Optimal charges on river effluent from lumped and distributed sources

We propose a modelling framework for the design of a Pigouvian effluent tax, in an environmental management problem implicating several economic agents located in a river basin. The proposed charging system allows for the agents' geographical position relative to the river's sections, at which environmental standards are to be enforced, and takes into account the possible different market structures within which the agents are operating. In particular, we consider industrial agents competing on an oligopolistic market, and a set of farmers acting as price takers on a large market. A regional authority's goal is to induce agents to some sort of cooperation which would result in the satisfaction of the common environmental constraints. The economic process on one side, and the pollution transport and accumulation on the other, constitute two dynamic processes in two different time scales. As the economic process is much slower than the other process we can neglect the latter's transients and concentrate on the time invariant steady state solutions to the transportation equation. The model thus constructed has some noncooperative game and optimal control problem's features with space being the ‘running’ variable. This revised version was published online in July 2006 with corrections to the Cover Date.     

The adaptive significance of male polymorphism in the acarid mite Caloglyphus berlesei

Summary Two forms of males occur in the acarid mite, Caloglyphus berlesei. One of them uses its thickened third pair of legs to kill other males; the other, without modified legs, does not attack other males. Previous studies have shown that the form of the male is environmentally determined: fighter males develop only at low population densities and their development can be suppressed by substances emanating from dense colonies. In this study, the duration of development, longevity and virility of the two male morphs were measured. The only significant difference was that fighters had a shorter development time between the two last moults. In another experiment, two groups of colonies were maintained under the same conditions but had different numbers of individuals: small colonies contained 2 fighters and 2 non-fighters, whereas large colonies contained 30 males of each type. The relative reproductive success of both morphs was estimated from numbers of matings. In small colonies, the estimated reproductive success (ERS) was significantly higher for fighters than for non-fighters, mainly because in over 50% of these colonies a single fighter male managed to kill all the rival males and monopolize the females. The opposite was true in large colonies, in which non-fighters achieved significantly higher ERS, mainly because the fighters were killed in fights more often than the non-fighters. This implies that the ratio of costs to benefits obtained by adopting the fighter-male strategy increases with the number of rival males, which may explain conditional male development in C. berlesei.     

Empirical Estimation of Virtual Point Source Height Over a Bank of Coke Ovens

This paper addresses an empirical method of assessment of the height of a virtual point source. In order to achieve such assessment, three planes defining the location of a virtual point source in a space are created and formulas describing the geometry of observer’s sight and plume orientation are used. Data for calculations are obtained on a basis of plume photographs. The final position of a virtual emission point is described by a set of its coordinates in the Cartesian coordinate system. Presented method may be applied as a means to verify and validate the existing formulas describing the rise of plume above the stack exit or as a tool enabling acquisition of information for the sake of creating new formulas of this type. The calculation of the location of a virtual point source ascribed to the point emission from the roof of the bank of coke oven is presented and illustrated with photographs which reveal position of plume, adequate planes, axes and characteristic objects.     

Analytical insight into degradation processes of aminopolyphosphonates as potential factors that induce cyanobacterial blooms

Environmental Science and Pollution Research - Aminopolyphosphonates (AAPs) are commonly used industrial complexones of metal ions, which upon the action of biotic and abiotic factors undergo a...     

Effective bioremoval of Fe(III) ions using paprika (Capsicum annuum L.) pomace generated in the food industry

In these studies, removal of Fe(III) ions by biosorption processes from aqueous solutions was carried out using paprika (Capsicum annuum L.) pomace generated during processing in the food industry. The biosorbent material was characterized using several analytical methods, including particle size distribution, XRD, SEM–EDS, electrokinetic zeta potential, surface area analysis (BET, BJH), thermogravimetry, morphology (SEM), spectrophotometry FT-IR. Several factors, such as biosorbent dosage, initial concentration, contact time and initial pH were analyzed to show an effect on the bioremoval process, efficiency and adsorption capacity. As a result, the maximum adsorption efficiency and capacity were determined to be 99.1% and 7.92 mg/g, respectively. Based on the kinetics analysis, the bioremoval process is better described by the Langmuir isotherm model and the pseudo-second order equation model. In conclusion, the achieved research results suggest that paprika biomass can be an effective material for efficiently removing iron(III) from wastewater and improving water quality. These studies on the recovery of iron metal from the environment fit in the latest trends in the concept of the global circular economy.

     

Field scale evaluation of volatile organic compound production inside biosecure swine mortality composts

Emergency mortality composting associated with a disease outbreak has special requirements to reduce the risks of pathogen survival and disease transmission. The most important requirements are to cover mortalities with biosecure barriers and avoid turning compost piles until the pathogens are inactivated. Temperature is the most commonly used parameter for assessing success of a biosecure composting process, but a decline in compost core temperature does not necessarily signify completion of the degradation process. In this study, gas concentrations of volatile organic compounds (VOCs) produced inside biosecure swine mortality composting units filled with six different cover/plant materials were monitored to test the state and completion of the process. Among the 55 compounds identified, dimethyl disulfide, dimethyl trisulfide, and pyrimidine were found to be marker compounds of the process. Temperature at the end of eight weeks was not found as an indicator of swine carcass degradation. However, gas concentrations of the marker compounds at the end of eight weeks were found to be related to carcass degradation. The highest gas concentrations of the marker compounds were measured for the test units with the lowest degradation (highest respiration rates). Dimethyl disulfide was found to be the most robust marker compound as it was detected from all composting units in the eighth week of the trial. Concentration of dimethyl disulfide decreased from a range of 290–4340 ppmv to 6–160 ppbv. Dimethyl trisulfide concentrations decreased to a range of below detection limit to 430 ppbv while pyrimidine concentrations decreased to a range of below detection limit to 13 ppbv.     

Colony size,but not density,affects survival and mating success of alternative male reproductive tactics in a polyphenic mite,Rhizoglyphus echinopus

Among acarid mites, a number of species are characterised by the presence of discontinuous morphologies (armed heteromorphs vs. unarmed homeomorphs) associated with alternative mating tactics (fighting vs. scramble competition). In Rhizoglyphus echinopus, expression of the fighter morph is suppressed, via pheromones, in large, dense colonies. If this mechanism is adaptive, fighters should have relatively lower fitness in large and/or dense colonies, due to costs incurred from fighting, which is often fatal. In order to test these predictions, we quantified the survival and mating success of fighters and scramblers in colonies of equal sex and morph ratios; these colonies either differed in size (4, 8, or 32 individuals) but not density or differed in density but not size (all consisted of 8 individuals). We found that the relative survival and mating success of fighters was inversely related to colony size, but we did not find a significant effect of colony density. The higher mating success of fighters in small colonies was due to the fact that, after killing rival males, these fighters were able to monopolise females. This situation was not found in larger colonies, in which there was a larger number of competitors and fighters suffered relatively higher mortality. These results indicate that morph determination, guided by social cues, allows for the adaptive adjustment of mating tactics to existing demographic conditions.     

A review of municipal solid waste composition and quantities in Poland

A review of results of the research involving the quantitative and composition analyses of household waste conducted in Poland in recent years is presented in this paper. For these analyses various methodologies have been employed, as there is not one obligatory methodology how to characterise municipal solid waste. The results of the research in large Polish cities indicate great variability, which is difficult to be reasonably explained. This situation is affected by a number of factors, such as various methods and places for sample collection, various methods for tests, fractional character of most of the studies (studies carried out only in some periods during a year). Consequently, it is neither possible to measurably compare their results, nor to generalise them. Hence, within this article only individual data for large cities is provided. It is therefore necessary to standardise methodology for such analyses in Europe, taking into account local variability (such as different housing patterns, climate and waste collection schemes) to allow comparison of results.Reported yearly household waste generation in Polish cities varies from 238 to 309 kg per inhabitant. Biodegradable waste is a strongly dominated fraction in household waste from Polish cities, followed by paper/cardboard and plastics. Historical data shows that waste composition has undergone profound changes, the most significant being an increase of the share of plastics and decrease of fine fraction. The presented data indicates that waste composition strongly depends on the type of housing and its heating system. In the new multi-family buildings with central heating the share of paper and plastics is higher than in old houses with individual heating. In the latter ones the share of fine fraction is higher.     

Inorganic and methyl-mercury speciation in sediments of the Swarzędzkie Lake

Sediment samples were analysed for mercury and methylmercury content in different parts of the bottom sediment of Swarz ?dzkie Lake, which were influenced by different external pollution sources. The results of determination with two methods of mineralization using two separate media (HNO₃/H₂O₂ and HF) were compared. The accuracy of the studied methods was analysed using certified reference material IAEA 405 of river sediment. The recovery of mercury was satisfactory and ranged from 97.5 to 98.8%. Methylmercury compounds in the studied sediments were found in limited concentrations. Their concentrations ranged from 0.26 to 58.1 μg kg^?1, i.e. 1.0–7.4% of the total mercury content. The depth profile displayed high values of both total and methylmercury content at a depth of 10–20 cm, related to the heavy pollution of the lake in the 1980s. Canonical analysis displayed the relationship of both total mercury and methylmercury concentrations with organic matter and phosphorus content in bottom sediments.