Effects of fly ash addition on physical properties of porous clay-fly ash composites via polymeric replica technique

The porous composites of clay and fly ash have the potential to be used in many fields, such as catalyst support and gas adsorbents. In this study, various ratios of fly ash (1–2) with different percentage of suspension (50–70 wt%) were applied to produce porous clay-fly ash composites via polymeric replica technique. Fabrication process starts by mixing clay and fly ash in distilled water to form slurry. The process is followed by fully immersing polymer sponge in slurry. The excess slurry is then removed through squeezing. Finally, the sponge coated with slurry is sintered at 500 and 1250 °C for 1 h. It is found that the compressive strength of porous composites improves significantly (0.178–1.28 MPa) when the amount of clay-fly ash suspension mixture (50–70 wt%) increases. The compressive strength of porous composites is mainly attributed to the mullite, quartz and amorphous phase formations. These results are supported by X-ray diffraction analysis. On the other hand, increase in the amount of suspension reduces the apparent density (from 2.44 to 2.32 g/cm³) and porosity (from 97 to 85 %). The reduction in apparent density is believed to be caused by the presence of high fly ash content in porous composites. The melted fly ash cenospheres have closed the internal pores and increased density of samples. Higher suspension level not only reduces porosity, but also increases close pores of the porous composites. The results are justified through the observation from the structures of porous clay-fly ash composites.     

Wood Polypropylene (PP) Composites Manufactured by Mango Wood Waste with Virgin or Recycled PP: Mechanical,Morphology, Melt Flow Index and Crystalline Behaviour

Compositions of wood-polypropylene composites (WPCs) are prepared through melt compounding followed by injection moulding. WPCs are formulated for eight compositions with a different weight ratio of wood, virgin or recycled polypropylene and coupling agent. WPCs compositions are compared in terms of Melt Flow Index, Tensile, FESEM images, Flexural and crystallinity index for same operating variable conditions. From the results, recycled polypropylene based WPCs are superior in comparison to virgin polypropylene based WPCs. With the addition of 5 % coupling agent in recycled polypropylene-based composites for 45:50 composition, tensile and flexural values of WPCs are higher in comparison to all composition and neat virgin or recycled polypropylene. This work stands for the utilization of waste wood with recycled plastic for replacement of wood and virgin plastic.     

The fly ash influenced the heavy metal status of the soil and the seeds of sunflower. A case study

In this study, four cultivars of sunflower (Helianthus annuus) were grown in the sandy loam soil, supplemented with graded (v/v) quantity (0, 20, 40, 60, 80, 100%) of the fly ash, released by the combustion of the coal from the thermal power plant. The presence of fly ash in the soil increased its porosity, water holding capacity, pH, E.C., C.E.C., the content of sulphate, carbonate, bicarbonate, chloride, phosphorus, potassium, calcium and various trace elements. However, in the seeds, except Fe, Pb, Mn and Zn, and other heavy metals remained untraced up to 40% of the fly ash, above that their quantity slightly increased but the values are very much under the permissible limits.     

28-homobrassinolide protects chickpea (Cicer arietinum) from cadmium toxicity by stimulating antioxidants

In the present experiment the seeds of Cicer arietinum (L.) cv. Uday were inoculated with specific Rhizobium grown in sandy loam soil and were allowed to grow for 15 days. At this stage, the seedlings were supplied with 0, 50, 100 or 150 microM of cadmium in the form of cadmium chloride and sprayed with 0.01 microM of 28-homobrassinolide (HBL) at 30-day stage. The data indicated that plant fresh and dry mass, number of nodules, their fresh and dry mass, leghemoglobin content, nitrogen and carbohydrate content in the nodules, leaf chlorophyll content, nitrate reductase and carbonic anhydrase activities decreased proportionately with the increasing concentrations of cadmium but the content of proline and the activities of catalase, peroxidase and superoxide dismutase increased. The ill effect, generated by cadmium, was overcome if the stressed plants were sprayed with HBL.     

Estimation of aerosol optical depth in relation to meteorological parameters over eastern and western routes of China Pakistan economic corridor

This study finds out seasonal and monthly variations in Aerosol Optical Depth (AOD) over eastern and western routes of China Pakistan Economic Corridor (CPEC) and the relationship between AOD and meteorological parameters (i.e., temperature, rainfall and wind speed). The Moderate Resolution Imaging Spectroradiometer (MODIS) and Multi-angle Imaging Spectroradiometer (MISR) data was used from the terra satellite for the period of 2000-2016. This study aims to overtake the conventional view of the purpose of using the satellite datasets. This study takes on to the concept that validated satellite data sets rather should be used for the analysis instead of just validation specifically for our study region. Hence, after comparing MODIS AOD with MISR AOD, only MISR AOD dataset is used for further analysis. The results show a decreasing trend of AOD in summer season, a positive relationship between temperature and AOD during winter and spring seasons whereas a positive relationship between wind speed and AOD in winter and spring seasons over eastern and western routes. Periodic analysis of MODIS AOD and MISR AOD depicts May-Aug as the peak period of aerosol concentration over central Pakistan. The inter-annual analysis shows the aerosol trend remained higher during summer season however rainfall shows the washout effect. Eastern route has higher standard deviation and larger values for aerosol prevalence as compared to western route. The trajectory analysis using the HYSPLIT model suggests the bias of air mass trajectory caused deviation in the aerosol trend in the year 2014.     

Restraint use in the Eastern Province of the Kingdom of Saudi Arabia

Objectives: This study set out to examine seat belt and child restraint use in the Dammam Municipality of the Kingdom of Saudi Arabia, based on the premise that an increase in seat belt use would significantly reduce personal injury in traffic crashes. It was expected that local data would help identify intervention strategies necessary to improve seat belt use in the region.

Methods: The research involved 2 methodologies. First, 1,389 face-to-face interviews were conducted with male and female adults in regional shopping plazas regarding their own and their children's restraint use in their vehicles and reasons for these attitudes and beliefs. Second, 2 on-road observation studies of adult and child restraint use were conducted by trained observers. Occupants of approximately 5,000 passenger vehicles were observed while stopped at representative signalized traffic intersections.

Results: The findings showed front seat belt use rates of between 43 and 47% for drivers and 26 to 30% for front seat passengers; rear seat belt use rates were lower. While there seemed to be some knowledge about the purpose and reasons for restraining both adults and children in suitable restraints, this failed to be confirmed in the on-road observations.

Conclusions: Reasons for these rates and findings are discussed fully, and recommendations for improving seat belt use in the Dammam Municipality are included.     

Report: Healthcare waste characterization in Chittagong Medical College Hospital, Bangladesh

Healthcare waste management (HCWM) options are inconsistent in Bangladesh. One of the first critical steps in the process of developing a reliable waste management plan requires a comprehensive understanding of the quantities and characteristics of the waste that needs to be managed. This study took into consideration both the quantity and quality of the generated waste to determine the generation rates and physical properties of healthcare waste (HCW) in Chittagong Medical College Hospital (CMCH) and also to estimate the amount of infectious and non-infectious waste generated in different wards. CMCH, the second largest hospital in Bangladesh, comprises 34 wards, 12 of which were selected randomly. Waste materials were collected from these wards and then segregated and weighed. Waste generation per day was found to be 73.22 kg/ward, 1.28 kg/bed and 0.57 kg/patient. A total of 2490 kg of HCW was produced each day in CMCH (37% being infectious and the rest being non-infectious waste). Infectious waste was 27.07 kg per ward, 0.47 kg per bed and 0.21 kg per patient and the non-infectious waste was 46.15 kg per ward, 0.81 kg per bed and 0.36 kg per patient per day. HCW comprised eight categories of waste materials with vegetable/food waste being the largest component (50.21%) and varied significantly (P < 0.05) among the 12 different wards studied. The greatest amount of HCW was recorded (154 kg) in Orthopaedics followed by 96.66 kg in the Medicine Unit-3 and the smallest amount was recorded in Casualty (8.79 kg). The amount of HCW was positively correlated with the number of occupied beds (rxy = 0.79, P < 0.01). There is no structured form of medical waste treatment in CMCH and most waste materials are dumped in open areas for natural degradation or re-sold by scavengers. It is essential to develop a national policy and implement a comprehensive action plan for HCWM that will provide environmentally sound technological measures to improve HCWM in Bangladesh.     

Antioxidant effect of L-cysteine on sodium-valproate-induced oxidative stress in rat liver: biochemical and ultrastructural approaches

L-Cysteine has protective efficacy in cases of oxidative tissue injury. Sodium valproate is widely used as an anticonvulsant and an antidepressant in spite of hepatotoxicity as side effect. The aim of this study was to evaluate the protective role of L-cysteine in liver toxicity induced by sodium valproate overdose. Release of the hepatic enzymes, aspartate aminotransferase and alanine aminotransferase, and levels of lipid profiles, as well as the oxidative, enzymatic, and non-enzymatic antioxidant were assessed. Liver damage was judged histologically. L-Cysteine decreased the activity of alanine aminotransferase and aspartate aminotransferase, as well as improved the level of lipid profile, increased the enzymatic antioxidant (catalase, superoxide dismutase, glutathione peroxidase and glutathione reductase), and decreased the lipid peroxidation. L-Cysteine administration inhibited liver injury of sodium valproate.     

The development of low cost adsorbents from clay and waste materials: a review

Increased energy consumption due to industrial growth has increased the levels of carbon dioxide (CO₂) emission being released into the atmosphere. CO₂ emission is a type of greenhouse gas which is a major cause of global warming. Since the issue of CO₂ emissions has drawn much attention in recent years, the development of CO₂ capture technology has become a necessity. Although CO₂ adsorbents are still at the early development stage, it has been suggested that CO₂ adsorbents are the most effective technology in controlling CO₂ emissions. Solid adsorbents have great potential as an alternative method to conventional adsorbents in adsorbing CO₂. In this paper, low cost adsorbents including activated carbon, zeolites, mesoporous silica and clays are discussed in terms of adsorbent preparation methods and CO₂ adsorption capacity. The low cost adsorbents are mainly derived from waste materials such as fly ash, steel slag, red mud, bagasses wastes and wood wastes. Besides that, natural resources such as clays have also been applied as low cost CO₂ adsorbents. Surface modifications have also been applied to the low cost adsorbents, including metal ion exchange and amine impregnation to enhance CO₂ adsorption capacity. In the last section, the current status of CO₂ adsorbents is summarized and future trends are discussed briefly to predict the potential materials which can be applied as CO₂ adsorbents.     

Brassinosteroids protect photosynthetic machinery against the cadmium induced oxidative stress in two tomato cultivars

The present study was conducted with an aim to gain better insight of brassinosteroid generated response on the effects of cadmium on photosynthetic machinery and active oxygen metabolism in two tomato cultivars (K-25 and Sarvodya). These tomato cultivars were subjected to graded cadmium levels in soil (0, 3, 6, 9 or 12 mg kg⁻¹ soil) with their foliage being sprayed with 0 or 10⁻⁸ M of 28-homobrassinolide/24-epibrassinolide (HBL/EBL) at 59 d stage. The results suggested that photosynthetic parameters, leaf water potential and activity of several enzymes (nitrate reductase and carbonic anhydrase) decreased significantly in both the cultivars, to a lesser extent in K-25 than Sarvodya with the increasing levels of cadmium in the soil. However, the activity of antioxidant enzymes and proline content increased in response to metal treatment as well as the application of brassinosteroids (HBL/EBL). Overall, exogenous application of brassinosteroids improved the activity of photosynthetic machinery and that of antioxidant defense system in both the cultivars, and also nullified the damaging effect of metal on these parameters.