Indoor and outdoor radon measurements at lung cancer patients’ homes in the dwellings of Rize Province in Turkey

In this study, indoor and outdoor radon (²²²Rn) surveys were carried out in the summer and winter seasons in homes of one hundred lung cancer patients in the year 2013–2014. The aim was to investigate the relationship between radon and cancer patients. Lung cancer patients completed a questionnaire concerning their living environment, various physical parameters and living habits. Pearson correlation and t tests revealed no meaningful results between radon concentrations, on one hand, and environmental and personal living habits, on the other hand. Consequently, the BEIR VI model was adapted and ²²²Rn exposure was estimated to be responsible for about 12% of the lung cancer incidences in the winter season and around 5% in the summer season in the Rize Province. However, due to the limited number of data and numerous parameters that could lead to lung cancer, the estimations done with the model should be taken very lightly. The annual effective doses due to inhalation of indoor and outdoor ²²²Rn were estimated to be, respectively, 1.43 and 0.94 mSv y^?1. The indoor and outdoor annual effective doses were, respectively, close and below the world annual effective dose (1.3 mSv y^?1). At the district level, the indoor annual effective dose equivalent in the ?yidere district was 4.52 mSv y^?1, which was 3.5 times greater than the world average. The number of patients in the majority of the houses in this district was more than one.     

Evaluation of industrial waste black cumin (Nigella Sativa) for biohydrogen production without pretreatment

Environment, Development and Sustainability - The depletion of fossil fuels and the fact that fossil fuels pollute the environment accelerated the trend toward environmentally friendly energy...     

Use of carbonised beet pulp carbon for removal of Remazol Turquoise Blue-G 133 from aqueous solution

Carbonised beet pulp (BPC) produced from agricultural solid waste by-product in sugar industry was used as adsorbent for the removal of Remazol Turquoise Blue-G 133 (RTB-G 133) dye in this study. The kinetics and equilibrium of sorption process were investigated with respect to pH, temperature and initial dye concentration. Adsorption studies with real textile wastewater were also performed. The results showed that adsorption was a strongly pH-dependent process, and optimum pH was determined as 1.0. The maximum dye adsorption capacity was obtained as 47.0 mg g^?1at the temperature of 25 °C at this pH value. The Freundlich and Langmuir adsorption models were used for describing the adsorption equilibrium data of the dye, and isotherm constants were evaluated depending on sorption temperature. Equilibrium data of RTB-G 133 sorption fitted very well to the Freundlich isotherm. Mass transfer and kinetic models were applied to the experimental data to examine the mechanisms of adsorption and potential rate-controlling steps. It was found that both external mass transfer and intra-particle diffusion played an important role in the adsorption mechanisms of dye and adsorption kinetics followed the pseudo second-order type kinetic model. The thermodynamic analysis indicated that the sorption process was exothermic and spontaneous in nature.     

Macro- and microelement contents of some legume seeds

Macro- and microelement contents of legume seeds were determined by ICP-AES. The potassium K contents of seeds ranged between 7,426 mg/kg (Lupinus albus L.) and 16,558 mg/kg (Phaseolus vulgaris L. ssp. sphaericus Mart). In addition, while P contents of seeds changed from 2,719 mg/kg (L. albus L.) to 5,792 mg/kg (Vigna sinensis (L.) Savi), Ca contents ranged at the levels between 1,309 mg/kg (Cicer arietinum L.) and 2,781 mg/kg (L. albus L.). The microelement contents of samples were found to be different depending on several species. The iron levels of samples were determined at the levels between 90.51 mg/kg (Phaseolus mungo L.) and 152.80 mg/kg (P. vulgaris L. ssp. sphaericus Mart). In addition, Zn contents of seeds were found between 31.32 mg/kg (C. arietinum L.) and 44.75 mg/kg (V. sinensis (L.) Savi).     

Heavy metals intake by cultured mushrooms growing in model system

Micro element and heavy metal contents of mushrooms were determined by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). It was seen an increase in the heavy metal contents (except Cu and Zn) of the mushrooms until the second dose. A decrease was seen in heavy metal intake of the mushroom in the application of the third dose. The highest accumulation occurred from the upper soils treated with the second dose. Amounts of Cd, Cr, Cu, Pb and Zn, which were accumulated in the mushroom after the application of this dose, were detected as 5.7, 23.1, 75.7, 62.8 and 99.3 ppm, respectively.     

Water quality assessment and meta model development in Melen watershed – Turkey

Istanbul, being one of the highly populated metropolitan areas of the world, has been facing water scarcity since the past decade. Water transfer from Melen Watershed was considered as the most feasible option to supply water to Istanbul due to its high water potential and relatively less degraded water quality. This study consists of two parts. In the first part, water quality data covering 26 parameters from 5 monitoring stations were analyzed and assessed due to the requirements of the “Quality Required of Surface Water Intended for the Abstraction of Drinking Water” regulation. In the second part, a one-dimensional stream water quality model with simple water quality kinetics was developed. It formed a basic design for more advanced water quality models for the watershed. The reason for assessing the water quality data and developing a model was to provide information for decision making on preliminary actions to prevent any further deterioration of existing water quality. According to the water quality assessment at the water abstraction point, Melen River has relatively poor water quality with regard to NH₄⁺, BOD₅, faecal streptococcus, manganese and phenol parameters, and is unsuitable for drinking water abstraction in terms of COD, PO₄^3?, total coliform, total suspended solids, mercury and total chromium parameters. The results derived from the model were found to be consistent with the water quality assessment. It also showed that relatively high inorganic nitrogen and phosphorus concentrations along the streams are related to diffuse nutrient loads that should be managed together with municipal and industrial wastewaters.     

A GIS-based decision support system for determining the shortest and safest route to forest fires: a case study in Mediterranean Region of Turkey

The ability of firefighting vehicles and staff to reach a fire area as quickly as possible is critical in fighting against forest fires. In this study, a Geographical Information System-based decision support system was developed to assist fire managers in determining the fastest and the safest or more reliable access routes from firefighting headquarters to fire areas. The decision support system was tested in the Kahramanmaras Forestry Regional Directoratein the Mediterranean region of Turkey. The study area consisted of forested lands which had been classified according to fire sensitivity. The fire response routing simulations considered firefighting teams located in 20 firefighting headquarter locations. The road network, the locations of the firefighting headquarters, and possible fire locations were mapped for simulation analysis. In alternative application simulations, inaccessible roads which might be closed due to fire or other reasons were indicated in the network analysis so that the optimum route was not only the fastest but also the safest and most reliable path. The selection of which firefighting headquarters to use was evaluated by considering critical response time to potential fire areas based on fire sensitivity levels. Results indicated that new firefighting headquarters should be established in the region in order to provide sufficient firefighting response to all forested lands. In addition, building new fire access roads and increasing the design speed on current roads could also increase firefighting response capabilities within the study area.     

Temporal analysis of coastal erosion in Turkey: a case study Karasu coastal region

Coastal erosion may be caused by natural causes as well as human factors. Karasu town of the city of Sakarya in Turkey which is a touristic region on the Black Sea coast has been experienced a drastic coastal erosion. In recent years, this erosion reached the threatening dimensions for the structures in the settlement. According to the temporal analyses of Landsat satellite images, the maximum erosion on the coastline was detected 100 m between 1987–2013. The results of the study show that the harbour construct on the Karasu coast has the major impact on this event. The secondary factor is that the amount of the sediment carried by the Sakarya River was decreased in time due to different reasons. To prevent the coastal erosion, a series of offshore breakwaters were planned after the failed application of groins on the coastline. In this study, temporal changes of the coastline are investigated by the Landsat satellite data and land surveys, possible reasons of the erosion are discussed and the solutions are proposed regarding the coastal structures.     

Age Structure and Body Size Variation in Common Toad (Bufo bufo,Linnaeus 1758) from Three Different Altitudes in Turkey

Russian Journal of Ecology - We describe here for the first time the body size and age of the Common Toad (Bufo bufo) from high (Trabzon, 1090 m and Kastamonu, 925 m above sea level) and low...