Melatonin ameliorates chronic copper-induced lung injury

Environmental Science and Pollution Research - Copper (Cu) is an important trace element required for several biological processes. The use of copper is increasing gradually in several...     

Evaluation of hexachlorocyclohexane contamination from the last lindane production plant operating in India

Purpose

??-Hexachlorocyclohexane (HCH), ??-HCH, and lindane (??-HCH) were listed as persistent organic pollutants by the Stockholm Convention in 2009 and hence must be phased out and their wastes/stockpiles eliminated. At the last operating lindane manufacturing unit, we conducted a preliminary evaluation of HCH contamination levels in soil and water samples collected around the production area and the vicinity of a major dumpsite to inform the design of processes for an appropriate implementation of the Convention.

Methods

Soil and water samples on and around the production site and a major waste dumpsite were measured for HCH levels.

Results

All soil samples taken at the lindane production facility and dumpsite and in their vicinity were contaminated with an isomer pattern characteristic of HCH production waste. At the dumpsite surface samples contained up to 450?g?kg^?1 ?? HCH suggesting that the waste HCH isomers were simply dumped at this location. Ground water in the vicinity and river water was found to be contaminated with 0.2 to 0.4?mg?l^?1 of HCH waste isomers. The total quantity of deposited HCH wastes from the lindane production unit was estimated at between 36,000 and 54,000?t.

Conclusions

The contamination levels in ground and river water suggest significant run-off from the dumped HCH wastes and contamination of drinking water resources. The extent of dumping urgently needs to be assessed regarding the risks to human and ecosystem health. A plan for securing the waste isomers needs to be developed and implemented together with a plan for their final elimination. As part of the assessment, any polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDF) generated during HCH recycling operations need to be monitored.     

Bright photophase accelerates re-entrainment after experimental jetlag in Drosophila

The efficacy of bright photophase (BP) in accelerating the re-entrainment of Drosophila biarmipes rhythm following 8?h phase advance and delay of light–dark (LD) cycle was examined by subjecting the flies to 24?h LD cycles with dim photophase (DP) at 30?lx and BP at 300?lx. Re-entrainment was analysed by using the activity onset, activity offset and the duration of activity. Following LD advance or delay, the BP flies re-entrained faster than the DP flies which was attributed to the enhanced zeitgeber strength of BP. Nevertheless, the re-entrainment was a protracted process even in the BP flies since the activity offsets underwent more transients than the activity onsets. Thus, this study demonstrates that the BP accelerates the re-entrainment in D. biarmipes. It, however, also reveals that the re-entrainment is a prolonged process when the activity onset and offset are regarded as the rhythm markers.     

The probabilistic tsunami hazard assessment along Karnataka Coast from Makran Subduction Zone,west coast of India

Coastal tsunami amplitudes were calculated to identify areas susceptible to tsunami hazard at selected locations of the coast of Karnataka, west of India, due to earthquakes in the Makran Subduction Zone. This is the first time that the probabilistic tsunami hazard assessment along this study area has been attempted. A series of earthquake source scenarios with magnitudes of Mw 8.0, Mw 8.5, and a mega thrust of Mw 9.1 were modeled by using the Community Model Interface for Tsunami interface with the MOST model of Titov and Synolakis (J. Waterway, Port, Coastal and Ocean Engineering, 121(6), 308–316, 1995). As per the previous occurrences, the two least magnitudes are probable, while Mw 9.1 is a worst-case scenario as described by Heidarzadeh et al. (Ocean Engineering, 36(5), 368–376, 2009) and the same is reported by Burbidge et al. (Geoscience Australia Professional Opinion No. 2009/11) as high magnitude. These are not at all historical earthquakes or specifically from historical catalogues. The results of modeling show that all the seven coastal locations are inundated barely in our worst-case scenario with maximum water levels in the range of 100–200 cm. The first tsunami wave strikes the coast within 4–5 h of earthquake occurrence.     

Carbon mitigation potential of Indian steel industry

Steel dominates the global metal production accounting for 5 % of increase in Earth’s atmospheric carbon dioxide (CO₂). Today, India is the 4th largest producer of crude steel in the world. The sector contributes around 3 % to the country’s gross domestic product (GDP) but adds 6.2 % to the national greenhouse gas (GHG) load. It accounts for 28.4% of the entire industry sector emissions, which are 23.9% of the country’s total emissions. Being a developing country, India is not obliged to cut its emissions under the Kyoto Protocol to the United Nations Framework Convention on Climate Change (FCCC), but gave voluntary commitment to reduce the emission intensity of its GDP by 20–25 % from the 2005 level by 2020. This paper attempts to find out if the Indian steel sector can help the country in fulfilling this commitment. The sector reduced its CO₂ emissions per ton of steel produced by 58% from 1994 to 2007. The study generates six scenarios for future projections which show that the sector can reduce its emission intensity by 12.5 % to 63 %. But going by the conservative estimates, the sector can reduce emission intensity by 30 % to 53 %. However, actual emissions will go up significantly in every case.     

Estimating the uncertainty of pesticide residue analysis from mango using multi-residue analysis and validation of method

Validation of method was performed for various pesticides on mango matrix involving the processing of sample at ambient and cryogenic conditions. The linearity, limits of detection, repeatability, matrix effect, and recovery were studied as the aspects of method validation. The effect of matrix on recovery was found to be medium (20–50%) and strong (>50%). After correction by matrix-matched calibration curves, the recovery was calculated to be in the range of 80–107% and 80–105% at ambient and cryogenic processing, respectively. The precision estimated for the recovery of pesticides obtained from both solvent- and matrix-matched calibration curves and at both the processing conditions was determined to be >20% except for chlorpyrifos and atrazine. The uncertainty established for the methodology was >20%, which substantiates the efficiency and reliability of methodology used for pesticide residue analysis in mango in this study.     

Aerogels and metal–organic frameworks for environmental remediation and energy production

Environmental pollution and climate change are requiring new methods to clean pollutants and produce sustainable energy. Aerogels and metal organic frameworks are emerging as advanced porous materials with higher functionality, high surface area, high porosity and flexible chemistry. Aerogels are dried gels prepared using the sol–gel procedure, whereas metal organic frameworks are networks of organic ligands and metal ions connected by coordination bonds. Applications of aerogels include the removal of heavy metals, CO₂ capture and reduction, photodegradation of pollutants, air cleanup and water splitting. This article reviews the synthesis and types of aerogels and metal organic frameworks, and the application to pollutant removal, energy production including hydrogen, methane reforming, CO₂ conversion and NOx removal.     

Management of urban solid waste: Vermicomposting a sustainable option

Solid waste management is a worldwide problem and it is becoming more and more complicated day by day due to rise in population, industrialization as well as changes in our life style. Presently most of the waste generated is either disposed of in an open dump in developing countries or in landfills in the developed ones. Landfilling as well as open dumping requires lot of land mass and could also result in several environmental problems. Land application of urban/municipal solid waste (MSW) can be carried out as it is rich in organic matter and contains significant amount of recyclable plant nutrients. The presence of heavy metals and different toxics substances restricts its land use without processing. Vermicomposting of MSW, prior to land application may be a sustainable waste management option, as the vermicast obtained at the end of vermicomposting process is rich in plant nutrients and is devoid of pathogenic organism. Utilization of vermicast produced from urban/municipal solid waste in agriculture will facilitate in growth of countries economy by lowering the consumption of inorganic fertilizer and avoiding land degradation problem. Vermicomposting of urban/MSW can be an excellent practice, as it will be helpful in recycling valuable plant nutrients. This review deals with various aspects of vermicomposting of MSW.     

ZnO-based heterostructures as photocatalysts for hydrogen generation and depollution: a review

Environmental Chemistry Letters - Energy shortage and escalating pollution are major challenges globally. Heterogeneous photocatalysis is one of the most cost-effective methods for producing...     

Evaluation of biogas upgrading technologies and future perspectives: a review

Environmental Science and Pollution Research - Biogas is acknowledged as one of the foremost bioenergy to address the current environmental and energy challenges being faced by the world. Commonly,...