Skin prick test reactivity in allergic rhinitis patients to airborne pollens

The aim was to investigate the impact of atmospheric pollen in determining allergic rhinitis. It was conducted with 130 patients with allergic rhinitis in three different sites in Eskisehir, Turkey, in 2000-2001, using a gravimetric method with a Durham sampler. Skin prick test results, the symptoms of patients and their findings all confirmed the presence of allergic reactions to pollen allergens in the patients observed. During the period, a total of 47,082 pollen grains/cm(2) belonging to 45 taxa were recorded. Of the total pollen grains, 81.0% were arboreal and 18% non-arboreal. The majority of the investigated pollen grains were from Pinaceae, Salix spp., Chenopodiaceae/Amaranthaceae, Cupressaceae and Poaceae. Pollen concentrations reached the highest level in May (54.36%). The pollen allergens provoking severe sensitization were grasscereal mixtures (58.5%), followed by arboreals (33.8%). All patients (100.0%) were sensitive to grass. This study emphasizes the significance of determining the types and concentrations of pollen with a view to comparing changes in highly concentrated allergens.     

Solid-phase extraction of Mn(II) and slurry analysis of the sorbent by electrothermal atomic absorption spectrometry

In this study, a challenging preconcentration/separation method based on the sorption of manganese on ethylene glycol dimethacrylatemethacrylic acid copolymer (EGDMA-MA) treated with ammonium pyrrolidine dithiocarbamate (APDC) and its slurry analysis by electrothermal atomic absorption spectrometry was described. Optimum conditions for quantitative sorption, as well as for preparing a homogeneous and stable slurry were investigated. A 100-fold enrichment factor could be reached. The analyte element in certified sea-water and bovine-liver samples were determined in the range of 95% confidence level. The proposed technique is fast, simple, and the risk of contamination is low. The limit of detection of the method for manganese in the slurry of the blank subjected to the proposed procedure was 0.07 μg L^?1 (3δ, N:10) corresponding to 0.56 μg kg^?1 slurry.     

Removal of phenol by activated carbons prepared from palm oil mill effluent sludge

The study was attempted to produce activated carbons from palm oil mill effluent （POME） sludge. The adsorption capacity of the activated carbons produced was evaluated in aqueous solution of phenol. Two types of activation were followed, namely, thermal activation at 300, 500 and 800%, and physical activation at 150% （boiling treatment）. A control （raw POME sludge） was used to compare the adsorption capacity of the activated carbons produced. The results indicated that the activation temperature of 800℃ showed maximum absorption capacity by the activated carbon （POME 800） in aqueous solution of phenol. Batch adsorption studies showed an equilibrium time of 6 h for the activated carbon of POME 800. It was observed that the adsorption capacity was higher at lower values ofpH （2--3） and higher value of initial concentration of phenol （200--300 mg/L）, The equilibrium data were fitted by the Langmuir and Freundlich adsorption isotherms. The adsorption of phenol onto the activated carbon POME 800 was studied in terms of pseudo-first and second order kinetics to predict the rate constant and equilibrium capacity with the effect of initial phenol concentrations. The rate of adsorption was found to be better correlation for the pseudo-second order kinetics compared to the first order kinetics.     

Trace element biomonitoring by leaves of Populus nigra L. from Western Anatolia, Turkey

The West Anatolian Region is one of the most important areas for industrialization, population density and traffic in Turkey. Therefore, the leaves of Populus nigra L. (Salicaceae), which are used as biomonitor to investigate the levels of the trace elements Cd, Pb, Fe, Zn and Cu, were sampled at 30 locations having different pollution levels in the region. The concentrations of elements were determined by atomic absorption spectrometry. The samples were collected at both reference and contaminated locations where iron was found as the priority element. The strong association between a gradient of contamination and concentration in all samples tested indicates that they are reflecting well the environmental changes, and that they appear as appropriate biological indicators of heavy metal contamination.     

Investigation of the effects of battery types and power management algorithms on drive cycle simulation for a range-extended electric vehicle powertrain

Fuel cell (FC) hybrid vehicle power trains are an attractive technology especially for automotive applications because of their higher efficiency and lower emissions compared to conventional vehicles. This study focuses on the design of an FC hybrid power train system and evaluation of its simulations for a given speed profile through two alternative power management algorithms (PMAs). Parameters suitable for a small vehicle were taken into consideration in the mathematical model of the vehicle. The proposed hybrid power train consists of an energy storage system, composed of a 4-kg battery pack (either lithium-ion (Li-ion) battery, nickel metal hydride, or nickel–cadmium) and a direct methanol fuel cell (DMFC) as the range extender. The PMAs basically aim to fulfill the power requirements of the vehicle and decide how to command the power split between the battery and the FC. The model comprising a DMFC, a battery, and PMAs was developed in MATLAB/Simulink environment. The polarization curve of the FC was obtained using a one-dimensional DMFC model. Vehicle power requirements for a drive cycle were calculated using the equations of longitudinal dynamics of vehicle, and the results were integrated into MATLAB/Simulink model. As a result of the simulations, methanol consumption, state of charge of the battery, and power output of the FC were compared for the PMAs. This comparison shows the effect of PMAs on the hybrid vehicle performance for three battery types. The results indicate that the vehicle range could be increased when proper strategy is used as PMA.     

Effects of cold stratification on germination rate and percentage of caper (Capparis ovata Desf.) seeds

Caper is an important plant because of its high adaptability to marginal agriculture fields that are not suitable for agricultural crops. Different parts of caper such as roots, fruits, flowers and buds can be used to increase the inhabitant's income. The goal of this research is to determine germination rate and percentage of caper according to different duration of cold stratification (10, 20, 30, 40, 50 and 60 days) treatments. Cold stratification procedures under greenhouse condition were applied for eliminating seed dormancy to find the most suitable germination conditions because the presence of seed dormancy causes difficulties in seedling production. The seed germination started and stopped 21 and 57 days after sowing, respectively. While the highest germination percentage (46.6%) was obtained in seeds that were cold stratified for 60 days, the lowest germination percentage (3.6 7%) was determined in control seeds.     

Optimization of activated carbon production from empty fruit bunch fibers in one-step steam pyrolysis for cadmium removal from aqueous solution

The fast growth of the palm oil industry in Malaysia is associated with various waste products, namely the empty fruit bunches (EFB), which have a negative impact on the environment. Therefore, these wastes were utilized as a cheap raw material for the production of activated carbon (AC) with less energy consumption. One-step steam pyrolysis was used to produce AC from oil palm empty fruit bunch fibers (EFBF) by varying the operating parameters of temperature, steam flow rate, and activation time using two-level full factorial experimental design (FFD). Ten samples of AC were prepared and the optimized production conditions were chosen based on the ability to adsorb and remove cadmium. Physical activation comprised of carbonization for 30 min using nitrogen gas (N₂), followed by activation with steam at different flow rates (2.0, 3.0, and 4.0 ml/min), temperatures (600, 750, and 900°C) and times (15, 30, and 45 min). The AC sample produced at an activation temperature of 900°C with a steam flow rate of 2.0 ml/min and activation time of 15 min was selected as the best adsorbent with a total yield of 21.7%. It had adsorbed more than 97% of total cadmium from aqueous solution within 2 min of the contact time. Characterization of EFBF-based AC by SEM and BET surface area analysis had shown a good-quality adsorbent with highly active sites and well-developed pores with BET surface area of 635.16 m²/g. Experimental results indicated that the prepared AC from EFBF provide a promising solution in water and wastewater treatment.     

Ecotoxicological assessment of metalworking fluids using the Allium cepa test procedure

Metalworking fluids (MWFs), which have a long history of use in industry and are in constant and ever-increasing use in parallel with advancements in mechanisation, are emulsions prepared with water. MWFs prepared as a 1/20 (MWF: water) mixture in practice, contain a large amount of water within their structure, and may become an aquatic toxic mixture in an ecosystem. In this study, half maximal effective concentration (EC₅₀) values for MWFs were determined using the Allium cepa test, an accepted ecotoxicological biomonitor, and test solutions were prepared (1/250, 1/500 and 1/1000). Depending on the MWF ratio at each concentration, a decrease in the mitotic index (MI), irregularities in the phase distribution and aberrations in the chromosomes were observed. When the amount of MWF in the water increased, chromosomal abnormalities such as stickiness were observed to occur; whereas abnormalities such as c-mitosis, fragments, bridges, vagrants and micronucleus increased as the amount of the MWF decreased. Over a second 24-h period, it was observed that values, in particular MI, showed a tendency to return to normal.     

Activated carbons derived from oil palm empty-fruit bunches： Application to environmental problems

Activated carbons derived from oil palm empty fruit bunches （EFB） were investigated to find the suitability of its application for removal of phenol in aqueous solution through adsorption process, Two types of activation namely; thermal activation at 300, 500 and 800℃and physical activation at 150℃ （boiling treatment） were used for the production of the activated carbons. A control （untreated EFB） was used to compare the adsorption capacity of the activated carbons produced from these processes. The results indicated that the activated carbon derived at the temperature of 800℃ showed maximum absorption capacity in the aqueous solution of phenol. Batch adsorption studies showed an equilibrium time of 6 h for the activated carbon at 800℃. It was observed that the adsorption capacity was higher at lower values of pH （2-3） and higher value of initial concentration of phenol （200-300 mg/L）. The equilibrium data fitted better with the Freundlich adsorption isotherm compared to the Langmuir. Kinetic studies of phenol adsorption onto activated carbons were also studied to evaluate the adsorption rate. The estimated cost for production of activated carbon from EFB was shown in lower price （USD 0.50/kg of activated carbon） compared the activated carbon from other sources and processes.     

Attenuation of sodium arsenite-induced cardiotoxicity and neurotoxicity with the antioxidant,anti-inflammatory,and antiapoptotic effects of hesperidin

Environmental Science and Pollution Research - In the scope of the study, the protective effect of hesperidin (HES), a flavanone glycoside, was investigated against sodium arsenite (NaAsO2, SA)...