Effectiveness of autoencoder for lake area extraction from high-resolution RGB imagery: an experimental study

Environmental Science and Pollution Research - The surface areas of lakes alter constantly due to many factors such as climate change, land use policies, and human interventions, and their surface...     

Assessment of environmental radioactivity for Batman, Turkey

The province of Batman, located in southern Anatolia, has a population of approximately 500,000. To our knowledge, there exists no information regarding the environmental radioactivity in this province. Therefore, gamma activity measurements in soil, building materials and water samples and an indoor radon survey have been carried out in the Batman province. The mean activity concentrations of the natural radionuclides (²²⁶Ra, ²³²Th and ⁴⁰K) and a fission product (¹³⁷Cs) were 35 ± 8, 25 ± 10, 274 ± 167 and 12 ± 7 Bq kg^???1, respectively, in the soil samples. The concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K in the selected building materials ranged from 18 to 48 Bq kg^???1, 8 to 49 Bq kg^???1 and 68 to 477 Bq kg^???1, respectively. All the calculated radium equivalent (Ra_eq) activity values of the building material samples are lower than the limit of 370 Bq kg^???1, equivalent to a γ-dose of 1.5 mSv year^???1. The activity concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K in tap waters collected from the study area were determined with mean specific activity concentrations of 42 ± 15, 35 ± 9 and 524 ± 190 mBq L^???1, respectively. Indoor radon measurements were made at 95 dwellings in Batman using a CR-39 detector. The radon concentration levels were found to vary from 23 to 145 Bq m^???3. The arithmetic mean of the measured radon concentration levels was found to be 84 Bq m^???3 with a standard deviation value of 23 Bq m^???3. The measurement results obtained in this study did not significantly differ from those taken in other parts of the country. The data generated in this study can be used to determine whether the Batman province is in a normal or high background radiation area and provides a valuable database for future estimations of the impact of radioactive pollution.     

How green are the chemicals used as liquid fuels in direct liquid-feed fuel cells?

How green are the chemicals used as liquid fuels in the direct liquid-feed fuel cells intended to mobile, portable applications? Is there any risk of using such fuels? The present paper tries to give indications of answer to these questions while tackling the green chemistry concept, the liquid fuels (i.e. anodic oxidation, inherent hazards and renewability), the reaction products and by-products. The discussion especially focuses on green chemists' critical remarks and the green chemistry principles. Globally none of the liquid fuels appears to be green in terms of toxicity even if most could be produced from renewable raw materials. However this does not necessarily mean that the direct liquid-feed fuel cell technology is not green. The greenness of the direct liquid-feed fuel cell will also depend on its reliability and safety.     

Determination of cobalt,nickel and iron at trace level in natural water samples by in-column chelation-reversed phase high-performance liquid chromatography

This paper reports the utilization of 4-(2-pyridylazo) resorcinol (PAR) as a chelating reagent for in-column derivatization and the determination of trace Co, Fe, and Ni ions by reversed-phase high-performance liquid chromatography with photodiode array detector. A good separation of Co, Fe, and Ni chelates were achieved by using an Inertsil ODS-3 column and a mobile phase, consisted of methanol–THF–water mixture (50:5:45) containing ammonium acetate buffer (pH 5.0) and PAR. After full optimization, good repeatability of retention times (relative standard deviation (RSD) < 0.05%) and peak areas (RSD < 1.7%) was achieved as well as a good linearity (r ² > 0.9991). The detection limits (S/N = 3), expressed as micrograms per liter, were 0.50 (Co), 9.07 (Fe), and 2.00 (Ni). The applicability and the accuracy of the developed method were estimated by the analysis of spiked water samples and certified reference material BCR 715 wastewater-SRM.     

Utilization of waste tire rubber in manufacture of oriented strandboard

Some physical and mechanical properties of oriented strandboards (OSBs) containing waste tire rubber at various addition levels based on the oven-dry strand weight, using the same method as that used in the manufacture of OSB. Two resin types, phenol–formaldehyde (PF) and polyisocyanate, were used in the experiments. The manufacturing parameters were: a specific gravity of 0.65 and waste tire rubber content (10/90, 20/80 and 30/70 by wt.% of waste tire rubber/wood strand). Average internal bond values of PF-bonded OSB panels with rubber chips were between 17.6% and 48.5% lower than the average of the control samples while polyisocyanate bonded OSBs were 16.5–50.6%. However, water resistance and mechanical properties of OSBs made using polyisocyanate resin were found to comply with general-purpose OSB minimum property requirements of EN 300 Type 1 (1997) values for use in dry conditions at the lowest tire rubber loading level (10%) based on the oven-dry panel weight. The tire rubber improved water resistance of the OSB panel due to its almost hydrophobic property. Based on the findings obtained from this study, we concluded that waste tire rubber could be used for general-purpose OSB manufacturing up to 10% ratio based on the oven-dry panel weight.     

Determination of total chromium by flame atomic absorption spectrometry after coprecipitation by cerium (IV) hydroxide

A method for the preconcentration of the total chromium based on coprecipitation with cerium (IV) hydroxide is proposed for determination of chromium by flame atomic absorption spectrometry. Different factors including carrier element amount, pH, sample volume and matrix ion effects for the precipitation were examined. The detection limit of the total chromium (k = 3, N = 15) was 0.18 μg l⁻¹. The presented method was applied for the determination of chromium in the wastewater samples from Kayseri and Nigde Organized Industrial Region-Turkey and in drinking water from our laboratory, Kayseri with satisfactory results (relative standard deviations below 8%, recoveries 95%). The analytical results obtained by the proposed method for certified copper sample was in good agreement with the certified value.     

Prenatal diagnosis of multiple pterygium syndrome associated with Klinefelter syndrome

A nonlethal form of multiple pterygium syndrome (MPS) was diagnosed prenatally at 16 weeks of gestation with associated Klinefelter syndrome in the same fetus. The ultrasound findings were cystic hygroma, hypertelorism, micrognathia, low-set ears, flexion contractures of upper and lower extremities and rocker-bottom foot. Genetic amniocentesis revealed a 47,XXY karyotype. After genetic counseling, the parents decided to have a therapeutic abortion. We presented this case for the purpose of further describing the early ultrasound findings and clinical features of multiple pterygium syndromes. Also, what makes our patient unique is the coincidental presence of Klinefelter syndrome with MPS. To our knowledge, this is the first case in the literature in which a 47,XXY karyotype has been found in a fetus with multiple pterygium syndrome. The importance of delineating the exact subtype of MPS and making a precise differential diagnosis becomes critical during the process of evaluation of patients with MPS. Copyright © 2003 John Wiley & Sons, Ltd.     

Surface Ozone Concentrations and its Relation to Wind Field in Istanbul

In this study, an assessment has been made on the wind speed; temperature and atmospheric pressure were analyzed by considering meteorological variables for selected high ozone cases. The Systems Applications International Meso-scale Model (SAIMM), a prognostic meteorological model was used to develop the 3-dimensional meteorological inputs to a chemical model. Meteorological conditions favorable for high ozone concentrations appear when Istanbul and the surrounding region is dominated by an anticyclonic pressure system. During the ozone favorabledays, south and southwesterly winds with low wind speed influence Istanbul. We presented wind field simulations for a case study in explaining the ozone formation mechanism over Istanbul.     

Retesting the EKC hypothesis through transmission of the ARMEY curve model: an alternative composite model approach with theory and policy implications for NAFTA countries

Environmental Science and Pollution Research - We investigate the validity of the environmental Kuznets curve (EKC) hypothesis for the NAFTA countries. In this investigation, we approach this...