Assessment of tap water quality and corrosion scales from the selected distribution systems in northern Pakistan

Corrosion deposits formed within drinking water distribution systems deteriorate drinking water quality and resultantly cause public health consequences. In the present study, an attempt was made to investigate the concurrent conditions of corrosion scales and the drinking water quality in selected water supply schemes (WSS) in districts Chitral, Peshawar, and Abbottabad, northern Pakistan. Characterization analyses of the corrosion by-products revealed the presence of α-FeOOH, γ-FeOOH, Fe₃O₄, and SiO₂ as major constituents with different proportions. The constituents of all the representative XRD peaks of Peshawar WSS were found insignificant as compared to other WSS, and the reason could be the variation of source water quality. Well-crystallized particles in SEM images indicated the formation of dense oxide layer on corrosion by-products. A wider asymmetric vibration peak of SiO₂ appeared only in Chitral and Abbottabad WSS, which demonstrated higher siltation in the water source. One-way ANOVA analysis showed significant variations in pH, turbidity, TDS, K, Mg, PO₄, Cl, and SO₄ values, which revealed that these parameters differently contributed to the source water quality. Findings from this study suggested the implementation of proper corrosion prevention measures and the establishment of international collaboration for best corrosion practices, expertise, and developing standards.     

The effect of nutrients shortage on plant’s efficiency to capture solar radiations under semi-arid environments

Radiation use efficiency (RUE) is considered critical for calculation of crop yield. The crop productivity can be improved by increasing the interception of solar radiation and maintaining higher RUE for plants. Irrigation water and nitrogen (N) supply are the main limiting factors for RUE in maize (Zea mays L.) across the semi-arid environments. Field experiments were conducted during two consecutive growing seasons (2009–2010) to optimize RUE in relation to N application timings and rates with varying irrigation water management practices. In experiment 1, three N application timings were made, while in experiment 2, three possible water management practices were used. In both experiments, five N rates (100, 150, 200, 250, and 300 kg N ha⁻¹) were applied to evaluate the effects of irrigation water and N on cumulative photosynthetic active radiation (PARi), dry matter RUE (RUE_DM), and grain yield RUE (RUE_GY). The results demonstrated that cumulative PARi and RUEs were not constant during the plant growth under varying the nutrients. The water and N significantly influenced cumulative PARi and RUEs during the both growing seasons. In experiment 1, the maximum cumulative PARi was observed by application of 250 kg N ha⁻¹ in three splits (1/3 N at V2, 1/3 N at V16, and 1/3 N at R1 stage), and the highest RUE_DM was achieved by the application of 300 kg N ha⁻¹. However, the highest RUE_GY was observed by application of 250 kg N ha⁻¹. In experiment 2, the maximum cumulative PARi was attained at normal irrigation regime with 250 kg N ha⁻¹, while the highest RUE_DM and RUE_GY were recorded at normal irrigation regime with the application of 300 kg N ha⁻¹. The regression analysis showed significant and positive correlation of RUE_GY with grain yield. Therefore, optimum water and N doses are important for attaining higher RUE, which may enhance maize grain yield semi-arid environment; this may be considered in formulating good agricultural practices for the environmental conditions resembling to those of this study.

     

Impact of economic policy uncertainty on CO2 emissions: evidence from top ten carbon emitter countries

Environmental Science and Pollution Research - Over the last few decades, economic policy uncertainty (EPU) has surged across the globe. Furthermore, EPU affects economic activities, which may also...     

Biomonitoring of heavy metals in the feathers of House crow (Corvus splendens) from some metropolitans of Asia and Africa

Environmental Science and Pollution Research - Urban-dwelling birds can be useful biomonitors to assess the impact of the urbanisation on both public and wildlife health. Widely distributed urban...     

The influence of salinity on the rate of photosynthesis and abundance of some tropical phytoplankton

Several species of phytoplankton were grown in unialgal, but not bacteria-free, cultures. These clones when exposed to varying salinities, from 5 to 35, showed a marked increase in their rates of photosynthesis at low salinities. The optimum requirement of salinity, however, varied in different species. Observations on the relative abundance of phytoplankton in an estuary, where the salinity changes were fairly large, confirmed that, within limits, waters with low salinities support a greater abundance of phytoplankton in nature. The wide adaptability of phytoplankton to changes in salinity corresponds to the conditions brought about by the monsoon system along the southwest coast of India, where large dilutions are associated with the enrichment of water with nutrients.     

The effect of nitroaromatics' composition on their toxicity in vivo: novel, efficient non-additive 1D QSAR analysis

Novel 1D QSAR approach that allows analysis of non-additive effects of molecular fragments on toxicity has been proposed. Twenty-eight nitroaromatic compounds including some well-known explosives have been chosen for this study. The 50% lethal dose concentration for rats (LD50) was used as the estimation of toxicity in vivo to develop 1D QSAR models on the framework of Simplex representation of molecular structure. The results of 1D QSAR analysis show that even the information about the composition of molecules provides the main trends of toxicity changes. The necessity of consideration of substituents' mutual impacts for the development of adequate QSAR models of nitroaromatics' toxicity was demonstrated. Statistic characteristics for all the developed partial least squares QSAR models, except the additive ones are quite satisfactory (R2=0.81-0.92; Q2=0.64-0.83; R2 test=0.84-0.87). A successful performance of such models is due to their non-additivity i.e. possibility of taking into account the mutual influence of substituents in benzene ring which plays the governing role for toxicity change and could be mediated through the different C-H fragments of the ring. The correspondence between observed and predicted by these models toxicity values is good. This allowing combine advantages of such approaches and develop adequate consensus model that can be used as a toxicity virtual screening tool.     

Bioaccumulation and elimination of copper in the rock oyster Crassostrea cucullata

The kinetics of copper bioaccumulation in the rock oyster Crassostrea cucullata Born showed that the initial rate of uptake was directly related to metal concentration in the medium. As the accumulation in the tissues increased, the oysters remained closed and the uptake rate fell. At the end of 7 weeks, the average copper concentrations in the tissue were 60.42 g g^-1 and 63.97 g g^-1 wet weight in the 0.01 and 0.05 ppm experimental groups, respectively. The net rate of uptake ranged from 1.76 to 1.97 g g^-1 week^-1 and the rate of copper loss, measured after transferring the oysters into natural sea water, was dependent on the original cooper concentration in the soft parts. The concentration of copper in the tissues declined by 37.38 and 36.56% in the 0.01 and 0.05 ppm experimental groups, respectively. Even after a 7 week period of depuration (self-purification) there was some residual copper left in the tissue. This indicates that accumulation occurs in the tissue more rapidly than cleansing can eliminate it.     

A review of the global climate change impacts,adaptation, and sustainable mitigation measures

Environmental Science and Pollution Research - Climate change is a long-lasting change in the weather arrays across tropics to polls. It is a global threat that has embarked on to put stress on...     

The effect of intensity and quality of illumination on the photosynthesis of some tropical marine phytoplankton

Using solar energy as a source of illumination, photosynthesis in 11 species of marine plankton algae was studied as a function of light intensity. From the photosynthesis-light curve for each organism, the saturation points (I _k ) in different organisms were determined. Among the diatoms and flagellates, the highest I _k (saturation point) values were found in Rhizosolenia styliformis and Dinophysis miles respectively. When the organisms were exposed to a portion of the visible spectrum starting from 700 m, the photosynthesis was found to be related to the radiant energy. The missing portions of the spectrum produced no significant change in the rate of photosynthesis. The photosynthetic response shown by the different organisms was strikingly similar, which signifies that, despite the qualitative dissimilarities which the organisms may possess in their pigment composition, they are capable of much chromatic adaptation.     

Influence of aeration rate and reactor shape on the composting of poultry manure and sawdust

To achieve successful composting, all the biological, chemical, and physical characteristics need to be considered. The investigation of our study was based on various physicochemical properties, i.e., temperature, ammonia concentration, carbon dioxide concentration, pH, electrical conductivity (EC), carbon/nitrogen (C/N) ratio, organic matter (OM) content, moisture content, bacterial population, and seed germination index (GI), during the composting of poultry manure and sawdust for different aeration rates and reactor shapes. Three cylindrical-shaped and three rectangular-shaped pilot-scale 60-L composting reactors were used in this study, with aeration rates of 0.3 (low), 0.6 (medium), and 0.9 (high) L min^?1 kg^?1 DM (dry matter). All parameters were monitored over 21 days of composting. Results showed that the low aeration rate (0.3 L min^?1 kg^?1 DM) corresponded to a higher and longer thermophilic phase than did the high aeration rate (0.9 L min^?1 kg^?1 DM). Ammonia and carbon dioxide volatilization were directly related to the temperature profile of the substrate, with significant differences between the low and high aeration rates during weeks 2 and 3 of composting but no significant difference observed during week 1. At the end of our study, the final values of pH, EC, moisture content, C/N ratio, and organic matter in all compost reactors were lower than those at the start. The growth rates of mesophilic and thermophilic bacteria were directly correlated with mesophilic and thermophilic conditions of the compost. The final GI of the cylindrical reactor with an airflow rate of 0.3 L min^?1 kg^?1 DM was 82.3%, whereas the GIs of the other compost reactors were below 80%. In this study, compost of a cylindrical reactor with a low aeration rate (0.3 L min^?1 kg^?1 DM) was more stable and mature than the other reactors.

Implications: The poultry industry is growing in South Korea, but there are problems associated with the management of poultry manure, and composting is one solution that could be valuable for crops and forage if managed properly. For high-quality composting, the aeration rate in different reactor shapes must be considered. The objective of this study was to investigate various physicochemical properties with different aeration rates and rector shapes. Results showed that aeration rate of 0.3 L min^?1 kg^?1 DM in a cylindrical reactor provides better condition for maturation of compost.