Distribution of nuclear bomb Pu in Nishiyama area, Nagasaki, estimated by accurate and precise determination of 240Pu/239Pu ratio in soils

Plutonium isotopes in forest soils collected in Nishiyama area, Nagasaki, were successfully determined by high resolution inductively coupled plasma mass spectrometry after the treatment with a microwave decomposition system. The (240)Pu/(239)Pu atom ratios observed in the samples in the Nishiyama area were obviously lower than the range of the global fallout. The low ratios (minimum 0.032) observed in Nishiyama area indicated the influence of detonation of the Pu nuclear weapon in 1945. Since the area is contaminated also by global fallout, the (240)Pu/(239)Pu atom ratio can be more sensitive indicator of bomb-derived Pu than Pu activity concentration.     

Optimization of compost fermentation of glycerol by-product discharged from biodiesel fuel production process

Development of a cheap system for reuse of glycerol by-product discharged from the biodiesel fuel (BDF) production process is needed in parallel with development of a low-cost BDF production system. In this article, optimization of compost fermentation of glycerol by-product was studied. The type and amount of additive nitrogen source was studied, and good utilization of glycerol was observed when 0.5 g of urea was added to a mixture of 625 g dry sawdust, 25 g of microbial seed, and 50 g of glycerol by-product. To achieve efficient compost fermentation, repeated batch fermentation was applied and five batch cultures were repeated. Although the pH level and nitrogen and water contents were maintained at suitable levels for microbial growth, the glycerol consumption rate gradually decreased with accumulation of oily compounds in the compost. Finally, a material cost evaluation of the compost fermentation proposed in this study was performed. The total material cost decreased to ￥0.57 /l of BDF when employing an existing compost system for the fermentation process, although sawdust used for mushroom cultivation was used in this study at the very high cost of ￥123 /kg dry sawdust. However, the cost of disposal of the glycerol byproduct as an industrial waste was ￥5.2 /l of BDF produced; therefore, there might be an economical advantage to compost fermentation of glycerol by-product from BDF production.     

Age-related settlement success by cyprids of the barnacleBalanus amphitrite,with special reference to consumption of cyprid storage protein

Newly molted (0-d-old) cyprids of the barnacleBalanus amphitrite Darwin were prevented from settling for 0 to 14 d at four different temperatures (25, 20, 15 and 5°C treatments). The effect on settlement success of prolonging the cyprid lifetime was evaluated using a nitrilocellulose membrane assay. In addition, protein extract prepared from these cyprids was analyzed using gel electrophoresis to characterize the effect of age on protein content and composition. Settlement success was significantly affected for larvae aged at 25 (P < 0.001), 20 (P < 0.001) and 15°C (P < 0.05), while differences in settlement success between age groups was negligible at 5°C (P = 0.09). Settlement success of cyprids increased with time for up to 3 d (P < 0.001, Phase 1), following which settlement success significantly declined (P < 0.001, Phase 11). Temperature had no significant effect on settlement in Phase I (P = 0.17), but did enhance the decline in settlement success with age during Phase II (P < 0.001). Gel electrophoresis revealed a significant decline in the quantity of the cyprid storage protein CMP (Cyprid Major Protein) with increasing age at 25, 20 and 15°C, but CMP levels remained constant at 5°C. These results suggest that, upon molting to the cyprid stage, larvae may still require a settlement-competence attainment period. This may be achieved by CMP utilization during Phase I, depletion of which during Phase II may be responsible for reduction in settlement success with cyprid age such that remaining CMP stores can no longer support the production of adult structures following settlement.     

Population genetic structures of the fissiparous seastar Coscinasterias acutispina in the Sea of Japan

The morphological characteristics and the population genetic structures of the fissiparous seastar Coscinasterias acutispina were investigated for eight sites in the Sea of Japan in order to clarify the presence of sexual and asexual reproduction. Morphological observation based on arm length showed that fission was common at all eight sites examined, indicating the likely production of clonal individuals. A random amplified polymorphic DNA (RAPD) marker was used to detect clones arising by fission and to assess gene flow among sites. A simulation approach using RAPD data revealed the presence of clonal individuals at almost all sites, suggesting the existence of asexual reproduction. The result of phylogenetic analysis according to RAPD genotype showed no relationship between genetic and geographic distances. Considering the limited movement ability of seastar species during the adult phase, these observations suggest the existence of marked gene flow among sites, due to dispersal of planktonic larvae produced by sexual reproduction. These observations suggest that multi-locus genotypic compositions depend on the relative amounts of recruitment from sexual and asexual reproduction in each population.     

Formation of PCDDs and PCDFs during the combustion of polyvinylidene chloride

In laboratory-scale combustion of polyvinylidene chloride (PVDC) with a quartz tubular furnace designed and fabricated to provide the desired combustion temperature and mixing state of combustion gas with air, it was found that at 800 degrees C or higher the level of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans [corrected] (PCDDs/PCDFs) resulting from PVDC combustion was no higher than that from heating air alone, and thus far below the levels which resulted from PVDC combustion at 750 degrees C or lower. The results provide the first laboratory confirmation of the relation between PVDC incineration temperature and PCDD/PCDF formation, and of the primary importance of high temperature, turbulence for mixing between air and combustion gas, and sufficient residence time, as governing factors for the minimization of PCDD/PCDF formation in municipal solid waste incinerators.     

De novo formation characteristics of dioxins in the dry zone of an iron ore sintering bed

The objectives of this work are to understand the details of the mechanism of dioxin formation in the part of a sintering bed termed the dry zone, and to obtain ideas on how to prevent their formation. Sinter mixtures of various composition types were heated in a packed bed reactor, and dioxins in the outlet gas and in the sinter mixture residue were measured. The dioxin formation potential of a simple sinter mixture composed of iron ore, coke and limestone was markedly lower than that of fly ash from a municipal solid waste incinerator (MSWI). In consideration of this result, a series of experiments were conducted using a sinter mixture impregnated with CuCl2. Experimental results showed that dioxin formation was temperature-dependent in the range of 300-550 degrees C, with the maximum observed at around 300 degrees C, which was quite similar to that of fly ash from the MSWI. The homologue distribution of PCDD/Fs in gas and solid reflected the possible difference in carbonaceous materials in coke and activated coke. Gaseous hydrogen chloride acted as a chlorinating reagent for dioxin formation.     

PIXE trace element analysis of an aquatic plant as indicator of heavy metal pollution

A new way of detecting trace elements in water is developed by using charged $\text{P}$article $\text{I}$nduced $\text{X}$-ray $\text{E}$mission (PIXE) analysis of cell walls of $\text{Chara corallina}$, a fresh water alga.     

Designing a purification process for chromium-, copper- and arsenic-contaminated wood

The disposal of chromated copper arsenate (CCA)-treated wood is becoming a serious problem in many countries due to increasing levels of contamination by the hazardous elements, chromium, copper and arsenic. The present experiment was conducted as a preliminary step toward one-step solvent extraction of CCA-treated wood. Because chromium, copper and arsenic have different chemical characteristics, it is best to consider them separately prior to designing a one-step extraction process. As a basis, various two-step extraction processes were first designed and tested experimentally to determine feasibility. Among these combinations, the treatment combining oxalic acid as the 1st step and a sodium oxalate solution under acidic conditions (pH 3.2) as the 2nd step was found to be an effective way of extracting CCA elements from treated wood. Extraction efficiency reached 100% for arsenic and chromium and 95.8% for copper after a 3-h sodium oxalate treatment, following a 1-h pre-extraction process with oxalic acid. On the other hand, the same combination under alkaline conditions (pH 11.2) during the 2nd step was ineffective for copper removal, indicating that pH plays an important role in complexation with sodium oxalate solution. The present results suggest that the extraction of CCA elements using a combination of oxalic acid and acidic sodium oxalate solution is a promising basis for application to a one-step extraction method.     

Carbonization of waste PVC to develop porous carbon material without further activation

Efficient removal of chlorine from PVC achieved by two-stage heat-treatment (280 and 410 degrees C) provided chlorine-free isotropic pitch containing additive. The pitch was stabilized and carbonized into porous carbons with surface areas of approximately 300 m2/g. Resultant porous carbons showed three pore structures of supermicropore, micropore and mesopore. The generation of CO2 from the decomposition of the CaCO3 additive in waste PVC is responsible for the development of porous structures. The surface area of the carbonized product increased after the removal of CaO.     

A possible hybrid zone in the Mytilus edulis complex in Japan revealed by PCR markers

The adhesive protein allele of mussels collected at 13 points in Japan from Hokkaido to Kyushu was analyzed by the polymerase chain reaction using a set of primers which amplifies a part of the nonrepetitive region of the adhesive protein gene. While most mussels exhibited a 126 bp fragment, characteristic of the pure Mytilus galloprovincialis, 55 of 64 mussels sampled at Hiura and 1 of 14 mussels at Hakodate Port exhibited 168 and 126 bp fragments. Sequence analysis of the two fragments indicated that the 168 and 126 bp fragments are almost identical to previously reported sequences in M. trossulus and M. galloprovincialis, respectively. Since the frequency of heterozygous individuals in Hiura is very high, it is unlikely that they are simple hybrids. However, it is evident that mixing of genes occurred between the two species off Hokkaido. Received: 6 September 1996 / Accepted: 9 October 1996