衡阳市区和衡山背景站臭氧浓度变化规律的对比分析

选取衡阳市区和衡山背景站臭氧自动监测数据,分析两地的臭氧污染特征。对空气质量的优良率情况、臭氧作为首要污染物的变化情况、臭氧浓度的日变化特征、典型时段的浓度变化特征、臭氧浓度的月际变化特征和臭氧与PM_(2.5)的关联情况等进行了分析。结果表明,多云及阴雨天气时,衡阳市区的臭氧浓度日变化幅度大于衡山背景站。夏季,衡阳市区和衡山背景站的臭氧浓度的日变化特征规律差异较大,臭氧浓度分布比较分散,前者为典型的单峰形,后者则波动平缓。冬季,日变化幅度不大,但衡阳市区的臭氧浓度明显低于衡山背景站。衡山背景站和衡阳市区的臭氧基本同步变化,但日均值高于衡阳市区。     

The application of system dynamics in different practices of a waste management system

The continuous increase in waste generation warrants global management of waste to reduce the adverse economic, social, and environmental impact of waste while achieving goals for sustainability. The complexity of waste management systems due to different waste management practices renders such systems difficult to analyze. System dynamics (SD) approach aids in conceptualizing and analyzing the structure, interactions, and mode of behavior of the complex systems. The impact of the underlying components can therefore be assessed in an integrated way while the impact of possible policies on the system can be studied to implement appropriate decisions. This review summarizes various applications of SD pertinent to the waste management practices in different countries. Practices may include waste generation, reduction, reuse/recovery, recycling, and disposal. Each study supports regional-demanding targets in environmental, social, and economic scopes such as expanding landfill life span, implementing proper disposal fee, global warming mitigation, energy generation/saving, etc. The interacting variables in the WMS are specifically determined based on the defined problem, ultimate goal, and the type of waste. Generally, population and gross domestic product can increase the waste generation. An increase in waste reduction, source separation, and recycling rate could decrease the environmental impact, but it is not necessarily profitable from an economic perspective. Incentives to separate waste and knowledge about waste management are variables that always have a positive impact on the entire system.

     

武汉地区夏季和秋冬季大气污染的天气概念模型

利用2013～2019年武汉市生态环境局监测数据、L波段雷达探空资料、NCEP/NCAR逐日再分析资料,对夏季和秋冬季武汉地区污染日的大气污染特征、边界层结构、环流形势、物理量场进行研究,建立了武汉地区大气污染的天气概念模型.主要结论如下:(1)武汉市空气质量具有季节性变化特征,大气污染程度四季分布表现为冬＞秋＞春＞夏.夏季首要污染物是臭氧,冬季首要污染物是PM2.5.(2)比较挑选出的夏季清洁日和污染日的气象要素特征,污染日逆温的平均强度约为清洁日的一倍,逆温底高一般在600 m以下,空气质量一般为轻度-中度污染;静风频率(37.1％)明显高于清洁日的静风频率(2.9％);污染日平均风速小(0.8 m/s),边界层内相对湿度较低.同样比较秋冬季两类天气的气象要素特征,污染日逆温底高低、厚度小,不及清洁日的一半,不利于污染物的扩散,易出现重度污染天气.静风频率(20％)高于清洁日的静风频率(7.5％),风速小(1.6 m/s),污染日边界层内呈明显上千下湿的格局.(3)建立了夏季大气污染的天气概念模型,污染日副高偏弱位置偏东,长江流域易少雨干旱;地面我国东部大范围地区处于均压场中,武汉地区为偏东北异常小风,不利于大气污染物的扩散.(4)建立了秋冬季大气污染的天气概念模型,长江流域环流平直少波动,配合地面弱低压的天气形势和较强的逆温使得大气污染物聚集在近地面.蒙古冷高压强度偏弱,使得入侵我国的冷空气强度偏弱;武汉地区为偏北小风,对雾霾的移除和稀释扩散作用差.该研究结论可供大气污染预测预警研究和环境管理部门大气污染的联防联控参考.     

长三角绿色技术创新网络结构特征与优化策略

绿色技术创新作为区域技术创新体系的重要组成部分,是维持区域发展可持续性、增强区域竞争优势的重要驱动力.基于区域一体化的研究视角,通过采集长三角绿色技术专利合作及绿色技术转移数据,运用Gephi复杂网络分析方法,对长三角绿色技术创新网络进行结构分析.结果 表明:(1)长三角绿色技术创新网络发育程度较低,大量城市在绿色技术创新网络中较边缘化;(2)绿色技术创新依赖创新主体间知识互动,地理邻近促进了创新合作行为的产生和知识的扩散;(3)长三角绿色技术创新网络"强-强联系"与"核心-边缘"结构特征明显,绿色技术专利合作网络呈现"一超多强"的多中心格局,绿色技术转让网络呈现单中心格局;(4)区域一体化下,长三角绿色技术创新网络兼具邻近性和等级性特征,不同类型城市参与创新网络应有差异;进而,提出长三角绿色技术创新网络优化策略.创新点在于:建立了区域一体化与技术创新网络的关联,探讨了绿色技术创新的空间组织形式,强调了地理邻近对于绿色技术创新网络的重要性.     

A combined radical and non-radical oxidation processes for efficient degradation of Acid Orange 7 in the homogeneous Cu(II)/PMS system: important role of chloride

Environmental Science and Pollution Research - Trace copper ion (Cu(II)) in water and wastewater can trigger peroxymonosulfate (PMS) activation to oxidize organic compounds, but it only works under...     

Comparison of different sequential extraction procedures for mercury fractionation in polluted soils

Environmental Science and Pollution Research - Three sequential extraction procedures (SEPs), modified Tessier, modified BCR, and CIEMAT, were compared for mercury fractionation in polluted soils....     

Special issue on contamination,remediation and health for pollutants in natural aquatic,soil, sediments and atmospheric environments

Environmental Geochemistry and Health -     

出口中东汽车的设计改善建议

我国汽车出口到中东市场,由于用车环境和用车习惯不同,需要进行一些设计改善。本文通过对科威特的在用汽车进行调查和分析,得到出口中东市场的汽车在变速箱、天窗、座椅和内外饰颜色等配置上的建议,同时结合以往出口经验讨论了出口中东市场可能需要在冷却系统、空调系统、燃油蒸发系统、动力性能和充放电平衡等方面进行的优化。     

Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.