Does ICT lessen CO2 emissions for fast-emerging economies? An application of the heterogeneous panel estimations

Environmental Science and Pollution Research - This study examines the effects of electricity consumption, financial development, economic growth, trade and ICT on CO2 emissions in the...     

Evaluation of heavy metal content in digestate from batch anaerobic co-digestion of sunflower hulls and poultry manure

In this experimental study, the biogas digestate from mesophilic batch anaerobic co-digestion of poultry manure and an agricultural residue, sunflower hulls, was characterized, particularly in terms of heavy metal content, in order to evaluate whether the biogas digestate was suitable for land applications. Ni, Zn, Cu, Pb, Cr, Cd, and Hg were detected in the biogas digestate in each trial, however, their concentrations were always lower than the limit values stated in Turkish regulations. The main source of heavy metals in the biogas digestate seemed to be the poultry manure, not the agricultural residue. The commercial feedstuffs that are frequently supplemented with various essential elements to promote optimum nutrient supply and optimum growth rates may have contributed to heavy metals presence in the biogas digestate. The results indicated that the biogas digestate from anaerobic co-digestion of manure and agricultural residue could be utilized as fertilizer in agricultural applications.     

Impact of overland traffic on heavy metal levels in highway dust and soils of Istanbul, Turkey

The purpose of this study was to investigate the impact of overland traffic on the spatial distribution of heavy metals in urban soils (Istanbul, Turkey). Road dust, surface, and subsurface soil samples were collected from a total of 41 locations along highways with dense traffic and secondary roads with lower traffic and analyzed for lead (Pb), zinc (Zn), and copper (Cu) concentrations. Statistical evaluation of the heavy metal concentrations observed along highways and along the secondary roads showed that the data were bimodally distributed. The maximum observed Pb, Zn, and Cu concentrations were 1,573, 522 and 136 mg/kg, respectively, in surface soils along highways and 99.3, 156, and 38.1 mg/kg along secondary roads. Correlation analysis of the metal concentrations in road dust, surface and 20-cm depth soils suggests the presence of a common pollution source. However, metal concentrations in the deeper soils were substantially lower than those observed at the surface, indicating low mobility of heavy metals, especially for Pb and Zn. A modified kriging approach that honors the bimodality of the data was used to estimate the spatial distribution of the surface concentrations of metals, and to identify hotspots. Results indicate that despite the presence of some industrial zones within the study area, traffic is the main heavy metal pollution source.     

The contamination with organochlorine pesticides and heavy metals in surface water in Küçük Menderes River in Turkey, 2000-2002

This study was conducted from 2000 to 2002 to determine the residues of organochlorine pesticides (OCP) and metals in surface water of Kü?ük Menderes River in Turkey. The results showed that Kü?ük Menderes River was still polluted with organochlorine pesticide despite the existence of bans over a long time. The concentrations of pesticides depended on the sampling season and the tendency was not the same for all detected pesticides. The DDTs (DDT, DDD, DDE) were detected in most water samples. DDD showed a high concentration among DDTs. The highest concentration among organochlorine pesticides was heptachlor epoxide by 281 ng/l. However, the residues were lower than most polluted water from other sources in the world. In most cases, they were not detectable. The studied surface water metals varied from not detected to 0.258 mg/l, and the residues were low except for Ni, Cu, and Zn.     

The effect of EDTA and citric acid on phytoremediation of Cd, Cr, and Ni from soil using Helianthus annuus

The possibility to clean heavy metal contaminated soils with hyperaccumulator plants has shown great potential. One of the most recently studied species used in phytoremediation applications are sunflowers. In this study, two cultivars of Helianthus annuus were used in conjunction with ethylene diamine tetracetic acid (EDTA) and citric acid (CA) as chelators. Two different concentrations of the chelators were studied for enhancing the uptake and translocation of Cd, Cr, and Ni from a silty-clay loam soil. When 1.0 g/kg CA was used, the highest total metal uptake was only 0.65 mg. Increasing the CA concentration posed a severe phytotoxicity to both cultivars as evidenced by stunted growth and diminished uptake rates. Decreasing the CA concentration to 0.1 and 0.3 g/kg yielded results that were not statistically different from the control. EDTA at a concentration of 0.1 g/kg yielded the best results for both cultivars achieving a total metal uptake of approximately 0.73 mg compared to approximately 0.40 mg when EDTA was present at 0.3 g/kg.     

The effect of EDTA on Helianthus annuus uptake, selectivity, and translocation of heavy metals when grown in Ohio, New Mexico and Colombia soils

The use of two EDTA concentrations for enhancing the bioavailability of cadmium, chromium, and nickel in three natural soils (Ohio, New Mexico and Colombia) was investigated. The resulting uptake, translocation and selectivity with Helianthus annuus after mobilization were also examined. In general, plants grown in the sandy-loam Ohio soil had a higher uptake that resulted in a selectivity and total metal content of Cd>Cr>Ni and 0.73 mg and Cr>Cd>Ni and 0.32 mg for 0.1 and 0.3 g kg-1 EDTA, respectively. With the silty-loam New Mexico soil, although the total metal uptake was not statistically different the EDTA level did alter the selectivity; Cd>Cr>Ni (0.1 g kg-1 EDTA) and Cd>Cr>Ni (0.3 g kg-1 EDTA). Conversely, with the Colombian (sandy clay loam) soil increasing the EDTA level resulted in a higher total metal uptake (0.62 mg) than the 0.1 g kg-1 (0.59 mg) treatment. For all three soils, the translocation of Cd was limited. Evaluating the mobile metal fraction with and without EDTA determined that the chelator was capable of overcoming mass transfer limitations associated with the expandable clay fraction in the soils. Root wash results and root biomass concentrations indicated that Cd sorption was occurring. Therefore limited Cd translocation was attributed to insufficient phytochelatin levels.     

Evaluation of pesticide residues in fruits and vegetables from the Aegean region of Turkey and assessment of risk to consumers

Environmental Science and Pollution Research - Pesticides may cause a potential risk to human health when applied in excess to control pests, diseases, and weeds in crop fields. In the current...     

Determination of biogas generation potential as a renewable energy source from supermarket wastes

Fruit, vegetable, flower waste (FVFW), dairy products waste (DPW), meat waste (MW) and sugar waste (SW) obtained from a supermarket chain were anaerobically digested, in order to recover methane as a source of renewable energy. Batch mesophilic anaerobic reactors were run at total solids (TS) ratios of 5%, 8% and 10%. The highest methane yield of 0.44 L CH₄/g VS_added was obtained from anaerobic digestion of wastes (FVFW + DPW + MW + SW) at 10% TS, with 66.4% of methane (CH₄) composition in biogas. Anaerobic digestion of mixed wastes at 5% and 8% TS provided slightly lower methane yields of 0.41 and 0.40 L CH₄/g VS_added, respectively. When the wastes were digested alone without co-substrate addition, the highest methane yield of 0.40 L CH₄/g VS_added was obtained from FVFW at 5% TS. Generally, although the volatile solids (VS) conversion percentages seemed low during the experiments, higher methane yields could be obtained from anaerobic digestion of supermarket wastes. A suitable carbon/nitrogen (C/N) ratio, proper adjustment of the buffering capacity and the addition of essential trace nutrients (such as Ni) could improve VS conversion and biogas production yields significantly.     

Determination of optimal water solubility of capsaicin for its usage as a non-toxic antifoulant

BACKGROUND: Capsaicin, a non-toxic natural product antifoulant, is an attractive alternative to the currently used toxic metal-based antifoulants for protecting the submerged surfaces. The problem associated with conducting capsaicin experiments is its limited aqueous solubility. METHODS: A procedure was developed to obtain the maximum capsaicin concentration in water. Capsaicin was first dissolved in one of the three organic solvents, methanol, ethanol, and acetone. The organic solvent was replaced by gradually adding distilled water and evaporating the organic solvent. RESULTS: The best solvent for obtaining highest concentration of capsaicin in water was ethanol. A maximum capsaicin in water 6400 ppm was achieved by using 16 mg capsaicin dissolved in 0.8 ml ethanol followed with the addition of 2.5 ml distilled water in 0.2 ml increments and then slow evaporation of the solvent. CONCLUSION: The concentration obtained using our approach is well above the threshold concentration of capsaicin in deterring the marine organism attachments.     

Persistence and behavior of pesticides in cotton production in Turkish soils

Turkey is the sixth largest producer of cotton in the world. Two of the most commonly applied pesticides used in cotton production are trifluralin and endosulfan. Although both are very effective at controlling pests, their persistence in the environment poses risks to human health and the environment. Four loam soils and one silty-loam soil were studied to evaluate the persistence of trifluralin and endosulfan in relation to soil characteristics. Degradation with trifluralin reached as high as 70% of the applied doses. Soils with the highest organic matter content had the lowest degradation rate, indicating a tighter sorption of trifluralin. Endosulfan degradation was a function of soil type and the specific isomer, with β-endosulfan depicting the highest degradation.