Assessment of regional metal levels in ambient air by statistical regression models

The assessment of the particulate matter (PM) levels and its constituents presented in the atmosphere is an important requirement of the air quality management and air pollution abatement. The heavy metal levels in PM10 are commonly evaluated by experimental measurements; nevertheless, the EC Directives also allow the Regional Governments to estimate the regulated metal levels (Pb in Directive 2008/50/EC and As, Ni and Cd in Directive 2004/107/EC) by objective estimation and modelling techniques. These techniques are proper alternatives to the experimental determination because the required analysis and/or the number of required sampling sites are reduced. The present work aims to estimate the annual levels of regulated heavy metals by means of multivariate linear regression (MLR) and principal component regression (PCR) at four sites in the Cantabria region (Northern Spain). Since the objective estimation techniques may only be applied when the regulated metal concentrations are below to the lower assessment threshold, a previous evaluation of the determined annual levels of heavy metals is conducted to test the fulfilment of the EC Directives requirements. At the four studied sites, the results show that the objective estimations are allowed alternatives to the experimental determination. The annual average metal concentrations are well estimated by the MLR technique in all the studied sites; furthermore, the EC quality requirements for the objective estimations are fulfilled by the developed statistical MLR models. Hence these estimations may be used by Regional Governments as a proper alternative to the experimental measurements for the regulated metal levels assessment.     

Waste minimisation in a hard chromiun plating Small Medium Enterprise (SME)

The high potential of waste stream minimisation in the metal finishing sector justifies specific studies of Small and Medium Enterprises (SME). In this work, the minimisation options of the wastes generated in a hard chromium plating activity have been analysed. The study has been performed in a small job shop company, which works in batch mode with big pieces. A process flowsheet after connecting the unit operations and determining the process inputs (raw and secondary materials) and outputs (waste streams) has been carried out. The main properties, quantity and current management of the waste streams have been shown. The obvious lack of information has been identified and finally the waste minimisation options that could be adopted by the company have been recorded.     

Evaluation of the urban/rural particle-bound PAH and PCB levels in the northern Spain (Cantabria region)

The aim of the present study was to evaluate the polycyclic aromatic hydrocarbon (PAH) and polychlorinated biphenyl (PCB) levels in PM(10) and PM(2.5), at one rural and three urban sites in the Cantabria region (northern Spain). From all of these pollutants, benzo(a)pyrene is regulated by the EU air quality directives; its target value (1?ng/m(3)) was not exceeded. The concentration values of the studied organic pollutants at the studied sites are in the range of those obtained at other European sites. A comparison between the rural-urban stations was developed: (a) PAH concentration values were lower in the rural site (except for fluorene). Therefore, the contribution of local sources to the urban levels of PAHs seems relevant. Results from the coefficient of divergence show that the urban PAH levels are influenced by different local emission sources. (b) PCB rural concentration values were higher than those found at urban sites. Because no local sources of PCBs were identified in the rural site, the contribution of more distant emission sources (about 40?km) to the PCB levels is considered to be the most important; the long-range transport of PCBs does not seem to be significant. Additionally, local PAH tracers were identified by a triangular diagram: higher molecular weight PAHs in Reinosa, naphthalene in Santander and anthracene/pyrene in Castro Urdiales. A preliminary PAH source apportionment study in the urban sites was conducted by means of diagnostic ratios. The ratios are similar to those reported in areas affected by traffic emissions; they also suggest an industrial emission source at Reinosa.     

Physico-chemical and toxicological characterization of the historic estuarine sediments: a multidisciplinary approach

The accumulation rates, the geochronology of metals and PAH contamination, and the Microtox toxicity are studied in five sediment cores (50 cm length) covering different areas of the Santander Bay, Northern Spain. Chronology given by (210)Pb and (137)Cs reveals significant differences in accumulation rates between sites (0.2-1.1 cm/year), as well as a variable degree of anthropogenic enrichment factors for Fe, Mn, Cu, Pb, Zn, Ni (from 1 to 15) and concentrations of summation Sigma 16PAHs (from 0.01 to 23.84 mg/kg dw) in sediments over the last 90 years. The results indicate the increasing contamination pressure from industrial and urban activities along the Bay. No toxic results from the Microtox test are obtained either with pore water or with normalised sediment aqueous extracts (European Norm EN 12457), suggesting low water solubility and low availability of contaminants in the studied sediments. However, the EC50 values from the Microtox Basic Solid Phase Test (BSPT) ranged from 0.03% to 2.35%, showing vertical toxicity profiles in accordance with metal and PAHs behaviour. The correlation degrees of Microtox BSPT toxicity to chemical concentration in sediment profiles are widely variable showing a high site-dependent toxicity. The oligochaete Limnodrilus hoffmeisteri has been used as a chronic bioassay over surface sediments of two of the studied sites, showing results coherent with the Microtox BSPT acute test results. Global results of the present work provide regional geochemical baselines for metals and PAHs and toxicological data now make it possible to obtain a preliminary quality assessment of the Santander Bay sediment profiles.     

Inertization of toxic wastes

Toxic wastes, usually found as byproducts of industrial processes originate a constant degradation of the Environment and a complex scientific and technical problem. A Solidification/Inertization technique has been applied to the control of the landfill disposal of steel foundry dust. Based on lixiviation test results are given on possibilities to reduce lead, chromium and cadmium emission to the Environment.     

Organochlorine pesticide residues in sediments from coastal environment of Cantabria (northern Spain) and evaluation of the Atlantic Ocean

This paper documents levels of organochlorine pesticides (OCs) in coastal surface sediments from selected reference sites on the northern Atlantic Spanish coast. One hundred eight samples covering three estuaries in the Cantabrian Coast were sampled in 2006 and analyzed in the finer fraction (<63 ??m) for 19 OCs by gas chromatography with electron capture detector after confirmation by mass spectrometry. Detected organochlorine pesticides were endosulfan ??, endosulfan ??, endosulfan sulfate, hexachlorobenzene (HCB), aldrin, dieldrin, methoxychlor, 1,1-dichloro-2,2-bis(4-chlorophenyl)ethylene (4,4??-DDE) and 1,1-dichloro-2,2-bis(4-chlorophenyl)ethane (4,4??-DDD). Total OCs concentrations ranged from 1.8 ng g^???1 dry weight (dw) to 3.9 ng g^???1 dw, showing a uniform distribution along the studied area, and being consistent with recorded levels in the literature for coastal sediments in other reference sites with low levels of pollution by OCs along the Atlantic Ocean. Endosulfan, 4,4??-DDD, HCB, aldrin, and dieldrin seemed to be ubiquitous as the legacy of past uses and deposition. OCs concentrations were significantly correlated to organic matter content and particle size distribution. No adverse biological effects derived from these pollutants are expected to take place as it can be concluded from the comparison with the existent marine sediment quality guidelines.     

Contribution to closing the loop on waste materials: valorization of bottom ash from waste-to-energy plants under a life cycle approach

Incineration has undergone several technology improvements, reducing air emissions and increasing the efficiency of energy and material recovery; however, there is still a long way to go. To analyze the environmental impacts of waste incineration, this study assessed 15 waste fractions that compose municipal waste in Spain, which are grouped as non-inert materials (plastics, paper, cardboard and organic matter), unburned materials (glass and Al) and ferrous materials. Additionally, this paper evaluates the valorization of bottom ash (BA) to produce steel, aluminum and cement in these recycled/recoverable waste fractions. The results depend on the input waste composition and the heating value (HHV) and showed that ferrous and unburned materials had the worst environmental performance due to the null HHV. The valorization of BA in steel, Al and cement production significantly reduced the environmental impact and the consumption of resources. BA recycling for secondary steel and Al production would improve the environmental performance of the combustion of unburned materials and ferrous materials, whereas the use of BA in cement production diminished the consumption of NR for non-inert materials. This is of great interest for organic matter and PC, waste with a low energy production and high heavy metal and sulfur content.     

Environmental assessment of polycyclic aromatic hydrocarbons (PAHs) in surface sediments of the Santander Bay,Northern Spain

Samples of intertidal surface sediments (0-2 cm) were collected in 17 stations of the Santander Bay, Cantabric Sea, Northern Spain. The concentrations of polycyclic aromatic hydrocarbons (PAHs), 16, were analysed by HPLC and MS detection. Surface sediments show a good linear correlation among the parameters of the experimental organic matter evaluation, where total carbon (TC) and loss on ignition (LOI) are approximately 2.5 and 5 times total organic carbon (TOC). A wide range of TOC from 0.08% to 4.1%, and a broad distribution of the sum of sigma16PAHs, from 0.02 to 344.6 microg/g d.w., which can be correlated by an exponential equation to the TOC, has been identified. A qualitative relationship may be established between the industrial input along the rivers and the concentration of sigma6PAHs in the sediments of the estuaries: Boo estuary (8404-4631 microg/g OC), Solia-San Salvador estuaries (305-113 microg/g OC) and Cubas estuary (31-32 microg/g OC). This work shows a dramatic change in the spatial distribution in the concentration of PAHs of intertidal surface sediments. The left edge of the Bay has the main traffic around the city and the major source of PAHs is from combustion processes and estuarine inputs, leading to medium values of PAHs in the sediments; the right edge of the Bay has much lesser anthropogenic activities leading to lower values of PAHs in sediments. The distribution of individual PAHs in sediments varies widely depending on their structure and molecular weight; the 4-6 ring aromatics predominate in polluted sediments due to their higher persistence. The isomer ratio does not allow any clear identification of the PAHs origin. Environmental evaluation according to Dutch guidelines and consensus sediment quality guidelines based on ecotoxicological data leads to the same conclusion, sediments in the Santander Bay show a very different environmental quality depending on the spatial position from heavily polluted/medium effects to non-polluted/below threshold effects. These results indicate that local sources of PAHs, especially estuary discharges, lead to very different qualities of sediments in coastal zones, where traffic and industrial activities take place.     

Impact of the global economic crisis on metal levels in particulate matter (PM) at an urban area in the Cantabria Region (Northern Spain)

Air pollution by particulate matter is well linked with anthropogenic activities; the global economic crisis that broke out in the last year may be a proper indicator of this close relationship. Some economic indicators show the regional effects of the crisis on the Cantabria Region. The present work aims to evaluate the impact of the economic crisis on PM10 levels and composition at the major city of the region, Santander. Some metals linked to anthropogenic activities were measured at Santander and studied by Positive Matrix Factorization; this statistical analysis allowed to identify three main factors: urban background, industrial and molybdenum-related factor. The main results show that the temporal trend of the levels of the industrial tracers found in the present study are well agree with the evolution of the studied economic indicators; nevertheless, the urban background tracers and PM10 concentration levels are not well correlated with the studied economic indicators.     

Distribution of butyltin and derivatives in oyster shells and trapped sediments of two estuaries in Cantabria (Northern Spain)

Distribution of butyltin compounds (BTs) and derivatives (monobutyltin, MBT; dibutyltin, DBT and tributyltin, TBT) was analysed in Crassostrea gigas oyster shells and the sediments trapped in the shell chambers, from two different estuaries in Cantabria (Northern Spain), with very different environmental conditions, where previous data have not been reported. Inorganic tin analysis in oyster shells was performed in order to study the degradation of BTs. Shell thickening and losses in biological growth are related with the presence of TBT, and were determined using three morphological indexes. Total BTs concentrations, expressed as Sn, ranged from 18.0 ng g(-1) to 176.7 ng g(-1) in sediments, and from 2.4 ng g(-1) to 11.1 ng g(-1) in oyster shells. Total inorganic tin concentrations ranged from 1775.0 ng g(-1) to 4781.3 ng g(-1) in oyster shells. The amount of BTs in oyster shells has been associated with the concentrations in the sediments trapped in the shell chambers. Partition coefficients between oyster sediments and oyster shells show the affinity of BTs by the sediments and the higher inorganic tin in oyster shells does not seem to be related to the BTs pollution.