Detection of low-grade mosaicism in fetal cells isolated from maternal blood

Recovering and analysing fetal erythrocytes from maternal blood is being pursued for non-invasive prenatal genetic diagnosis. We report the observation of 46, XY/47, XXY mosaicism in fetal cells from a woman whose first-trimester chorionic villus sampling (CVS) initially showed only 46, XY. Only after exhaustive (500 cells) analysis were four XXY cells found in cultured villi.     

Exposure to methyl methacrylate and its subjective symptoms among dental technicians, Tehran, Iran.

Exposure to methyl methacrylate (MMA), total dust and health symptoms were investigated in 20 dental laboratories located in Tehran, Iran. Time-weighted average (TWA) of MMA and peak concentrations were determined, using XAD-2 tubes followed by GC-FID analysis. Total dusts were evaluated gravimetrically. Health symptoms were asked using a questionnaire. TWA for technicians with direct and indirect exposure to MMA were 327.28 +/- 79.42 and 282.9 +/- 41.84 mg/m3, respectively. Peak concentration of MMA for those technicians were 337.0 +/- 36.81 and 328.88 +/- 45.40 mg/m3, respectively. There were no significant differences between TWA of MMA and peak concentration in different weekly workdays; however, within-day variations were observed (P < .05). TWA of MMA and peak concentration correlation with the laboratory volume were 0.61-0.65. Dust exposure of technicians was 2.35 +/- 2.70 mg/m3. Cough and skin dryness were the common health symptoms. Smoking and asbestos exposure history were factors influencing cough prevalence (p < .05). It is concluded that the current Short-Term Exposure Limit (STEL) is not low enough to protect technicians against the adverse effects caused by MMA.     

Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets

A modified method of severe plastic deformation (SPD) entitled constrained groove pressing-cross route (CGP-CR) was introduced for imposing a high magnitude of equivalent strain of about 2.32 per pass on the sheet form samples. The major benefit of this improved route compared to previous common route was the more homogeneity of strain in the rolling (RD) and transverse (TD) directions of sheets. In this study, low carbon steel samples were used for examination of evolutions in microstructure and mechanical properties during SPD via CGP-CR process. Mechanical properties improvement were measured by tensile and macro hardness tests. The results indicate that CGP-CR process can effectively improve tensile strength; and also, yield stress and hardness of as-received low carbon steel samples were improved up to about 100% after two deformation passes. Also, high magnitude of inhomogeneity can be observed in hardness distribution through first pass of the process which diminishes in the subsequent passes. Microstructural evolutions during process were monitored by optical microscopy observations and X-ray diffraction analysis. The results demonstrate that initial ferritic microstructure with grain size of about 30 μm was refined to a 225 nm cell structure after two passes of CGP-CR process.     

Solid phase extraction for evaluation of occupational exposure to Pb (II) using XAD-4 sorbent prior to atomic absorption spectroscopy.

Lead is an important constituent widely used in different industrial processes. For evaluation of workers' exposure to trace toxic metal of Pb (II), solid-phase extraction (SPE) was optimized. SPE using mini columns filled with XAD-4 resin was developed with regard to sample pH, ligand concentration, loading flow rate, elution solvent, sample volume, elution volume, the amount of resins, and sample matrix interferences. Lead ions were retained on a solid sorbent and then eluted, followed by a simple determination of analytes with flame atomic absorption spectrometery. The obtained recoveries of metal ions were greater than 92%. This method was validated with 3 different pools of spiked urine samples; it showed a good reproducibility over 6 consecutive days as well as 6 within-day experiments. This optimized method can be considered successful in simplifying sample preparation for a trace residue analysis of lead in different matrices when evaluating occupational and environmental exposures is required.     

Mosaicism for trisomy 12: Four cases with varying outcomes

Trisomy 12 observed in chorionic villus sampling (CVS) may reflect generalized mosaicism or indicate mosaicism confined to only the placenta. In this report, four cases of trisomy 12 observed in CVS or cultured placental biopsies with varying outcomes are presented. Seven dinucleotide repeat polymorphisms for chromosome 12 were used to determine the chromosome 12 origins in the fetus or child and to delineate the mechanism(s) that gave rise to the trisomy. In two cases (cases A and C), the mosaicism was confined to the placenta, resulting in normal liveborns. Although, in one case, the molecular results suggested an apparent duplication of one paternal chromosome 12 in the placenta, normal biparental inheritance was found in the diploid fetal cell line in both cases. In two other cases (cases B and D), trisomy 12 was observed in both extraembryonic and fetal tissues. In one of these pregnancies, a child was born by Caesarean section at 37 weeks because of intrauterine growth retardation and oligohydramnios, and resulted in neonatal death. Molecular markers and fluorescence in situ hybridization (FISH) revealed low-level trisomy 12 mosaicism in the spleen. In the fourth case, fetal abnormalities were detected on ultrasound and low-level trisomy 12 mosaicism was observed in amniotic fluid cells using conventional cytogenetics and FISH. Molecular markers revealed a maternal meiosis I non-disjunction of chromosome 12 in DNA from a cultured placental biopsy. Although predicting the outcomes of pregnancies involving confined placental mosaicism remains difficult, molecular techniques are valuable tools for distinguishing uniparental from biparental disomy and mechanisms of mosaicism.     

Pulmonary Functions of Welders in Gas Transmission Pipelines in Iran

This study evaluated the influence of welding on pulmonary functions in welders. Spirometry tests were performed before and after work shift in 91 welders and 25 clerks (control group). We examined forced vital capacity (FVC), forced expiratory volume in 1 s (FEV1), FEV1/FVC ratio and forced expiratory flow 25%-75% (FEF 25–75). Significant differences were found for FVC and FEV1/FVC between welders and the control group in pre- and post-shift measurements (p < .001). In welders, smoking and nonsmoking habit had no significant effects on any pulmonary indices before or after shift. Work experience and fume concentrations also had no significant effects on the majority of spirometric indices (p > .05). Most welders had at least 1 of the respiratory symptoms. Significant differences were found between pre- and post-shift indices (as percentage of predicted values calculated with spirometer) and between the welders engaged in some welding tasks and the control group before work shift. This study documented work-related changes in pulmonary functions in the welders and marked drops in these functions without symptoms in some welders.     

Starting improvement of micro-wind turbines operating in low wind speed regions

The study deals with the design and optimization of external and internal geometry of micro-wind turbines blades. A specified objective function which consists of the power coefficient and the starting time was defined and the genetic algorithm optimization technique in conjunction with the blade-element momentum theory was adopted to find the geometry of the blades including the distributions of the chord, the twist angle and also the shell thickness. Moreover, the allowable stress of the blades was considered as a constraint to the objective function. Results show that a reasonable compromise is achievable such that the starting time of the blades reduces noticeably in return for a small drop in the power coefficient. The significant improvement of the hollow blades over the solid ones indicates that the power coefficient and the starting performance could be improved through the appropriate distributions of the considered decision variables, i.e. the chord, the twist angle and also the shell thickness.     

Evaluation of the use of diffusive air samplers for determining temporal and spatial variation of volatile organic compounds in the ambient air of urban communities

The Houston-Galveston metropolitan area has a relatively high density of point and mobile sources of air toxics, and determining and understanding the relationship between emissions and ambient air concentrations of air toxics is important for evaluating potential impacts on public health and formulating effective regulatory policies to control this impact, both in this region and elsewhere. However, conventional ambient air monitoring approaches are limited with regard to expense, siting limitations, and representative sampling necessary for adequate exposure assessment. The overall goal of this multiphase study is to evaluate the use of simple passive air samplers to determine temporal and spatial variability of the ambient air concentrations of selected volatile organic compounds (VOCs) in urban areas. Phase 1 of this study, reported here, was a field evaluation of 3M organic vapor monitors (OVMs) involving limited comparisons with commonly used active sampling methods, an assessment of sampler precision, a determination of optimal sampling duration, and an investigation of the utility of a simple modification of the commercial sampler. The results indicated that a sampling duration of 72 hr exhibited generally low bias relative to automated continuous gas chromatography measurements, good overall precision, and an acceptable number of measurements above detection limits. The modified sampler showed good correlation with the commercial sampler, with higher sampling rates, although lower than expected.