Biodegradation of crosslinked acrylic polymers by a white-rot fungus

Two synthetic superabsorbent crosslinked acrylic polymers were mineralized by the white-rot fungusPhanerochaete chrysosporium. The amount of polymer converted to CO₂ increased as the amount of polymer added to the cultures increased. In the presence of sufficiently large amounts of the superabsorbents, such that all of the culture fluid was absorbed and a gelatinous matrix was formed, the fungus still grew and mineralization was observed. Neither the polymers, nor their degradation products were toxic to the fungus. While the rates of mineralization were low, all of the polymers incubated in the liquid fungal cultures were completely depolymerized to water soluble products within 15–18 days. The depolymerization of the polymers was observed only in nitrogen limited cultures of the fungus which secrete the lignin degradation system, however, the water soluble products of depolymerization were mineralized in both nutrient limited and sufficient cultures of the fungus. The rate of mineralization of the depolymerized metabolites was more than two times greater in nutrient sufficient cultures. Following longer incubation periods, most (> 80 %) of the radioactivity was recovered in the fungal mycelial mat suggesting that carbon of the polymer had been converted to fungal metabolites.     

Household ecological footprinting using a new diary-based data-gathering approach

Although the household level is recognized as a potentially important area for the application of ecological footprint (EF) analysis, almost no work has been reported in the academic literature on EF analysis at this level. This paper describes the application of a new, diary-based data acquisition methodology used in a component approach to estimate the EF of a small number of households in Aberdeen, Scotland. Feedback from householders indicated that the diary proved useful in educating participants about their environmental impacts and made EF findings convincing. The methodology was, however, time consuming for both participants and researchers, and it is concluded that future household level applications of EF analysis might combine a simplified diary with other forms of data acquisition. Findings also suggest that the presentation of EF results alone is unlikely to promote more environmentally conscious attitudes amongst householders unless specific EF components are identified for the householder to act upon.     

Flow-injection analysis with fluorescence detection for the determination of trace levels of ammonium in seawater

A method using flow-injection, gas-diffusion, derivatisation and then fluorescent detection has been established for ammonium ion determination in seawater. The fluorescent derivative formed by reacting ortho-phthaldialdehyde (OPA) and sulfite with ammonia gives high sensitivity while removing potential interferences. This is required to measure the low concentrations of ammonium often seen in the open ocean. The experimental conditions (flow-rate, reagent concentrations, membrane configurations, etc.) were manipulated to improve performance. For a sample throughput of 30 samples h(-1), the limit of detection was 7 nM, the coefficient of variation was 5.7% at 800 nM, and the calibration curve was linear to at least 4 micromol L(-1). Interferences were minimised by a gaseous diffusion step. Volatile small molecular-weight amines as interferents were discriminated against by this method. They neither passed through the membrane as efficiently as ammonia, nor reacted as readily with OPA when sulfite was the reductant. Contamination by ammonia from laboratory and shipboard sources complicates application of the method to natural waters, especially measurement of low concentrations (<100 nM) in open-ocean waters. Steps to overcome contamination are described in detail. Some results are presented for ammonium determination in Southern Ocean and Huon Estuary (Tasmania) waters.     

Fractionation of Cu, Pb and Zn in certified reference soils SRM 2710 and SRM 2711 using the optimized BCR sequential extraction procedure

Sequential extraction of metals from solid media is a common analytical tool used in environmental and exploration geochemistry. A number of procedures exist, but without harmonization and standardization, meaningful comparisons are tenuous without baseline data. A newly developed, standardized sequential extraction procedure (optimized BCR) was applied to two contaminated certified reference soils from Montana, US (SRM 2710 and SRM 2711) for Cu, Pb and Zn. Four operationally defined fractions were isolated, acid extractable, reducible, oxidizable, and residual (by aqua regia). Fraction-specific concentrations, percentages and recoveries for Cu, Pb and Zn were used to explore differences between the optimized BCR procedure and three other sequential extraction schemes with published data for SRM 2710 and 2711 (i.e. Tessier scheme, Geological Survey of Canada scheme and the original BCR scheme). Results indicate significant differences between the four schemes, even for schemes that are closely associated (i.e. the original and optimized BCR schemes). Order-of-magnitude fraction-specific concentration differences were observed, especially for Pb in the reducible fraction. Differences between schemes are worrisome because trends varied between metals, between fractions and between reference soils. These data reinforce the need for increased adoption of standardized sequential extraction procedures and further examination of different solid media.     

Prenatal diagnosis of the fragile X using thymidine induction

Eleven pregnancies in ten patients at risk for the fragile X were monitored by amniocentesis or chorion villus biopsy and induction of the fragile site using thymidine, methotrexate and FUdR. Three female fetuses and one male fetus were found to have the fragile X. The results obtained using thymidine induction were superior to those using methotrexate induction and probably better than those obtained using FUdR induction.     

A participatory approach to the establishment of a baseline scenario for a reforestation Clean Development Mechanism project

This paper is part of a two-year study to investigate the feasibility of initiating a Clean Development Mechanism (CDM) project in an indigenous community of Eastern Panamá, Ipetí-Emberá. We use participatory mapping and matrices as well as household surveys to develop a land-use/land-cover baseline scenario and examine the role of local participation in assessing land-use change. In Ipetí, land-use change has not occurred in a linear way over the last decades, and our data unveils socio-economic factors as potential key drivers of change. The concordance that we observed between geographic information and individual and collective perceptions of land-use change substantiates the possibility of using local knowledge in the establishment of baseline data for CDM projects. Our calculations suggest that the total carbon (C) stocks in the Tierra Colectiva (TC) of Ipetí-Emberá in 2004 represents a 47% reduction from the estimated C stock at the onset of settlement in the early 1970’s. Results from the participatory assessments predict that, in 2024 and in absence of a CDM project, the C stocks will decline from 301,859 t C in 2004 to 155,730 t C, which constitutes a reduction of 52%. The scenario with CDM estimates C stocks of 305,853 t C for 2024, a value slightly superior to the 2004 value. In the TC there is ground to believe that cattle ranching is likely to become an ever more important activity as the population is young and growing and cannot easily move elsewhere. Forests tend to be cleared for cultivation while pastures are established on short fallows. Our baseline scenario underlines the potential for a CDM project to make a significant difference in the future C stocks of this landscape.     

Effect of Cross-Linking Waste Protein with Dialdehydes on Its Biodegradation Under Anaerobic Conditions

Most native polymers used in processing and application technologies are admittedly disposable from the environment in a biologic manner, but products possess low mechanical strength. One of the paths to increasing this attribute (if feasible) is their cross-linking, which may, however, affect their readiness to biodegradation. In the presented work this condition was observed on the example of waste protein (Hykol B) cross-linking by means of glutardialdehyde and glyoxal. Degree and course of cross-linking were determined through impedance spectroscopy. The objective of this work also was to obtain data for constructing a sensor capable of following the cross-linking course in real time, for potential industrial application of Hykol in continuous production. Impedance spectroscopy proved to be applicable even to this kind of material marked by considerable water content and exhibiting relatively high electric conductivity; so far it had been used only for materials of low conductivity. An aqueous environment inoculated with digested anaerobic sludge from a municipal wastewater treatment plant was selected for modeling anaerobic conditions. The relation was studied between cross-linking degree given by content of cross-linking agent (determined by impedance spectroscopy) and biodegradation degree under anaerobic conditions. It was confirmed that network density as given by quantity of added agent not only reduced breakdown degree but also slowed the course of the process. This fact is particularly obvious with cross-linking by means of glyoxal; network density is thus dependent on type of employed substance, which affect type and structure of created network. That not merely forms an obstacle during polymer swelling and dissolution but also prevents access of bacteria to source of metabolized organic carbon.     

Book reviews

Earth Politics. Ernst Ulrich von Weizsacker, 1994, London, Zed Books, 234 pp. ISBN 1 85649 174 9, pb £14.95; hb £36.95

Greening Your Local Authority. Janice Morphet (Ed.), 1994, London, Pitman Publishing (originally Harlow, Longman), 144 pp. ISBN 0582 229 065, pb £32.50

Ecology and Society: an introduction. Luke Martell, 1994 London, Polity Press, 250 pp. ISBN 0 7456 1022 6, hb £39.50, ISBN 0 7456 1023 4, pb £11.95

The Politics of the Environment. Robert E. Goodin, 1994. Cheltenham, Edward Elgar, 599 pp. ISBN 1 85278 872 0, hb £115.00

Introduction to Environmental Impact Assessment John Glasson, Riki Therivel & Andrew Chadwick, 1994, London, UCL Press, 352 pp. ISBN 1 85728 117 9, hb £45.00, ISBN 1 85728 118 7, pb £14.95

Planning for the Planet: sustainable development strategies for local and strategic plans. Friends of the Earth, 1994, London, FoE, 104 pp. ISBN 1 85750 224 8, £12.00

Environmental Strategy and Sustainable Development: the corporate challenge for the 21st century. Richard Welford, 1995, London, Routledge, 240 pp. ISBN 0 415 10551 X, hb £40.00, ISBN 0 415 10552 8, pb £12.99

Housing and the Environment: a new agenda. Mark Bhatti, Jane Brooke & Mike Gibson (Eds), 1994, Foreword by Jonathon Porritt, Coventry, Chartered Institute of Housing, 210 pp. ISBN 0 901 607 738, £14.95     

Research priorities for managing the impacts and dependencies of business upon food,energy, water and the environment

Delivering access to sufficient food, energy and water resources to ensure human wellbeing is a major concern for governments worldwide. However, it is crucial to account for the ‘nexus’ of interactions between these natural resources and the consequent implications for human wellbeing. The private sector has a critical role in driving positive change towards more sustainable nexus management and could reap considerable benefits from collaboration with researchers to devise solutions to some of the foremost sustainability challenges of today. Yet opportunities are missed because the private sector is rarely involved in the formulation of deliverable research priorities. We convened senior research scientists and influential business leaders to collaboratively identify the top forty questions that, if answered, would best help companies understand and manage their food-energy-water-environment nexus dependencies and impacts. Codification of the top order nexus themes highlighted research priorities around development of pragmatic yet credible tools that allow businesses to incorporate nexus interactions into their decision-making; demonstration of the business case for more sustainable nexus management; identification of the most effective levers for behaviour change; and understanding incentives or circumstances that allow individuals and businesses to take a leadership stance. Greater investment in the complex but productive relations between the private sector and research community will create deeper and more meaningful collaboration and cooperation.