Influence of soil properties and aging on the toxicity of copper on compost worm and barley

Influence of soil properties and aging on Cu partitioning and toxicity was assessed on 10 artificial soils constituted using a statistical design considering pH (5.5 and 7.5), organic matter (1-30% [w/w]), and clay content (5-35% [w/w]). Total Cu as well as water-, CaCl2-, and diethylene triamine pentaacetic acid (DTPA)-extracted Cu fractions were determined for each soil mixture. Ecotoxic effect was assessed by determining growth inhibition of barley (Hordeum vulgare L.) and compost worm (Eisenia fetida) mortality. Analyses were repeated after a 16-wk aging period of the soils at pH 7.5 (8 x 2-wk wetting and drying cycle). Results indicated that pH was the main factor controlling Cu partitioning, ahead of organic matter and clay content. Calcium chloride (0.5 M)-extracted Cu fractions showed the best correlation with toxic responses (r = 0.55-0.66; p < 0.05), while total and DTPA-extracted Cu concentrations could not explain differences in toxicity. Direct regressions between toxicity and soil properties (pH, organic matter, and clay content) provided better explanation of variance: r2= 0.50 (p = 0.00006) for compost worm mortality, r2= 0.77 (p < 0.00001) for barley shoot inhibition, and r2= 0.92 (p < 0.00001) for barley root inhibition. Copper toxicity was mainly influenced by pH and, to a lesser extent, by organic matter and clay content. Aging in organic soils revealed a slight reduction in ecotoxicity while an increase was observed in soils with low organic matter content. Further investigation using longer aging periods would be necessary to assess the significance of this observation.     

Classification of different sustainable flood retention basin types

Using a revised version of a previously published expert classification system, a database of potential Sustainable Flood Retention Basins has been developed for Scotland. The research shows that the majority of small and former (often old) drinking water reservoirs are kept full and their spillways are continuously in operation. Utilising some of the available capacity to contribute to flood control could significantly reduce the costs of complying with the European Union Flood Directive. Furthermore, the application of a previously developed classification model for Baden in Germany for the Scottish data set showed a lower diversity for basins in Scotland due to less developed infrastructure. The classification system appears to be robust and has the potential, with minor modifications, to be applied across Europe. The principle value of this approach is a clear and unambiguous categorisation, based on standard variables, which can help to promote communication and understanding between stakeholders.     

Post‐crisis analysis of an ineffective tsunami alert: the 2010 earthquake in Maule,Chile

Considering its huge magnitude and its location in a densely populated area of Chile, the Maule seism of 27 February 2010 generated a low amount of victims. However, post‐seismic tsunamis were particularly devastating on that day; surprisingly, no full alert was launched, not at the national, regional or local level. This earthquake and associated tsunamis are of interest in the context of natural hazards management as well as crisis management planning. Instead of focusing exclusively on the event itself, this article places emphasis on the process, systems and long‐term approach that led the tsunami alert mechanism to be ineffectual. Notably, this perspective reveals interrelated forerunner signs of vulnerability.     

The impact of the 12 May 2008 Wenchuan earthquake on industrial facilities

This study describes the results of a field trip to the area affected by the 12 May, 2008, Wenchuan earthquake to analyse its impact on industrial facilities. The damage severity correlates well with the age of the plant, with older facilities having suffered more extensive and severe damage than those built more recently according to the latest design codes. The main cause of worker death and injury was the collapse of warehouses, office and manufacturing buildings. This concerned mostly concrete structures with insufficient confinement or poor reinforcement. The falling debris resulted in equipment damage and loss, as well as pipe severing and crushing. Pipes were also severed or bent when connected tanks were displaced or buildings collapsed. Numerous hazardous-materials releases occurred with spills being the dominant accident scenario. In some sites soil–liquefaction induced damage was evident, highlighting the need to consider potential site effects when selecting the location for a facility. The impact of the Wenchuan earthquake on chemical facilities confirms the findings from other earthquakes in terms of typical Natech damage and failure modes, as well as of hazardous-materials release potential and mechanisms.     

Performance evaluation of phycocyanin probes for the monitoring of cyanobacteria

The performance of two field probes (YSI 6600 and TriOS), used for the measurement of in vivo phycocyanin fluorescence, was compared and validated in the laboratory in 2008 and 2009 with cultures of Microcystis aeruginosa and field samples. The background noise of the two probes was low and the detection limits were estimated at 1500 cells mL(-1) for the YSI and 0.69 μg PC L(-1) for the TriOS. The linearity and repeatability of both probes have been excellent. Strong relationships were observed between the in vivo fluorescence and the total cyanobacterial biovolume (R(2) = 0.82 YSI; 0.83 TriOS) or the abundance (R(2) = 0.71 YSI; 0.75 TriOS) of cyanobacteria. However, the difference between cell densities determined by microscopy and measured by the YSI can be very large and has been associated to the variability of cell volume among cyanobacteria. This last observation makes the YSI a qualitative tool if a post-calibration is not done. The analysis of filtrated samples showed that dissolved phycocyanin (extracellular) may represent a significant fluorescence signal. No relationship could be established between the abundance, the total cyanobacterial biovolume or the in vivo fluorescence of phycocyanin and the concentrations of cyanotoxins (R(2) ≤ 0.22).     

Sediment processes and flow reversal in the undular tidal bore of the Garonne River (France)

A tidal bore is a series of waves propagating upstream as the tidal flow turns to rising, and the bore front corresponds to the leading edge of the tidal wave in a funnel shaped estuarine zone with macro-tidal conditions. Some field observations were conducted in the tidal bore of the Garonne River on 7 June 2012 in the Arcins channel, a few weeks after a major flood. The tidal bore was a flat undular bore with a Froude number close to unity: $\hbox {Fr}_{1} = 1.02$ and 1.19 (morning and afternoon respectively). A key feature of the study was the simultaneous recording of the water elevation, instantaneous velocity components and suspended sediment concentration (SSC) estimates, together with a detailed characterisation of the sediment bed materials. The sediment was some silty material ( $\hbox {d}_{50} \approx 13~\upmu \hbox {m}$ ) which exhibited some non-Newtonion thixotropic behaviour. The velocity and SSC estimate were recorded simultaneously at high frequency, enabling a quantitative estimate of the suspended sediment flux at the end of the ebb tide and during the early flood tide. The net sediment flux per unit area was directed upstream after the bore, and its magnitude was much larger than that at end of ebb tide. The field observations highlighted a number of unusual features on the morning of 7 June 2012. These included (a) a slight rise in water elevation starting about 70 s prior to the front, (b) a delayed flow reversal about 50 s after the bore front, (c) some large fluctuations in suspended sediment concentration (SSC) about 100 s after the bore front and (d) a transient water elevation lowering about 10 min after the bore front passage. The measurements of water temperature and salinity showed nearly identical results before and after the tidal bore, with no evidence of saline and thermal front during the study.     

Classification of di erent sustainable flood retention basin types

Using a revised version of a previously published expert classification system, a database of potential Sustainable Flood Retention Basins has been developed for Scotland. The research shows that the majority of small and former (often old) drinking water reservoirs are kept full and their spillways are continuously in operation. Utilising some of the available capacity to contribute to flood control could significantly reduce the costs of complying with the European Union Flood Directive. Furthermore, the application of a previously developed classification model for Baden in Germany for the Scottish data set showed a lower diversity for basins in Scotland due to less developed infrastructure. The classification system appears to be robust and has the potential, with minor modifications, to be applied across Europe. The principle value of this approach is a clear and unambiguous categorisation, based on standard variables, which can help to promote communication and understanding between stakeholders.