin 30 μg [K], amikacin 30 μg [AK], nalidixic acid 30 μg [NA], and vancomycin 30 μg [VA]) was evaluated. None of the strains was resistant to VA. It was found that among the 100 isolates, those that exhibit resistance to antibiotics, particularly NA, S and K, were also resistant all the heavy metals tested. To our knowledge this is the first report focusing on determination of resistance of environmental enterococci found in Istanbul against heavy metals and antibiotics. Thus, combined expressions of antibiotic and heavy metal resistance may help to reinforce ecological and epidemiological studies and to determine the role of these strains in antibiotic and heavy metal resistance dissemination.     

Levels of organohalogenated persistent pollutants in human milk from Kahramanmaraş region, Turkey

The levels of 1,1,1-trichloro-bis-2,2'-(4-chlorophenyl) ethane (p,p'-DDT) and its metabolites, hexachlorobenzene (HCB), hexachlorocyclohexane isomers (HCHs), chlordanes (trans- and cis-chlordane, oxychlordane and trans-nonachlor), 11 polychlorinated biphenyl (PCB) congeners, and 7 polybrominated diphenyl ether (PBDE) congeners were measured in 37 individual human milk samples from Kahramanmara? region, Turkey. Organochlorine pesticides were the major contaminants in the milk samples. p,p'-DDE and p,p'-DDT were detected in all samples, while beta-HCH had a detection frequency of 97%. The sum of the DDTs in human milk samples varied between 0.52 and 315.8 ng/g wet weight (ww) with a mean ratio between p,p'-DDE and p,p'-DDT equal to 31.1. p,p'-DDD could be measured only in six samples. beta-HCH was the most prevalent HCH isomer with a mean value of 2.08 ng/g ww. The mean concentration of gamma-HCH was 0.38 ng/g ww, while alpha-HCH was not detected in any sample. HCB is found in 95% of the milk samples with a mean concentration of 0.30 ng/g ww. The mean value for the sum of chlordanes was 0.39 ng/g ww, with oxychlordane and trans-nonachlor being the principal contributors. PCBs could be measured only in 8 out of 37 samples and their concentration ranged between <0.15 and 1.92 ng/g ww for the sum of PCBs. PCB profiles were dominated by congeners 153, 180 and 138. PBDEs were detected only in 3 out of 37 samples, with the highest value being 0.014 ng/g ww (0.40 ng/g lipid weight) and BDE 47 was the dominant congener. Although the number of samples is relatively low and they are not representative for the whole Turkish population, the results of the present study are important to provide additional data on the concentrations of persistent organochlorinated pollutants in Turkey and show as first the PBDE levels in Turkish population.     

Histopathological effects of carbaryl on testes of snake-eyed lizard, Ophisops elegans

Background, aim and scope  

Due to their ecological niche and insectivore nature, lizards are of increased risk of exposure to pesticides in agricultural areas. In addition to their potential direct effects on non-target species, insecticides can also result in indirect impacts on lizard population by reducing their food source. Carbaryl is a common insecticide that is widely used in areas of Turkey that are home to a variety of reptiles. However, to date, little is known about the potential effects of the exposure of reptiles such as lizards or snakes to this pesticide. The aim of the study was to investigate toxic effects of carbaryl on the testes of snake-eyed lizard, Ophisops elegans that is common to regions in Turkey where Carbaryl is applied and that it can be easily cultured in the laboratory.     

Dynamic equilibrium of radiocesium with stable cesium within the soil-mushroom system in Turkish pine forest

Mushrooms and soils collected from pine forests in Izmir, Turkey were measured for radiocesium and stable Cs in 2002. The ranges of (137)Cs and stable Cs concentrations in mushrooms were 9.84+/-1.67 to 401+/-3.85Bqkg(-1) dry weight and 0.040+/-0.004 to 11.3+/-1.09mgkg(-1) dry weight, respectively. The concentrations of (137)Cs and stable Cs in soils were 0.29+/-0.18 to 161+/-1.12Bqkg(-1) dry weight and 0.14+/-0.004 to 1.44+/-0.045mgkg(-1) dry weight, respectively. Even though different species were included, the concentration ratios of (137)Cs to stable Cs were fairly constant for samples collected at the same forest site, and were in the same order of magnitude as the (137)Cs to stable Cs ratios for the organic soil layers. The soil-to-mushroom transfer factors of (137)Cs and stable Cs were in the range of 0.19-3.15 and 0.17-12.3, respectively. The transfer factors of (137)Cs were significantly correlated to those of stable Cs.     

Use of carbonised beet pulp carbon for removal of Remazol Turquoise Blue-G 133 from aqueous solution

Carbonised beet pulp (BPC) produced from agricultural solid waste by-product in sugar industry was used as adsorbent for the removal of Remazol Turquoise Blue-G 133 (RTB-G 133) dye in this study. The kinetics and equilibrium of sorption process were investigated with respect to pH, temperature and initial dye concentration. Adsorption studies with real textile wastewater were also performed. The results showed that adsorption was a strongly pH-dependent process, and optimum pH was determined as 1.0. The maximum dye adsorption capacity was obtained as 47.0 mg g^?1at the temperature of 25 °C at this pH value. The Freundlich and Langmuir adsorption models were used for describing the adsorption equilibrium data of the dye, and isotherm constants were evaluated depending on sorption temperature. Equilibrium data of RTB-G 133 sorption fitted very well to the Freundlich isotherm. Mass transfer and kinetic models were applied to the experimental data to examine the mechanisms of adsorption and potential rate-controlling steps. It was found that both external mass transfer and intra-particle diffusion played an important role in the adsorption mechanisms of dye and adsorption kinetics followed the pseudo second-order type kinetic model. The thermodynamic analysis indicated that the sorption process was exothermic and spontaneous in nature.     

Utilization of gold tailings as an additive in Portland cement.

Mine tailings are formed as an industrial waste during coal and ore mining and processing. In the investigated process, following the extraction of gold from the ore, the remaining tailings are subjected to a two-stage chemical treatment in order to destroy the free cyanide and to stabilize and coagulate heavy metals prior to discharge into the tailings pond. The aim of this study was the investigation of the feasibility of utilization of the tailings as an additive material in Portland cement production. For this purpose, the effects of the tailings on the compressive strength properties of the ordinary Portland cement were investigated. Chemical and physical properties, mineralogical composition, particle size distribution and microstructure of the tailings were determined by Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD), particle size analyzer (Mastersizer) and scanning electron microscope (SEM). Following the characterization of the tailings, cement mortars were prepared by intergrinding Portland cement with dried tailings. Composition of the cement clinkers were adjusted to contain 5, 15, 25% (wt/wt) dried tailings and also silica fume and fly ash samples (C and F type) were added to clinker in different ratios. The mortars produced with different amounts of tailings, silica fume, fly ashes and also mixtures of them were tested for compressive strength values after 2, 7, 28 and 56 days according to the European Standard (EN 196-1). The results indicated that gold tailings up to 25% in clinker could be beneficially used as an additive in Portland cement production. It is suggested that the gold tailings used in the cement are blended with silica fume and C-type fly ash to obtain higher compressive strength values.     

Use of natural clinoptilolite to improve water quality: sorption and selectivity studies of lead(II), copper(II), zinc(II), and nickel(II).

Natural clinoptilolite can be used as an ion exchanger for removal of heavy metals and treatment of environmental pollution because of its desirable characteristics of high ion exchange selectivity and resistance to different media. In this work, the potential of natural clinoptilolite from G?rdes mines (West Anatolia, Turkey) for the uptake of lead(II), nickel(II), copper(II), and zinc(II), from their single and mixed ion solutions, was evaluated using the batch method. The mineralogical and chemical properties of the sorption material were carried out by X-ray diffraction, X-ray fluoremetry, scanning electron microscopy, and wet analysis. Contact time, initial solution pH, solid-to-liquid ratio, and initial metal cation concentration were determined as single ion sorption parameters. The silicon/aluminum ratio and the theoretical and equivalent exchange capacities, both in single and mixed solutions, were established. Corresponding adsorption constants and distribution coefficients have been found.