Identification of dredged sediment-derived soils in the alluvial plains of the Leie and the Upper and Sea Scheldt rivers (Belgium) based on physico-chemical soil properties

An approach was developed to identify surface soils affected by historical dredged sediment disposal in the alluvial plains of the Upper Scheldt, the Sea Scheldt and the Leie river. Dredged sediment-derived soils were identified based on field observations, comparative granulometric analyses and chemical analyses. Criteria developed were based on a comparison between reference data from 102 aerobic soil samples of areas known to be affected by dredged sediment disposal and 104 samples from undisturbed alluvial soils along the studied rivers. A comparative grain size analysis with optical laser diffractometry between the A and C horizon proved useful for the identification of levelled-up sites. The chemical soil characteristics that were most useful in identifying dredged sediment-derived soils were CaCO3, sulfur (S), organic carbon (OC) and phosphorus (P) contents, electrical conductivity (EC), and the C/P and C/S ratios. Criteria for concluding the origin of an investigated soil were specific for the studied area, but the approach presented may provide useful guidelines for developing criteria valid for different regions.     

Characterisation of polycyclic aromatic hydrocarbons in flue gas and residues of a full scale fluidized bed combustor combusting non-hazardous industrial waste

This paper studies the fate of PAHs in full scale incinerators by analysing the concentration of the 16 EPA-PAHs in both the input waste and all the outputs of a full scale Fluidized Bed Combustor (FBC). Of the analysed waste inputs i.e. Waste Water Treatment (WWT) sludge, Refuse Derived Fuel (RDF) and Automotive Shredder Residue (ASR), RDF and ASR were the main PAH sources, with phenanthrene, fluoranthene and pyrene being the most important PAHs. In the flue gas sampled at the stack, naphthalene was the only predominant PAH, indicating that the PAHs in FBC’s combustion gas were newly formed and did not remain from the input waste. Of the other outputs, the boiler and fly ash contained no detectable levels of PAHs, whereas the flue gas cleaning residue contained only low concentrations of naphthalene, probably adsorbed from the flue gas. The PAH fingerprint of the bottom ash corresponded rather well to the PAH fingerprint of the RDF and ASR, indicating that the PAHs in this output, in contrast to the other outputs, were mainly remainders from the PAHs in the waste inputs. A PAH mass balance showed that the total PAH input/output ratio of the FBC ranged from about 100 to about 2600 depending on the waste input composition and the obtained combustion conditions. In all cases, the FBC was clearly a net PAH sink.     

Esterification of sugarcane bagasse by citric acid for Pb2+ adsorption: effect of different chemical pretreatment methods

In this study, different pretreatment strategies of sugarcane bagasse prior to citric acid modification were investigated in terms of Pb²⁺ adsorption capacity. Pretreatment strategies included the use of NaOH, HCl, and C₂H₅OH in various concentrations. In order to fundamentally understand how these pretreatment methods affect the modification of sugarcane bagasse by citric acid as well as the Pb²⁺ adsorption capacity of sugarcane bagasse, three main components of sugarcane bagasse namely cellulose, hemicellulose, and lignin were isolated and esterified by citric acid under the same conditions. ATR-FTIR, XPS, SEM, and an analysis of the number of carboxylic acid groups were used to investigate the physicochemical and chemical properties of the materials. These three components were proved to participate in adsorption and induce the esterification with citric acid. Hence, pretreatment with ethanol and 0.01 M NaOH which could retain cellulose, hemicellulose, and lignin in sugarcane bagasse achieved a high Pb²⁺ adsorption capacity, i.e., 122.4 and 97 mg/g after the esterification with citric acid. In contrast, pretreatment with 0.5 M NaOH and 0.1 M HCl removed lignin and hemicellulose, leading to the lowest value of approximately 45 mg/g for citric acid esterified-pretreated sugarcane bagasse. XPS analysis and number of carboxylic group measurement confirmed the esterification between bagasse and citric acid. To understand the adsorption mechanism of adsorbent, two kinetic models including pseudo-first-order model and pseudo-second-order model were applied. The experimental data were well described by the pseudo-second-order model. The adsorption isotherm data were fitted Langmuir and Freundlich.

     

An in vitro/in vivo screening assay as a sensitive tool to assess endocrine disruptive activity in surface water

Adult male fathead minnow were exposed for 14 or 28-days under flow-through conditions to undiluted filtered water samples from the rivers Meuse and Rhine in the Netherlands. The experiment included two vessels per treatment each containing 10 fish and samples of five fish were taken after 14 and 28 days. Additional groups were exposed to 17alpha-ethinylestradiol (EE2) as a reference and untreated drinking water as a negative control. Major endpoints examined included induction of vitellogenin (VTG) synthesis, VTG mRNA activity, hepato- and gonadosomatic indices (HSI and GSI) and gonadal histology. No significant difference was recorded in body weight or mean GSI values between the various treatments. Only exposure to Meuse water resulted in significantly higher HSI means after 14 days. Histological examination showed no apparent effects on gonadal tissue except for eosinophilic blood plasma in fish exposed to Meuse water or EE2. After 14 and 28 days, elevated VTG and VTG mRNA levels were measured in most livers of the fish exposed to Meuse water, but not in the fish exposed to Rhine water. This was confirmed by measuring estrogenic responses in the in vitro ER CALUX assay. Induction of VTG synthesis proved to be the most sensitive endpoint in the Non Spawning Male Fish Assay for in vivo detection of bio-available estrogenic activity supplementary to a sensitive in vitro assay. The other endpoints examined varied too much and required a higher number of fish or replicates to achieve sufficient power for statistical testing making them less animal friendly.     

Coordinating work in complex organizations

Differentiation, interdependence, and interest conflict between work units were investigated as determinants of managerial selection between coordination strategies. One hundred and four MBA students with managerial experience participated in a simulation in which they were required to select a strategy to manage systematically different relations between work units. Findings reveal a three-way interaction between differentiation, interdependence, and interest conflict affecting the degree of cooperation and centralization of selected strategies. The formalization of such strategies was affected by an interaction between differentiation and interest conflict. Implications for theory and practice are described.     

Solidification/stabilisation of arsenic bearing fly ash from the metallurgical industry. Immobilisation mechanism of arsenic

When a fly ash waste material from a copper refining process containing large amounts of As2O3 is solidified using cement and lime, the arsenic concentration in the leachate can be lowered to ca. 5 mg/l in a saturated solution of Ca(OH)2. It is shown that the decrease of the concentration in the leachate, mainly of As(III), is due to the formation of insoluble CaHAsO3 in the leachate in the presence of Ca(OH)2. This method is compared with a method whereby use is made of oxidation of the waste before solidification to oxidise As(III) to As(V) using H2O2. The arsenic concentration in the leachate of the extraction test of an oxidised S/S sample was lowered to ca. 0.5 mg/l, a factor of 10 below the one for a non-oxidised sample. It is shown that the decrease of the concentration in the leachate mainly of As(V) is due to the formation of insoluble Ca3(AsO4)2 in the presence of Ca(OH)2. Extensive use was made of the speciation program MINTEQA2, to clarify the immobilisation of arsenic.     

Improving eco-efficiency in the steel industry: The ArcelorMittal Gent case

In addition to CO₂ released by the combustion of fossil fuel and leading to climate change, large steelworks emit pollutants that have other environmental impacts. ArcelorMittal Gent, an integrated steelwork producing ca. 5 × 10⁶ tons of steel per year, not only decreased its specific energy consumption and CO₂-emissions, but also reduced the environmental impact of its other emissions. This is illustrated by means of the evolution of 6 partial eco-efficiency indicators for the impact categories acidification, photo-oxidant formation, human toxicity, freshwater aquatic ecotoxicity, eutrophication and water use. The partial eco-efficiency indicators are eco-intensities, defined as the environmental impact in the respective impact category, divided by the amount of liquid steel produced. In the period 1995 – 2005 these indicators decreased by 45, 4, 52, 9, 11 and 33% respectively, whereas the steel production increased by 17%. The net impact of discharges of wastewater is negligible for human toxicity and is negative (concentrations lower than in the canal water used) for freshwater aquatic toxicity and eutrophication. For acidification, human toxicity (only emissions to air) and water use, the decoupling between environmental impact and production was absolute; for photo-oxidant formation, freshwater aquatic ecotoxicity (only emissions to air) and eutrophication, it was relative.     

Assessing the sustainability of forest management: An application of multi-criteria decision analysis to community forests in northern Ethiopia

Continuous deterioration of the natural resource base has become a serious threat to both the ecological systems and economic production in Ethiopia. Many of these problems have been attributed directly or indirectly to the rapid dwindling of the country's forest cover which is associated with unsustainable forest use and management. Closing community woodlands from human and livestock intervention to promote natural regeneration of forests has been one of the environmental restoration strategies pursued in the degraded highland areas of northern Ethiopia. However, local pressure to use reforested community lands for economic benefit has become a major threat to forest sustainability.Using locally identified sets of criteria and indicators for sustainable community forest management, this paper applies a multi-criteria decision analysis tool to evaluate forest management problems in the northern province of Tigray, Ethiopia. Three MCA methods – ranking, pair-wise comparison, and scoring – were used in evaluating the sets of criteria and indicators and alternative forest management scenarios.Results from the study indicate a number of noteworthy points: 1) MCA techniques both for identifying local level sustainability criteria and indicators and evaluating management schemes in a participatory decision environment appear to be effective tools to address local resource management problems; 2) Evaluated against the selected sets of criteria and indicators, the current forest management regime in the study area is not on a sustainable path; 3) Acquainting local people with adequate environmental knowledge and raising local awareness about the long-term consequences of environmental degradation ranked first among the set of sustainability criteria; and 4) In order to harmonize both environmental and economic objectives, the present ‘ecological-biased’ forest management regime needs to be substituted by an appropriate holistic scheme that takes into account stakeholders' multiple preferences and priority rankings.     

Optimising energy recovery and use of chemicals,resources and materials in modern waste-to-energy plants

Due to ongoing developments in the EU waste policy, Waste-to-Energy (WtE) plants are to be optimized beyond current acceptance levels. In this paper, a non-exhaustive overview of advanced technical improvements is presented and illustrated with facts and figures from state-of-the-art combustion plants for municipal solid waste (MSW). Some of the data included originate from regular WtE plant operation – before and after optimisation – as well as from defined plant-scale research. Aspects of energy efficiency and (re-)use of chemicals, resources and materials are discussed and support, in light of best available techniques (BAT), the idea that WtE plant performance still can be improved significantly, without direct need for expensive techniques, tools or re-design. In first instance, diagnostic skills and a thorough understanding of processes and operations allow for reclaiming the silent optimisation potential.