Eco-efficiency trends of the Flemish industry: decoupling of environmental impact from economic growth

A methodology for eco-efficiency reporting is proposed with eco-efficiency indicators for climate change, acidification, photo-oxidant formation, human toxicity, freshwater aquatic ecotoxicity, eutrophication, energy consumption and waste generation. The method is applied to emission, consumption and production data of the Flemish industry provided by the Flemish environmental agency for the period 1995–2006. For climate change, acidification, photo-oxidant formation, human toxicity, freshwater aquatic ecotoxicity and eutrophication, the eco-efficiency improved by 39, 55, 41, 58, 72 and 53%, respectively. For each of these impact categories, the total environmental impact decreased despite an increase in production, indicating absolute decoupling of environmental impact from economic growth. The eco-efficiency indicator for energy consumption and waste generation improved by 16 and 14%, respectively. However, due to the increase in production, the total energy consumption and the amount of waste generated increased: for these two environmental themes decoupling from economic growth was relative. Despite the improved eco-efficiency, industry remains one of the main polluters in Flanders. The application of the method to emission, energy consumption and production data of the Flemish industry resulted in a comprehensive and correct source of information for the general public and the government. Moreover, it can serve as a basis for economically and environmentally sound decisions and for the evaluation of the impact of former decisions.     

Environmental performance comparison of wet and thermal routes for phosphate fertilizer production using LCA – A Brazilian experience

Life cycle assessment (LCA) was applied to perform an environmental comparison between the phosphate fertilizers fused magnesium phosphate (FMP) and triple superphosphate (TSP). In order to perform the comparison a functional unit (FU) of 41.66 kg P₂O₅, which corresponds to 208 kg FMP (20% P₂O₅) and 93 kg TSP (45% P₂O₅) was defined. Concerning the product systems a “cradle to gate” approach was used in both cases. In order to perform the life cycle impact assessment (LCIA) the impact categories: global warming potential (GWP), ozone depletion potential (ODP), human toxicity potential (HTP), fresh water aquatic ecotoxicity potential (FWAETP), acidification potential (AP) and eutrophication potential (EP) were selected. The development of this step was accomplished using CML 2 baseline 2000 method, with the help of the computational tool SimaPro 5, version 5.1.0.21. The study identified that in the case of FMP, the extensive electricity dependence is the main source of potential negative environmental impacts. On the other hand, for the TSP, the great distances between the phosphate rock mines and the main manufacture centers for both H₃PO₄ and TSP together with the transportation model adopted in this country appear as the main causes of environmental impacts.     

LCA of spent fluorescent lamps in Thailand at various rates of recycling

This paper presents environmental impact of a fluorescent lamp (a long straight tube 36 watts, 200 g and 13,600 h for mean time before failure) when considering different disposal methods (recycle and non-recycle) of its spent fluorescent lamp (SFL). The study was applied for the case in Thailand using life cycle assessment (LCA) as a tool. All materials, energy use, and pollutant emissions to the environment from each related process were identified and analyzed. Impact assessment was conducted for 10 environmental impact potentials: carcinogens, respiratory organics, respiratory inorganics, climate change, radiation, ozone layer, ecotoxicity, acidification/eutrophication, land use and minerals. The analysis followed Eco-Indicator 99 method, individualist version 2.1. The main focus of the study was to compare the impact of SFL recycling with non-recycling before landfilling. The impact intermittent activities, production of raw material and energy used in all the concerned processes were taken into account. However, transportation activities were excluded. The results showed that for all recycling rates, cement production is the main contributor to the environmental impacts, while sodium sulfide production is second and electrical production, the third. Mercury vapor emission showed a small contribution in carcinogens and ecotoxicity. The impacts are reduced when recycling rate is increased. The reduction of cement consumption in disposal processes or the process improvement of cement production may also help to reduce environmental impacts.     

基于生命周期的循环农业系统评价

针对"循环经济系统是低碳经济的实现途径之一"的观点,在国内外研究的基础上,改进LCA模型,以湖南某典型的循环鸭业产业进行实证研究.整个鸭产业生命周期中耗用的不可再生资源、土地、水资源分别为48.629MJ、2.36m2和1321.41kg,潜在的温室气体、环境酸化、富营养化、人体毒性、水体毒性、土壤毒性分别为11543.26g(CO2eq)、52.36g(SO2eq)、25.83g(PO4eq)、1.26、60.74、24.65g(1,4-DCBeq),加权评估后,富营养化、水体毒性、土壤毒性潜在威胁均高于温室气体.结果表明,建立在传统生产模式上的循环农业适宜"适度循环";循环农业不能盲目追求低碳发展,在降低碳排放的同时还须考虑土壤和生物固碳,才能全面评价碳排放问题;循环经济和循环农业在评估碳排放的同时,还需对环境酸化、富营养化、生态毒性等其他生态指标进行评估,建立系统评价体系;LCA能够较好地对循环农业进行整体评价,值得进一步研究.     

Environmental consequences of different beef production systems in the EU

The aim of this paper is to examine the environmental consequences of beef meat production in the EU, using a life cycle approach. Four beef production systems were studied – three from intensively reared dairy calves and one from suckler herds. According to the results of the analysis, the contributions from the production of 1 kg beef meat (slaughter weight) to global warming, acidification, eutrophication, land use and non-renewable energy use were lower for beef from dairy calves than from suckler herds (16.0–19.9 versus 27.3 kg CO₂e, 101–173 versus 210 g SO₂e, 622–1140 versus 1651 g NO₃e, 16.5–22.7 versus 42.9 m²year, and 41.3–48.2 versus 59.2 MJ, respectively). The breakdown analysis helped identify the key areas in the “cradle to farm gate” beef production system where sustainable management strategies are needed to improve environmental performance. The study also included a sensitivity analysis to preliminarily estimate GHG emissions from beef production systems if land opportunity cost and land use change related to grazing and feed crop production for beef were taken into account. If so, the contribution from the production of 1 kg beef to global warming would increase by a factor of 3.1–3.9, based on a depreciation period of 20 years. This highlights the importance of taking into account the impacts of land use in assessing the environmental impacts of livestock production.     

设施番茄生产系统的环境影响生命周期评价

应用生命周期评价方法,以陕西省西安市郊区为例,对设施番茄生产系统进行了环境影响评价.结果表明,日光温室和塑料大棚生产1000kg番茄消耗的能源和水资源分别是1740.58 MJ、50.767 m3和1502.346 MJ、53.734 m3;全球变暖潜值(以CO2当量计)、环境酸化潜值(以SO2当量计)、富营养化潜值(以PO3-4当量计)、光化学烟雾潜值(以C2H2当量计)、土壤毒性(以1,4-DCB当量计)、水体毒性(以1,4-DCB当量计)和人类毒性潜值(以1,4-DCB计)分别为271.943 kg、2.151 kg、0.247 kg、0.157 kg、24.217 kg、19.545 kg、0.124 kg和239.163 kg、1.88 kg、0.305 kg、0.109 kg、31.686 kg、19.7 kg、0.304 kg.设施构筑物自身建设和维护带来的主要潜在环境影响是能源耗竭、全球变暖和环境酸化;番茄种植环节引起的主要潜在环境影响是水资源耗竭、富营养化、全球变暖、土壤毒性和水体毒性;农资生产环节的主要潜在环境影响是能源耗竭.设施番茄生产系统中对环境影响大的建材和农资是钢材、聚乙烯材料、氮肥、农药和含过量重金属的有机肥.设施番茄生产系统对环境的影响不容忽视,应展开以降低其环境影响为目标的设施结构与建材、温室内气候条件调控、合理施肥和施药的研究,并对采取的技术方法进行生命周期评价,以确保设施蔬菜的可持续发展.研究结果可为促进设施蔬菜生产系统的可持续发展提供科学依据.     

Life cycle assessment of sub-units composing a MSW management system

This paper summarises the results of a number of life cycle evaluations that we have carried out in recent years about some of the sub-units (in particular, the recycling of the packaging materials, the treatment of the bio-waste, and the energy recovery from the residual waste) that compose a municipal solid waste management system (MSWMS) and about the MSWMS as a whole.The range of values estimated for cumulative energy demand (CED), global warming (GWP₁₀₀), human toxicity, acidification, and photochemical ozone creation indicators according to the different analyses are presented in the paper for each sub-unit. The assumptions influencing the results have been identified, too. The proper aggregation of sub-units has allowed the estimation of the impacts associated with two integrated MSWMSs implemented in Italy and of the order of magnitude of those associated with a generic MSWMS, similar to those of the two case studies.The results show that the assumptions that most influence the environmental indicators are those about selection efficiencies and quality deterioration in the recycling of the packaging materials, about process emissions and avoided products in the composting, about the biogas yield and its way of utilisation in the anaerobic digestion, and about the efficiency of the plant and the kind of avoided energy in the energy recovery. All the indicators, except GWP₁₀₀ under certain assumptions, are negative in sign, thus indicating a benefit for the environment thanks to the avoided impact associated with the production of material and energy during the waste management. The estimated order of magnitude of the CED and GWP₁₀₀ indicators turns out to be respectively thousands of MJ eq. and tens of kg CO₂ eq. per tonne of managed waste.     

Disaggregated greenhouse gas emission inventories from agriculture via a coupled economic-ecosystem model

Estimates of regional greenhouse gas emissions from agricultural systems are needed to evaluate possible mitigation strategies with respect to environmental effectiveness and economic feasibility. Therefore, in this study, we used the GIS-coupled economic-ecosystem model EFEM–DNDC to assess disaggregated regional greenhouse gas (GHG) emissions from typical livestock and crop production systems in the federal state of Baden-Württemberg, Southwest Germany. EFEM is an economic farm production model based on linear programming of typical agricultural production systems and simulates all relevant farm management processes and GHG emissions. DNDC is a process-oriented ecosystem model that describes the complete biogeochemical C and N cycle of agricultural soils, including all trace gases.Direct soil emissions were mainly related to N₂O, whereas CH₄ uptake had marginal influence (net soil C uptake or release was not considered). The simulated N₂O emissions appeared to be highly correlated to N fertilizer application (R² = 0.79). The emission factor for Baden-Württemberg was 0.97% of the applied N after excluding background emissions.Analysis of the production systems showed that total GHG emissions from crop based production systems were considerably lower (2.6–3.4 Mg CO₂ eq ha⁻¹) than from livestock based systems (5.2–5.3 Mg CO₂ eq ha⁻¹). Average production system GHG emissions for Baden-Württemberg were 4.5 Mg CO₂ eq ha⁻¹. Of the total 38% were derived from N₂O (direct and indirect soil emissions, and manure storage), 40% were from CH₄ (enteric fermentation and manure storage), and 22% were from CO₂ (mainly fertilizer production, gasoline, heating, and additional feed). The stocking rate was highly correlated (R² = 0.85) to the total production system GHG emissions and appears to be a useful indicator of regional emission levels.     

Methane,nitrous oxide and ammonia emissions during storage and after application of dairy cattle slurry and influence of slurry treatment

Slurries are a significant source of CH₄, NH₃ and N₂O emissions to the atmosphere. The research project aimed at quantifying CH₄, NH₃ and N₂O emissions from liquid manure stores and after manure application under field conditions. The influence of the manure treatment options “no treatment”, “slurry separation”, “anaerobic digestion”, “slurry aeration” and “straw cover” on the emission level was investigated. Approximately 10 m³ of differently treated slurry were stored in pilot scale slurry tanks. Emissions were followed for c. 80 days. After the storage period, slurries were applied to permanent grassland. Greenhouse gas emissions from slurry were mainly caused by methane emissions during storage and by nitrous oxide emissions after field application of manures. Mitigation of GHG emissions can be achieved by a reduction in slurry dry matter and easily degradable organic matter content. Ammonia emissions mainly occurred after field application. Untreated slurry emitted 226.8 g NH₃ m⁻³ and 92.4 kg CO₂ eq. m⁻³ (storage and field application). Slurry separation (liquid fraction and composting of the solid fraction) resulted in NH₃ losses of 402.9 g m⁻³ and GHG losses of 58.5 kg CO₂ eq. m⁻³. Anaerobic digestion was a very effective means to reduce GHG emissions. 37.9 kg CO₂ eq. m⁻³ were lost. NH₃ emissions were similar to those from untreated slurry. Covering the slurry store with a layer of chopped straw instead of a wooden cover increased NH₃ emissions to 320.4 g m⁻³ and GHG emissions to 119.7 kg CO₂ eq. m⁻³. Slurry aeration nearly doubled NH₃ emissions compared to untreated slurry. GHG emissions were reduced to 53.3 kg CO₂ eq. m⁻³.     

Environmental impact of cement production: detail of the different processes and cement plant variability evaluation

This study evaluates the environmental impact of the cement production and its variations between different cement plants, using Life Cycle Impact Assessment. For that purpose, details of the cement production processes are investigated in order to show the respective part of raw materials preparation and clinker production using environmental impacts calculated with CML01 indicators. For the kiln emission data, a European pollutant emission register for French intensive industries is used to quantify the variability of indicators between cement plants. For the CML01 indicators that are controlled by kiln emissions, some of them (i.e. global warming, photochemical oxidation) show variations between cement plants between 20 and 30%, as for other (i.e. acidification, eutrophication, terrestrial ecotoxicity) variations are greater than 40% due to the lack of accurate measurements on both pollutant content and annual flow. Finally, a normalisation, using Western Europe yearly emissions is performed and permits to highlight among all the CML01 indicators which ones are the main impacts for the cement production. Abiotic depletion, global warming, acidification and marine ecotoxicity are the four identified impacts.     

不同施肥模式下甘薯乙醇生命周期能效与环境影响分析

采用生命周期分析方法,以1 000 L甘薯乙醇为单位功能单元,将甘薯乙醇生产体系分成作物种植、原料运输和乙醇转换等3个单元,对其生命周期能耗与环境排放进行清单分析和影响评价,比较习惯施肥与测土配方施肥下甘薯乙醇生命周期9类环境影响潜力的差异。结果表明：两种施肥模式下甘薯乙醇生产体系的生命周期能源效率分别为1.41和1.43。习惯施肥模式下甘薯乙醇生命周期主要环境影响类型包括人体毒性、富营养化、酸化、淡水生态毒性、能耗和全球变暖,其环境影响潜力分别相当于2000年世界人均影响潜力的40%、40%、31%、29%、25%和20%。测土配方施肥降低了化学氮肥和磷肥使用量,提高了肥料利用效率和甘薯单产,使富营养化、淡水生态毒性、酸化和全球变暖潜力分别降低了31%、15%、9%和7%。可见,测土配方施肥模式可改善甘薯乙醇生命周期的能源效率并显著缓解其负面环境影响。     

Material flows in the life cycle of leather

This paper presents a study on the resource and environmental profile of leather for communicating to the consumers about the environmental burdens of leather products. The results indicate that significant environmental impacts were caused during the tanning and finishing of leather as well as the electricity production and transportation required in the life cycle. The use of fossil fuels in the production of energy has greater impact with increased emissions leading to about 15190 kg CO₂ equivalent of global warming and about 73 kg SO₂ equivalent of acidification while producing 100 m² of leather for shoe uppers. Further resource use of 174 kg of coal, 6.5 kg of fuel oil, 17.4 m³ of water and 348 kg of chemicals of which about 204 kg are hazardous are consumed, and wastewater of about 17 m³, BOD of 55 kg, COD of about 146 kg, TDS of 732 kg and solid waste of about 1445 kg are generated during the life cycle for the production of 100 m² of leather. The total solid waste generated is 1317 kg, out of which about 80% is biodegradable contributed by slaughtering, tanning and finishing stage, 14% is non-biodegradable contributed by tanning, finishing and electricity production stages and 6% is hazardous mainly from tanning and finishing stage of leather.     

Modeling increased demand of energy for air conditioners and consequent CO2 emissions to minimize health risks due to climate change in India

Developing countries situated mostly in latitudes that are projected for the highest climate change impact in the twenty-first century will also have a predictable increase in demand on energy sources. India presents us with a unique opportunity to study this phenomenon in a large developing country. This study finds that climate adaptation policies of India should consider the significance of air conditioners (A/Cs) in mitigation of human vulnerability due to unpredictable weather events such as heat waves. However, the energy demand due to air conditioning usage alone will be in the range of an extra ～750,000 GWh to ～1,350,000 GWh with a 3.7 °C increase in surface temperatures under different population scenarios and increasing incomes by the year 2100. We project that residential A/C usage by 2100 will result in CO₂ emissions of 592 Tg to 1064 Tg. This is significant given that India's total contribution to global CO₂ emissions in 2009 was measured at 1670 Tg and country's residential and commercial electricity consumption in 2007 was estimated at 145,000 GWh.     

Carbon footprint of sugar produced from sugarcane in eastern Thailand

Carbon footprint (CFP) of sugar produced from sugarcane in eastern Thailand was estimated from greenhouse gas emissions (CO₂, CH₄, and N₂O) during the sugarcane cultivation and milling process. The use of fossil fuels, chemical and organic fertilizer and sugarcane biomass data during cultivation were collected from field surveys, questionnaires and interviews. Sugar mill emissions, fossil fuel utilization and greenhouse gas emission from wastewater treatments were included. The results show that sugar production has a carbon footprint of 0.55 kg CO₂e kg^?1 sugar. This carbon footprint was a sum of 0.49 kg CO₂e kg^?1 sugar from sugarcane cultivation and 0.06 kg CO₂e kg^?1 sugar from the milling process. For the cultivation part, most of the GHGs emissions were from fertilizer, fossil fuel use and biomass burning. The CFP in eastern Thailand is sensitive to the type of data selected for calculation and of variations of farm inputs during sugarcane cultivation. There was no significant difference of CFP among farm sizes, although small farms tended to give a relatively higher CFP than that of medium and large farms.     

Balancing of greenhouse gas emissions and economic efficiency for biogas-production through anaerobic co-fermentation of slurry with organic waste

Using the organic fraction of municipal solid waste (OFMSW) for biogas production might contribute to greenhouse gas mitigation, but emissions linked with biogas production can reduce these beneficial effects. Therefore the emissions of NH₃, CH₄ and N₂O and costs caused by treating OFMSW by co-fermentation with slurry were calculated in detail from literature data, and strategies for reducing emissions were evaluated. Emission factors were calculated for single gases during storage and after application. The sensitivity of the calculations concerning the organic dry matter content of OFMSW, retention time and CH₄-yield was analyzed. The anaerobic co-fermentation of OFMSW increased biogas yields and contributed to the reduction of CO₂ emissions with 32 to 152 kg CO₂ t⁻¹ organic waste depending on application and storage techniques used for the fermentation residues. Considering a payment of 0.1 €/kWh for the electricity produced, the costs for utilization of OFMSW in slurry based biogas plants were calculated to range between 34 and 38 € t⁻¹. Measures for mitigating greenhouse gas emissions by covering the fermentation residue stores proved to be more cost effective with 3–31 € t⁻¹ CO₂ compared to immediate harrowing or injecting the residues during field application.     

The CO2 abatement cost curve for the Thailand cement industry

The cement industry is one of the largest carbon dioxide (CO₂) emitters in the Thai industry. The cement sector accounted for about 20,633 kilotonnes (ktonnes) CO₂ emissions in 2005 in Thailand. A bottom-up CO₂ abatement cost curve (ACC) is constructed in this study for the Thai cement industry to determine the potentials and costs of CO₂ abatement, taking into account the costs and CO₂ abatement of different technologies. The period of 2010–2025 is chosen as the scenario period. We analyzed 41 CO₂ abatement technologies and measures for the cement industry. Using the bottom-up CO₂ ACC model, the cost-effective annual CO₂ abatement potential for the Thai cement industry during the 15 year scenario period (2010–2025) is equal to 3095 ktonnes CO₂/year. This is about 15% of the Thai cement industry’s total CO₂ emissions in 2005. The total technical annual CO₂ abatement potential is 3143 ktonnes CO₂/year, which is about 15.2% of the Thai cement industry’s total CO₂ emissions in 2005. We also conducted a sensitivity analysis for the discount rate parameter.     

Integrated environmental assessment of biodiesel production from soybean in Brazil

This paper presents the results of an environmental impact assessment of biodiesel production from soybean in Brazil. In order to achieve this objective, environmental impact indicators provided by Emergy Accounting (EA), Embodied Energy Analysis (EEA) and Material Flow Accounting (MFA) were used. The results showed that for one liter of biodiesel 8.8 kg of topsoil are lost in erosion, besides the cost of 0.2 kg of fertilizers, about 5.2 m² of crop area, 7.33 kg of abiotic materials, 9.0 tons of water and 0.66 kg of air and about 0.86 kg of CO₂ were released. About 0.27 kg of crude oil equivalent is required as inputs to produce one liter of biodiesel, which means an energy return of 2.48 J of biodiesel per Joule of fossil fuel invested. The transformity of biodiesel (3.90E + 05 seJ J^?1) is higher than those calculated for fossil fuels as other biofuels, indicating a higher demand for direct and indirect environmental support. Similarly, the biodiesel emergy yield ratio (1.62) indicates that a very low net emergy is delivered to consumers, compared to alternatives. Obtained results show that when crop production and industrial conversion to fuel are supported by fossil fuels in the form of chemicals, goods, and process energy, the fraction of fuel that can actually be considered renewable is very low (around 31%).     

The impact of Swedish SO2 policy instruments on SO2 emissions 1990–2012

Sulphur dioxide (SO₂) emissions cause acidification and human health problems which are, despite present policy instruments, projected to remain even after 2030 in Europe. Additional instruments are needed to solve the problems, and impact analysis of already used policy instruments would contribute to the development of new effective instruments. We present a study on how much of the decoupling of SO₂ emissions from economic growth 1990–2012 that was due to SO₂ policy instruments in general and to what extent it is possible to estimate the impact of individual instruments. Focus is on Sweden, a country with problems reaching its SO₂-related environmental policy targets and with detailed data available.We applied decomposition analysis combined with an analysis of the chronological development of emission factors and mandated emission limits. Our use of official emission inventory data and publicly available data on the development of SO₂ policy instruments increase the usefulness of our results to policy makers.The results indicate that at least 26–27% (corresponding to ∼35–36 ktonne annually) of the decoupling 1990–2012 was due to SO₂ policy instruments. 4–5% (∼6–7 ktonne) of the decoupling was caused by one environmental permit decision and stricter sulphur emission limit for marine oils. Most of the total impact of SO₂ policy instruments could not be causally connected to an individual instrument, because many events and developments overlap in time.The implications of the results are that: a) SO₂ policy instruments should still be important to reduce SO₂ emissions in many countries; b) a lower boundary total emission impact of SO₂ policy instruments can be estimated, but with current knowledge and data the impacts of individual instruments are rarely possible to estimate. Research on how to increase the precision in total impact estimates of SO₂ policy instruments is needed to improve future impact analyses. More detailed emission inventory data would improve impact analysis of individual instruments.     

Life-cycle environmental and economic impacts of energy-crop fuel-chains: an integrated assessment of potential GHG avoidance in Ireland

This paper combines life-cycle analyses and economic analyses for Miscanthus and willow heat and electricity fuel-chains in Ireland. Displaced agricultural land-uses and conventional fuels were considered in fuel-chain permutations. Avoided greenhouse gas (GHG) emissions ranged from 7.7 to 35.2 t CO₂ eq. ha⁻¹ a⁻¹. Most fuel-chain permutations exhibited positive discounted financial returns, despite losses for particular entities at a farm-gate processed-biomass price of €100 t⁻¹ dry-matter. Attributing a value of €10 t⁻¹ CO₂ eq. to avoided GHG emissions, but subtracting financial returns associated with displaced fuel supplies, resulted in discounted annual national economic benefits (DANEBs) ranging from −457 to 1887€ ha⁻¹ a⁻¹. Extrapolating a plausible combination of fuel-chains up to a national indicative scenario resulted in GHG emission avoidance of 3.56 Mt CO₂ eq. a⁻¹ (5.2% of national emissions), a DANEB of 167 M€, and required 4.6% of national agricultural land area. As cost-effective national GHG avoidance options, Miscanthus and willow fuel-chains are robust to variation in yields and CO₂ price, and appear to represent an efficient land-use option (e.g. compared with liquid biofuel production). Policies promoting utilisation of these energy-crops could avoid unnecessary, and environmentally questionable, future purchase of carbon credits, as currently required for national Kyoto compliance.     

Life cycle greenhouse gases,energy and cost assessment of automobiles using magnesium from Chinese Pidgeon process

Magnesium (Mg) has a great potential to reduce vehicle weight, fuel consumption, and greenhouse gas emissions. The Chinese Mg industry has developed rapidly since the 1990s. The output of Mg reached 700,000 tons in 2006, accounting for more than 70% of global Mg production. Most of Mg is produced in China through the Pidgeon process that has an intensive energy usage and generates a large amount of greenhouse gas (GHG) emissions, which may offset the potential advantage of using Mg parts in automobiles. It is critical to quantify the energy usage and GHG emissions through entire life cycle when the Mg are applied to automobiles. It is also essential to evaluate cost implications of the Mg parts application in automobiles and ensure it to be cost competitive. The objectives of this study are (1) Build a life cycle inventory (LCI) of Mg produced by Pidgeon process; (2) Establish an LCA model that can evaluate GHG emissions and energy usage for the Mg automotive application; (3) Estimate the cost implications of the Mg parts application in automobiles.An Mg LCI was built based on interviews and surveys and the GREET model was adapt for this study. The results indicated that, for each kilogram of Mg produced by Pidgeon process, GHG emissions and energy usage would be 27 kg CO₂eq and 280 MJ, which are five times higher than steel production. Replacing steel with 82 kg Mg on a base automobile would lower curb weight by 5.7%, but only reduce life cycle GHG emissions and energy usage by 0.8% and 1.3%. Scenario analyses indicated that potential reduction of life cycle GHG emissions and energy usage could reach to 15%, if secondary weight saving and a smaller engine were included. Cost analyses also show 18% reduction when the additional weight saving and a smaller displacement engine were included, under a 100,000 km driving distance and gasoline price at $1.0/l.