Treatment technologies for PAH-contaminated sites: a critical review

To reduce environmental and human health risks of contaminated sites, having a comprehensive knowledge about the polycyclic aromatic hydrocarbon (PAH) removal processes is crucial. PAHs are contaminants which are highly recognized to pose threats to humans, animals, and plants. PAHs are hydrophobic and own two or more benzene rings, and hence are resistant to structural degradation. There are various techniques which have been developed to treat PAH-contaminated soil. Four distinct processes to remove PAHs in the contaminated soil, thought to be more effective techniques, are presented in this review: soil washing, chemical oxidation, electrokinetic, phytoremediation. In a surfactant-aided washing process, a removal rate of 90% was reported. Compost-amended phytoremediation treatment presented 58–99% removal of pyrene from the soil in 90 days. Chemical oxidation method was able to reach complete conversion for some PAHs. In electrokinetic treatment, researchers have achieved reliable results in removal of some specific PAHs. Researchers’ innovations in novel studies and advantages/disadvantages of the techniques are also investigated throughout the paper. Finally, it should be noted that an exclusive method or a combination of methods by themselves are not the key to be employed for remediation of every contaminated site but the field characteristics are also essential in selection of the most appropriate decontamination technique(s). The remedy for selection criteria is based on PAH concentrations, site characteristics, costs, shortcomings, and advantages.     

A path analysis model for explaining unsafe behavior in workplaces: the effect of perceived work pressure

Background. Unsafe behavior is closely related to occupational accidents. Work pressure is one the main factors affecting employees’ behavior. The aim of the present study was to provide a path analysis model for explaining how work pressure affects safety behavior. Methods. Using a self-administered questionnaire, six variables supposed to affect safety employees’ behavior were measured. The path analysis model was constructed based on several hypotheses. The goodness of fit of the model was assessed using both absolute and comparative fit indices. Results. Work pressure was determined not to influence safety behavior directly. However, it negatively influenced other variables. Group attitude and personal attitude toward safety were the main factors mediating the effect of work pressure on safety behavior. Among the variables investigated in the present study, group attitude, personal attitude and work pressure had the strongest effects on safety behavior. Conclusion. Managers should consider that in order to improve employees’ safety behavior, work pressure should be reduced to a reasonable level, and concurrently a supportive environment, which ensures a positive group attitude toward safety, should be provided. Replication of the study is recommended.     

The role of sustainability environment in export marketing strategy and performance: a literature review

Increasing environmental issues, economic and cultural differences, the regulatory framework and the great attention to social responsibility, have forced companies to face the challenge of sustainability. Thus, the adaption of a proper marketing strategy in order to achieve a sustainable competitive advantage in the market (specially export markets) has become an important principle in accepting companies. In this regard, this study is a systematic literature review, which investigated 102 published articles in international journals between 1964 and 2015. In the literature review, the main focus was on key issues such as sustainability, marketing strategies, financial and market export performance. In this article, at first, the concept of sustainability from different aspects was collected and described. Then, external factors, such as competitive intensity, public concern, regulations, technology, cultural/social, and economic, as well as internal factors, such as managers, employees, stakeholders, affecting sustainability, were studied. Finally, adaption of export marketing strategies in order to achieve sustainability export performance is discussed.     

Aminobenzenesulfonamide functionalized SBA-15 nanoporous molecular sieve: A new and promising adsorbent for preconcentration of lead and copper ions

A rapid method for the extraction and monitoring of nanogram level of Pb²⁺ and Cu²⁺ ions using uniform silanized mesopor (SBA-15) functionalized with aminobenzenesulfonamide groups and flame atomic absorption spectrometry (FAAS) is presented. Aminobenzenesulfonamide functionalized SBA-15 was synthesized according to procedure in the literature and the presence of organic groups in the silica framework was demonstrated by FT-IR spectra. The functionalized product showed the BET surface area 110 m²/g and pore diameter 5.1 nm, based on adsorption-desorption of N₂ at 77 K. The effect of several variables such as (amount of adsorbent, stirring time, pH and presence of other ions in the medium) has been studied. Lead and copper were completely extracted at pH greater than 3 after stirring for 10 min. The maximum capacity of the adsorbent was found to be 191.3 ± 1.4 and 155.0 ± 1.0 μg of lead and copper ions/mg functionalized SBA-15, respectively. The preconcentration factor of the method was found to be 200. The detection limit of the technique was 3.4 and 0.4 ng/mL for Pb²⁺ and Cu²⁺, respectively. The applications of this methodology for real samples were examined by various water type, black tea and pepper samples.     

Mechanistic aspects of poly(ethylene terephthalate) recycling–toward enabling high quality sustainability decisions in waste management

Environmental Science and Pollution Research - Since plastic waste pollution is a severe environmental concern in modern life, the demand for recycling poly(ethylene terephthalate) (PET) has...     

Simultaneous spectrophotometric determination of crystal violet and malachite green in water samples using partial least squares regression and central composite design after preconcentration by dispersive solid-phase extraction

In this paper, a simple, fast, and inexpensive method is introduced for the simultaneous spectrophotometric determination of crystal violet (CV) and malachite green (MG) contents in aquatic samples using partial least squares regression (PLS) as a multivariate calibration technique after preconcentration by graphene oxide (GO). The method was based on the sorption and desorption of analytes onto GO and direct determination by ultraviolet–visible spectrophotometric techniques. GO was synthesized according to Hummers method. To characterize the shape and structure of GO, FT-IR, SEM, and XRD were used. The effective factors on the extraction efficiency such as pH, extraction time, and the amount of adsorbent were optimized using central composite design. The optimum values of these factors were 6, 15 min, and 12 mg, respectively. The maximum capacity of GO for the adsorption of CV and MG was 63.17 and 77.02 mg g^?1, respectively. Preconcentration factors and extraction recoveries were obtained and were 19.6, 98% for CV and 20, 100% for MG, respectively. LOD and linear dynamic ranges for CV and MG were 0.009, 0.03–0.3, 0.015, and 0.05–0.5 (μg mL^?1), respectively. The intra-day and inter-day relative standard deviations were 1.99 and 0.58 for CV and 1.69 and 3.13 for MG at the concentration level of 50 ng mL^?1, respectively. Finally, the proposed DSPE/PLS method was successfully applied for the simultaneous determination of the trace amount of CV and MG in the real water samples.     

A new method for risk assessment of pillar recovery operation

Safe pillar recovery operations can result in better miner safety and more efficient recovery of ore reserves. Several parameters influence on safety of pillar recovery operation. Each of these parameters is able to reduce safety of operation and cause to detrimental effects during pillar recovery. In this paper, by emphasizing ground control aspects, the most important technical parameters influencing on safety of pillar recovery are introduced and the role of them is described. Then, a new method is presented by combining all of these parameters to assess overall risk of pillar recovery operation in pre-developed room and pillar mines. The proposed method involves calculating the PR-Risk (Pillar Recovery-Risk) indicator. PR-Risk value is between 0 and 100 that based on overall risk of pillar recovery operation divides into four categories: low, medium, high, and very high. PR-Risk is an important indicator for predicting the safety of pillar recovery operation and based on it decision can be made about the safe implementation of operation. Finally, the overall risk of pillar recovery operation in main panel of Tabas Central Mine, located in the mid eastern of Iran, is assessed by use of proposed method in this paper. PR-Risk value in this panel was obtained 51 that show overall risk of operation is medium. Moreover, based on individual assessment of parameters, for the safe implementation of operation and reduction of related risks, reinforcement of roof prior to beginning of operation and partial pillar extraction have been suggested as the most efficient controlling measures.     

Simultaneous spectrophotometric determination of trace amount of polycyclic aromatic hydrocarbons in water samples after magnetic solid-phase extraction by using projection pursuit regression

Magnetic solid-phase extraction based on coated nano-magnets Fe₃O₄ was applied for the preconcentration of four polycyclic aromatic hydrocarbons (PAHs; anthracene, phenanthrene, fluorine, and pyrene) in environmental water samples prior to simultaneous spectrophotometric determination using multivariate calibration method. Magnetic nanoparticles, carrying target metals, were easily separated from the aqueous solution by applying an external magnetic field so, no filtration or centrifugation was necessary. After elution of the adsorbed PAHs, the concentration of PAHs was determined spectrophotometrically with the aid of a new and efficient multivariate spectral analysis base on principal component analysis-projection pursuit regression, without separation of analytes. The obtained results revealed that using projection pursuit regression as a flexible modeling approach improves the predictive quality of the developed models compared with partial least squares and least squares support vector machine methods. The method was used to determine four PAHs in environmental water samples.     

Preparation and investigation of poly(methylmethacrylate) nano-capsules containing haloxyfop-R-methyl and their release behavior

Abstract

In this study, the preparation and characterization of haloxyfop-R-methyl herbicide loaded in poly(methylmethacrylate) (PMMA) nano-capsules by emulsion polymerization and its release behavior were investigated. The chemical characterizations of PMMA/haloxyfop-R-methyl nano-capsules were confirmed by FT-IR spectroscopy method, and the surface morphology was studied by field emission scanning electron microscopy and transmission electron microscopy. Also, the herbicide loading and encapsulation efficiency were analyzed for the herbicide-loaded nano-capsules. The release rate of PMMA/haloxyfop-R-methyl nano-capsules was determined by UV-visible spectroscopy. The thermal properties and thermal stability of nano-capsules were explored by the thermal gravimetric analysis method. The diameter of the nano-capsules was in the range of 100–300?nm. Increasing the amount of herbicide in nano-formulations significantly affected the surface of the nano-capsules and reduced their surface smoothness. Triton-X100 was identified as the best surfactant for the preparation of nano-capsules, and the sample containing the lowest herbicide content showed the best performance in terms of encapsulation and loading efficiency. This sample showed a steady-state release rate during the six days.