The recovery of ammonia and hydrogen sulfide from ground-level area sources using dynamic isolation flux chambers: bench-scale studies

Controlled bench-scale laboratory experiments were conducted to evaluate the recovery of ammonia (NH3) and hydrogen sulfide (H2S) from dynamic isolation flux chambers. H2S (80-4000 ppb) and NH3 (5000-40,000 ppb) samples were diffused through the flux chamber to simulate ground level area source emissions while measuring the inlet and outlet flux chamber concentrations simultaneously. Results showed that the recovery of H2S during a 30-min sampling time was almost complete for concentrations >2000 ppb. At the lowest concentration of 80 ppb, 92.55% of the H2S could be recovered during the given sampling period. NH3 emissions exhibited similar behavior between concentrations of 5000-40,000 ppb. Within the 30-min sampling period, 92.62% of the 5000-ppb NH3 sample could be recovered. Complete recovery was achieved for concentrations >40,000 ppb. Predictive equations were developed for gas adsorption. From these equations, the maximum difference between chamber inlet and outlet concentrations of NH3 or H2S was predicted to be 7.5% at the lowest concentration used for either gas. In the calculation of emission factors for NH3 and H2S, no adsorption correction factor is recommended for concentrations >37,500 ppb and 2100 ppb for NH3 and H2S, respectively. The reported differences in outlet and inlet concentration above these ranges are outside the fullscale sensitivity of the gas sensing equipment. The use of 46-90 m of Teflon tubing with the flux chambers has apparently no effect on gas adsorption, because recovery was completed almost instantaneously at the beginning of the tests.     

Geochemical fractionation and spectroscopic fingerprinting for evaluation of the environmental transformation of potentially toxic metal(oid)s in surface–subsurface soils

Environmental Geochemistry and Health - The contamination of soil by toxic metal(oid)s has emerged as a major concern worldwide, particularly in developing countries. A metals behavior in the soil...     

The Recovery of Ammonia and Hydrogen Sulflde from Ground-Level Area Sources Using Dynamic Isolation Flux Chambers: Bench-Scale Studies

Abstract

Controlled bench-scale laboratory experiments were conducted to evaluate the recovery of ammonia (NH₃) and hydrogen sulflde (H₂S) from dynamic isolation flux chambers. H₂S (80–4000 ppb) and NH₃ (5000–40,000 ppb) samples were diffused through the flux chamber to simulate ground level area source emissions while measuring the inlet and outlet flux chamber concentrations simultaneously. Results showed that the recovery of H₂S during a 30-min sampling time was almost complete for concentrations >2000 ppb. At the lowest concentration of 80 ppb, 92.55% of the H₂S could be recovered during the given sampling period. NH₃ emissions exhibited similar behavior between concentrations of 5000–40,000 ppb. Within the 30-min sampling period, 92.62% of the 5000-ppb NH₃ sample could be recovered. Complete recovery was achieved for concentrations >40,000 ppb. Predictive equations were developed for gas adsorption. From these equations, the maximum difference between chamber inlet and outlet concentrations of NH₃ or H₂S was predicted to be 7.5% at the lowest concentration used for either gas. In the calculation of emission factors for NH₃ and H₂S, no adsorption correction factor is recommended for concentrations >37,500 ppb and 2100 ppb for NH₃ and H₂S, respectively. The reported differences in outlet and inlet concentration above these ranges are outside the full-scale sensitivity of the gas sensing equipment. The use of 46–90 m of Teflon tubing with the flux chambers has apparently no effect on gas adsorption, because recovery was completed almost instantaneously at the beginning of the tests.     

Trace element partitioning in ashes from boilers firing pure wood or mixtures of solid waste with respect to fuel composition,chlorine content and temperature

Trace element partitioning in solid waste (household waste, industrial waste, waste wood chips and waste mixtures) incineration residues was investigated. Samples of fly ash and bottom ash were collected from six incineration facilities across Sweden including two grate fired and four fluidized bed incinerators, to have a variation in the input fuel composition (from pure biofuel to mixture of waste) and different temperature boiler conditions. As trace element concentrations in the input waste at the same facilities have already been analyzed, the present study focuses on the concentration of trace elements in the waste fuel, their distribution in the incineration residues with respect to chlorine content of waste and combustion temperature.Results indicate that Zn, Cu and Pb are dominating trace elements in the waste fuel. Highly volatile elements mercury and cadmium are mainly found in fly ash in all cases; 2/3 of lead also end up in fly ash while Zn, As and Sb show a large variation in distribution with most of them residing in the fly ash. Lithophilic elements such as copper and chromium are mainly found in bottom ash from grate fired facilities while partition mostly into fly ash from fluidized bed incinerators, especially for plants fuelled by waste wood or ordinary wood chips. There is no specific correlation between input concentration of an element in the waste fuel and fraction partitioned to fly ash. Temperature and chlorine content have significant effects on partitioning characteristics by increasing the formation and vaporization of highly volatile metal chlorides. Zinc and cadmium concentrations in fly ash increase with the incineration temperature.     

GROUPWISE MODELING STUDY OF BACTERIALLY IMPAIRED WATERSHEDS IN TEXAS: CLUSTERING ANALYSIS1

ABSTRACT: Under the Clean Water Act (CWA) program, the Texas Commission on Environmental Quality (TCEQ) listed 110 stream segments in the year 2000 with pathogenic bacteria impairment. A study was conducted to evaluate the probable sources of pollution and characterize the watersheds associated with these impaired water bodies. The primary aim of the study was to group the water bodies into clusters having similar watershed characteristics and to examine the possibility of studying them as a group by choosing models for total maximum daily load (TMDL) development based on their characteristics. This approach will help to identify possible sources and determine appropriate models and hence reduce the number of required TMDL studies. This in turn will help in reducing the effort required to restore the health of the impaired water bodies in Texas. The main characteristics considered for the classification of water bodies were land use distribution within the watershed, density of stream network, average distance of land of a particular use to the closest stream, household population, density of on‐site sewage facilities (OSSFs), bacterial loading from different types of farm animals and wildlife, and average climatic conditions. The climatic data and observed instream fecal coliform bacteria concentrations were analyzed to evaluate seasonal variability of instream water quality. The grouping of water bodies was carried out using the multivariate statistical techniques of factor analysis/principal component analysis, cluster analysis, and discriminant analysis. The multivariate statistical analysis resulted in six clusters of water bodies. The main factors that differentiated the clusters were found to be bacterial contribution from farm animals and wildlife, density of OSSFs, density of households connected to public sewers, and land use distribution.     

A mini-review on rare earth metal-doped TiO<Subscript>2</Subscript> for photocatalytic remediation of wastewater

Titanium dioxide (TiO₂) has been considered a useful material for the treatment of wastewater due to its non-toxic character, chemical stability and excellent electrical and optical properties which contribute in its wide range of applications, particularly in environmental remediation technology. However, the wide band gap of TiO₂ photocatalyst (anatase phase, 3.20 eV) limits its photocatalytic activity to the ultraviolet region of light. Besides that, the electron-hole pair recombination has been found to reduce the efficiency of the photocatalyst. To overcome these problems, tailoring of TiO₂ surface with rare earth metals to improve its surface, optical and photocatalytic properties has been investigated by many researchers. The surface modifications with rare earth metals proved to enhance the efficiency of TiO₂ photocatalyts by way of reducing the band gap by shifting the working wavelength to the visible region and inhibiting the anatase-to-rutile phase transformations. This review paper summarises the attempts on modification of TiO₂ using rare earth metals describing their effect on the photocatalytic activities of the modified TiO₂ photocatalyst.     

Determining seasonal greenhouse gas emissions from ground-level area sources in a dairy operation in central Texas

Greenhouse gas (GHG) emissions from agricultural production operations are recognized as an important air quality issue. A new technique following the U.S. Environmental Protection Agency Method TO-14A was used to measure GHG emissions from ground-level area sources (GLAS) in a free-stall dairy operation in central Texas. The objective of this study was to quantify and report GHG emission rates (ERs) from the dairy during the summer and winter using this protocol. A weeklong sampling was performed during each season. A total of 75 and 66 chromatograms of air samples were acquired from six delineated GLAS (loafing pen, walkway, barn, silage pile, settling basin, and lagoon) of the same dairy during summer and winter, respectively. Three primary GHGs--methane (CH4), carbon dioxide (CO2), and nitrous oxide (N2O)--were identified from the dairy operation during the sampling periods. The estimated overall ERs for CH4, CO2, and N2O during the summer for this dairy were 274, 6005, and 7.96 g head(-1)day(-1), respectively. During the winter, the estimated overall CH4, CO2, and N2O ERs were 52, 7471, and 3.59 g head(-1)day(-1), respectively. The overall CH4 and N2O ERs during the summer were approximately 5.3 and 2.2 times higher than those in the winter for the free-stall dairy. These seasonal variations were likely due to fluctuations in ambient temperature, dairy manure loading rates, and manure microbial activity of GLAS. The annualized ERs for CH4, CO2, and N2O for this dairy were estimated to be 181, 6612, and 6.13 g head(-1)day(-1), respectively. Total GHG emissions calculated for this dairy with 500 cows were 2250 t of carbon dioxide equivalent (CO2e) per year.     

Increasing water productivity,nitrogen economy,and grain yield of rice by water saving irrigation and fertilizer-N management

Environmental Science and Pollution Research - The looming water resources worldwide necessitate the development of water-saving technologies in rice production. An open greenhouse experiment was...     

Removing ammonia from air with a constant pH,slightly acidic water spray wet scrubber using recycled scrubbing solution

Slightly acidic solutions are a practical means of removing ammonia from air Scrubbed NH₃ accumulates in solution as NH₄⁺ and should be an excellent fertilizer Increased air velocity decreased NH₃ removal and increased NH₄⁺ collection Previous research on wet scrubbers has only studied highly acidic scrubbing solutions because of their high ammonia capture efficiencies; however, the high acidity created practical problems. Lower acidity solutions would reduce corrosion, maintenance, and cost; however, designers may need to use strategies for increasing scrubber effectiveness, such as using lower air velocities. The objective of this study was to determine if a spray scrubber with slightly acidic and higher pH scrubbing solution (pH from 2 to 8) could effectively remove NH₃ from NH₃ laden air (such as animal building exhaust air), and also collect this valuable resource for later use as a fertilizer. A bench-scale spray wet scrubber treated 20 ppmv NH₃/air mixture in a countercurrent contact chamber. First, the solution pH was varied from 2 to 8 while maintaining constant air velocity at 1.3 m·s⁻¹. Next, air velocity was increased (2 and 3 m·s⁻¹) while solution pH remained constant at pH6. At 1.3 m·s⁻¹, NH₃ removal efficiencies ranged between 49.0% (pH8) and 84.3% (pH2). This study has shown that slightly acidic scrubbing solutions are a practical means of removing ammonia from air especially if the scrubber is designed to increase collisions between solution droplets and NH₃ molecules. The NH₃ removed from the air was held in solution as NH₄⁺ and accumulates over time so the solution should be an excellent fertilizer.     

Correction to: Increasing water productivity,nitrogen economy,and grain yield of rice by water saving irrigation and fertilizer-N management

Environmental Science and Pollution Research - The original publication of this paper contains a mistake.