Improved desalination by polyamide membranes containing hydrophilic glutamine and glycine

Environmental Chemistry Letters - Water desalination and recycling of wastewater is a key challenge to meet water shortage issues. Thin film composite polyamide membranes are widely used for...     

Fungicidal values of bio-oils and their lignin-rich fractions obtained from wood/bark fast pyrolysis

Pine wood, pine bark, oak wood and oak bark were pyrolyzed in an auger reactor. A total of 16 bio-oils or pyrolytic oils were generated at different temperatures and residence times. Two additional pine bio-oils were produced at the National Renewable Energy Laboratory in a fluidized-bed reactor at different temperatures. All these bio-oils were fractionated to obtain lignin-rich fractions which consist mainly of phenols and neutrals. The pyrolytic lignin-rich fractions were obtained by liquid-liquid extraction. Whole bio-oils and their lignin-rich fractions were studied as potential environmentally benign wood preservatives to replace metal-based CCA and copper systems that have raised environmental concerns. Each bio-oil and several lignin-rich fractions were tested for antifungal properties. Soil block tests were conducted using one brown-rot fungus (Gloeophyllum trabeum) and one white-rot fungus (Trametes versicolor). The lignin-rich fractions showed greater fungal inhibition than whole bio-oils for a impregnation solution 10% concentration level. Water repellence tests were also performed to study wood wafer swelling behavior before and after bio-oil and lignin-rich fraction treatments. In this case, bio-oil fractions did not exhibit higher water repellency than whole bio-oils. Comparison of raw bio-oils in soil block tests, with unleached wafers, at 10% and 25% bio-oil impregnation solution concentration levels showed excellent wood preservation properties at the 25% level. The good performance of raw bio-oils at higher loading levels suggests that fractionation to generate lignin-rich fractions is unnecessary. At this more effective 25% loading level in general, the raw bio-oils performed similarly. Prevention of leaching is critically important for both raw bio-oils and their fractions to provide decay resistance. Initial tests of a polymerization chemical to prevent leaching showed some success.     

An Analysis of the Annual and Seasonal Trends of Air Quality Index of Delhi

The Air Quality Index (AQI) is an index for reporting daily air quality. A study on the annual and seasonal variations of Air Quality Index over a period of 9 years (1996-2004) based on daily averaged concentration data of criteria air pollutants has been conducted for Delhi. An attempt has been made to quantify the changes in the AQI on annual and seasonal (winter, summer, monsoon and post monsoon) basis for 9 years. Measurements for the seven monitoring sites (Nizamuddin, Ashok Vihar, Shahzada Baug, Shahadara, Janakpuri, Sirifort and ITO) in Delhi were analysed and trends were also compared amongst these sites. Maximum Operator Function method was used to compute the Air Quality Index of the above areas and percentage variations in different severity class is discussed which provides in depth analysis of the trends. The best air quality was depicted by Shahzada Baug followed by Shahdara, both of these were classified as industrial areas indicating that policy measures relating to the industries in the city during past years have helped in improving the air quality. The air quality in other areas have improved slightly in the span of nine years but still remains critical indicating continued rigorous efforts in this direction. Increased traffic density seems to have resulted into the worst air quality at ITO in the city amongst all the monitoring stations. There is a shift for the worst AQI in the city from winter to summer season in a time span of these nine years. Change of season for worst AQI from Winter to Summer may also be likely due to increased photochemical reactions playing major role with change in the nature of emissions imposed due to different control measures such as CNG implementation, significant shift to LPG in domestic sector etc. calling for a detailed study, those which started after the year 2000. After the year 2000, there is a significant increase in the Nitrogen-dioxide (NO(2)) concentration at all stations. ITO which has shown continuous exponential increase in pollution levels has first time showed a declining AQI trend in the year 2004 and one of the contributing factors could have been the Delhi metro (initiated in 2002) passing through congested neighbouring areas causing traffic decongestion here. In general, the areas which are farthest from metro route viz., Siri-fort, Nizamuddin, Janakpuri etc. did not record declining AQI in 2003 onwards as happened with stations closer to Metro route such as Ashok Vihar and ITO. An attempt has been made to quantify the reasons that lead to the changes in the values of the AQI.     

Heavy metals in the SPM of air in the environment surrounding a ferro-alloy industrial plant in India

Prices for ferro-alloys have hardened due to the closure of plants in developed countries on account of increasingly stringent pollution control legislation, resulting in a higher cost of production. A ferro-alloy industry with a capacity of 80000 MT per annum was selected to study the nature of pollution. Because of the objectionable nature of polluting air in and around the plant it was located in a rural area where there was no other industry. The area was agriculturally active and there was no effective control system for this plant.The quality of ambient air around the plant site is discussed in this paper along with the meteorological conditions. The maximum concentration of suspended particulate matter (SPM) was 768 µg/NM³ downwind of the plant, minimum 184 µg/NM³, and the average was more than 446 µg/NM³. The presence of heavy metals, viz. Fe, Mn, Cr and Pb, was also assessed. The concentration of Fe was 50 µg/NM³ downwind and 10 µg/NM³ upwind. The concentration of other metals followed a similar trend.     

Scale,context, and decision making in agricultural adaptation to climate variability and change

This work presents a framework for viewing agricultural adaptation, emphasizing the multiple spatial and temporal scales on which individuals and institutions process information on changes in their environment. The framework is offered as a means to gain perspective on the role of climate variability and change in agricultural adaptation, and developed for a case study of Australian agriculture. To study adaptation issues at the scale of individual farms we developed a simple modelling framework. The model highlights the decision making element of adaptation in light of uncertainty, and underscores the importance of decision information related to climate variability. Model results show that the assumption of perfect information for farmers systematically overpredicts adaptive performance. The results also suggest that farmers who make tactical planting decisions on the basis of historical climate information are outperformed by those who use even moderately successful seasonal forecast information. Analysis at continental scales highlights the prominent role of the decline in economic operating conditions on Australian agriculture. Examples from segments of the agricultural industry in Australia are given to illustrate the importance of appropriate scale attribution in adapting to environmental changes. In particular, adaptations oriented toward short time scale changes in the farming environment (droughts, market fluctuations) can be limited in their efficacy by constraints imposed by broad changes in the soil/water base and economic environment occuring over longer time scales. The case study also makes the point that adaptation must be defined in reference to some goal, which is ultimately a social and political exercise. Overall, this study highlights the importance of allowing more complexity (limited information, risk aversion, cross-scale interactions, mis-attribution of cause and effect, background context, identification of goals) in representing adaptation processes in climate change studies.     

Design parameters for fixed bed reactors of activated carbon developed from fertilizer waste for the removal of some heavy metal ions

Activated carbon, developed from fertilizer waste, has been used for the removal of Hg²⁺, Cr⁶⁺, Pb²⁺, and Cu²⁺. Mass transfer kinetic approach has been successfully applied for the determination of various parameters necessary for designing a fixed-bed absorber. Parameters selected are the length of the (PAZ) primary adsorption zone (δ), total time involved for the establishment of primary adsorption zone (t_x), mass rate of flow to the absorber (F_m), time for primary adsorption zone to move down its length (t_δ), amount of adsorbate adsorbed in PAZ from breakpoint to exhaustion (M_s), fractional capacity (f), time of initial formation of PAZ (t_f) and per cent saturation of column at break point. Chemical regeneration has been achieved with 1 M HNO₃.     

Insights into aqueous carbofuran removal by modified and non-modified rice husk biochars

Biochar has been considered as a potential sorbent for removal of frequently detected pesticides in water. In the present study, modified and non-modified rice husk biochars were used for aqueous carbofuran removal. Rice husk biochars were produced at 300, 500, and 700 °C in slow pyrolysis and further exposed to steam activation. Biochars were physicochemically characterized using proximate, ultimate, FTIR methods and used to examine equilibrium and dynamic adsorption of carbofuran. Increasing pyrolysis temperature led to a decrease of biochar yield and increase of porosity, surface area, and adsorption capacities which were further enhanced by steam activation. Carbofuran adsorption was pH-dependant, and the maximum (161 mg g^?1) occurred in the vicinity of pH 5, on steam-activated biochar produced at 700 °C. Freundlich model best fitted the sorption equilibrium data. Both chemisorption and physisorption interactions on heterogeneous adsorbent surface may involve in carbofuran adsorption. Langmuir kinetics could be applied to describe carbofuran adsorption in a fixed bed. A higher carbofuran volume was treated in a column bed by a steam-activated biochar versus non-activated biochars. Overall, steam-activated rice husk biochar can be highlighted as a promising low-cost sustainable material for aqueous carbofuran removal.     

Environmental forensic investigation of the air pollution from a cement manufacturing unit

Abstract

Cement manufacturing is a process that results in the emission of significant quantities of suspended particulate matter (SPM) to the ambient air. An environmental forensic investigation was carried out in the surroundings of a major cement manufacturing unit at a place called Coimbatore in the southern Indian state of Tamil Nadu. The investigation was carried out to identify the contribution of the cement manufacturing unit to the SPM concentration of the surrounding air environment. The sampling points’ selection and sample collection were done following the principles outlined in the INTERPOL Manual for Pollution Crime Forensic Investigation. On-site monitoring of the air samples was carried out using Mini Laser Aerosol Spectrometer (GRIMM, Mini-LAS Model 11R). The instrument was capable of measuring particles ranging from 0.25 to 32 µm and classifying them into 31 size channels. The test results at majority of the monitoring locations were well above the limits specified in the National Ambient Air Quality Standards of India. Microscopic studies of the dust samples were carried out for surface texture and particle shape. The spatial distribution of particles was analysed using geographic information system (GIS) for the visual identification of the extent of the pollution by keeping the cement factory as the focal point. The results from the GIS and microscopic analysis established the role of the cement factory in the particulate matter pollution of its surroundings, specifically in the areas North-West of the factory. The successfully adopted procedure can serve as a guideline for the environmental forensic investigation of similar pollution incidences.     

Predicted concentrations of biocides from antifouling paints in Visakhapatnam Harbour

The concentrations of biocides leached from antifouling coatings are monitored in most of the developed countries. However, in India and many other developing countries, there is very little data available on the concentrations of biocides in ports and harbours. The first step was to obtain the order of magnitude levels of concentrations of biocides in the marine environment of the Visakhapatnam Harbour, and the MAM-PEC (Marine Antifoulant Model to Predict Environmental Concentrations) model was used to predict these values. The Visakhapatnam Port lies on the eastern coast of India, roughly halfway between Chennai and Kolkata, and is the largest port in India. This port is a natural harbour; the long and narrow outlet to the open sea makes it a 'poorly flushed' harbour. Predicted concentrations of tributyltin (TBT), copper, dichlofluanid, seanine, irgarol, diuron, tolylfluanid, and zinc pyrithione were computed. The results of the computations indicate that the levels of these biocides are comparable to those in many western countries. This gives credence to the fact that persistence of TBT and some other biocides is a global problem that cannot be ignored.     

Indoor Ozone Exposures

Indoor and outdoor ozone concentrations were measured from late May through October at three office buildings with very different ventilation rates. The indoor values closely tracked the outdoor values, and, depending on the ventilation rate, were 20 to 80 percent of those outdoors. The Indoor/outdoor data are adequately described with a mass balance model. The model can also be coupled with reported air exchange rates to estimate indoor/outdoor ratios for other structures. The results from this and previous studies indicate that Indoor concentrations are frequently a significant fraction of outdoor values. These observations, and the fact that most people spend greater than 90 percent of their time indoors, indicate that indoor ozone exposure (concentration × time) is greater than outdoor exposure for many people. Relatively Inexpensive strategies exist to reduce indoor ozone levels, and these could be implemented to reduce the public’s total ozone exposure.