Effect of land use changes on non-carcinogenic health risks due to nitrate exposure to drinking groundwater

Environmental Science and Pollution Research - This study aimed to determine the effect of land-use changes on the non-carcinogenic health risk of nitrate ion exposure of underground drinking water...     

Application of magnetic field and iron in order to change medicinal products of <Emphasis Type="Italic">Ocimum basilicum</Emphasis>

In the present research, the effects of static magnetic field, with or without iron on the growth, the activity of certain enzymes (like polyphenol oxidase and phenyle alanine ammonialyase), the content of phenolic compounds and the essential oil composition of sweet basil (Ocimum basilicum) were studied. Treatment of plants with static magnetic field with or without iron led to decrease of the growth of plants as well as decrease in the activity of phenyle alanine ammonialyase and of phenolic compounds content. In addition in those plants exposed to magnetic field the amount of essential oils, notably of methyl chavicol, was increased. Exposure of plants to the magnetic field decreased the activity of polyphenol oxidase, whereas treatment of plants with iron when exposed to magnetic field increased polyphenol oxidase activity. In this group the content of essential oil was reduced.     

Factors affecting use and nonuse of child safety car seats in Gorgan,Iran

Objective: Motor vehicle accidents, which are among the main causes of child mortality in Iran and the Middle East, impose staggering costs for the community. Ignoring use of safety devices for children in most motor vehicle crashes will lead to death or serious injury. Because few studies have been performed on effective and predictive factors regarding use of child safety seats, the purpose of this study was to examine the factors affecting the use and nonuse of child safety seats, along with the factors that can facilitate how a child safety seat is used.

Method: This study was conducted in the urban area of Gorgan using a questionnaire. Through random selection, 204 parents with at least one child, aged 8?years or younger, reported their knowledge about the benefits of using a child safety seat.

Results: The results showed that 80% of parents never use a child safety seat, and 13% always use a child safety seat. More than 93% thought that it was necessary to make usage of the child safety seat obligatory. In addition, 80% of parents believed that a child safety seat prevents children from injury in crashes. In addition, 38% of parents were not aware of child safety devices and child safety, less than 20% said that they did not use a child safety seat because their spouse did not support its use, and 28% of them thought that a child safety seat does not affect the safety of the child. In general, 91% of parents reported that if child safety seat use were mandated, the frequency of use would increase. A law on the use of child safety seats is a very important variable in their use, which can enhance the chance of using a child safety seat by 6.5 times.

Conclusion: Special instructions should be developed to create incentive strategies for using a child safety seat. Mandating the use of a child safety seat, equipping cars with a child safety seat, encouraging children to use it, and providing continuous education and training are important factors for increasing the use of child safety seats.     

Two-site kinetic modeling of bacteriophages transport through columns of saturated dune sand

Breakthrough curves, on a semi-log scale, from tests in porous media with block-input of viruses, bacteria, protozoa and colloidal particles often exhibit a typical skewness: a rather slowly rising limb and a smooth transition of a declining limb to a very long tail. One-site kinetic models fail to fit the rising and declining limbs together with the tail satisfactorily. Inclusion of an equilibrium adsorption site does not seem to improve simulation results. This was encountered in the simulation of breakthrough curves from a recent field study on the removal of bacteriophages MS2 and PRD1 by passage through dune sand. In the present study, results of laboratory experiments for the study of this issue are presented. Breakthrough curves of salt and bacteriophages MS2, PRDI, and phiX174 in 1 D column experiments have been measured. One- and two-site kinetic models have been applied to fit and predict breakthrough curves from column experiments. The two-site model fitted all breakthrough curves very satisfactorily, accounting for the skewness of the rising limb as well as for the smooth transition of the declining limb to the tail of the breakthrough curve. The one-site model does not follow the curvature of the breakthrough tail, leading to an overestimation of the inactivation rate coefficient for attached viruses. Interaction with kinetic site 1 is characterized by relatively fast attachment and slow detachment, whereas attachment to and detachment from kinetic site 2 is fast. Inactivation of viruses and interaction with kinetic site 2 provide only a minor contribution to removal. Virus removal is mainly determined by the attachment to site 1. Bacteriophage phiX174 attached more than MS2 and PRD1, which can be explained by the greater electrostatic repulsion that MS2 and PRD1 experience compared to the less negatively charged phiX174.     

Using Design-Expert to Optimize the Properties of a Polyethersulfone Ultrafiltration Membrane Through the Incorporation of NH2-MIL-53(Fe) and PVP for Maximum Cr(VI) Removal and Flux

Journal of Polymers and the Environment - In this study, an NH2-MIL-53(Fe) functionalized membrane was fabricated for Cr(VI) removal from contaminated groundwater. Design-Expert was employed to...     

Tropospheric Ozone in Tehran,Iran, during the last 20 years

Environmental Geochemistry and Health - Air pollution and its effects on human health and the environment are one of the main concerns in urban areas. This study focuses on the distribution and...     

Temporal variation in leachate composition of a newly constructed landfill site in Lahore in context to environmental pollution and risks

Environmental Science and Pollution Research - This study investigated the seasonal and temporal variations in the extent and source of physiochemical and toxic trace elements in the Lakhodair...     

The detection of SARS-CoV-2 RNA in indoor air of dental clinics during the COVID-19 pandemic

Environmental Science and Pollution Research - In the indoor environment of dental clinics, dental personnel and patients are exposed to a risk of infection because of the transmission of...     

Interactive Influence of Biofiber Composition and Elastomer on Physico-Mechanical Properties of PLA Green Composites

The objective of this work was to improve the impact and thermal properties of polylactic acid (PLA)-based biocomposite by appropriate application of cellulosic fiber and a bioelastomer. Biocomposites formulations with fiber contents of up to 20% in combination with a bioelastomer were extrusion-compounded in a twin-screw extruder followed by molding in an injection molding system. Fibers used in the formulations included three types of cellulosic fiber; namely, raw fiber from oat hull biomass (RF), hydrolysis byproduct (ATF) which was the solid fraction obtained from an acid-catalyzed hydrolysis of RF, and delignified fibers (AD30, AD65, AD100) which were the products of delignification of ATF. Formulated biocomposites were characterized for thermal (glass transition and melting temperatures, and enthalpy of melting) and physico-mechanical (tensile and bending strengths, stiffness, impact energy, and water absorption) properties. Among all types of biofibers, RF resulted in poor properties in the biocomposites due to the high hemicellulose content in the structure. On the other hand, the ratio of lignin to cellulose (in the absence of hemicellulose) in the modified fibers did not significantly affect the physico-mechanical and thermal properties of the biocomposites. The elastomer applied in the formulations improved the impact energy, thermal properties, and elongation at break of the composites. However, it adversely affected the strength and water resistance of biocomposites, especially in the presence of hemicellulose. The results indicated that, depending on the application, a wide range of PLA green composites with different physico-mechanical properties can be achieved.