Evaluation of environmental impacts from municipal solid waste management in the municipality of Aarhus, Denmark (EASEWASTE).

A new computer based life cycle assessment model (EASEWASTE) was used to evaluate a municipal solid waste system with the purpose of identifying environmental benefits and disadvantages by anaerobic digestion of source-separated household waste and incineration. The most important processes that were included in the study are optical sorting and pre-treatment, anaerobic digestion with heat and power recovery, incineration with heat and power recovery, use of digested biomass on arable soils and finally, an estimated surplus consumption of plastic in order to achieve a higher quality and quantity of organic waste to the biogas plant. Results showed that there were no significant differences in most of the assessed environmental impacts for the two scenarios. However, the use of digested biomass may cause a potential toxicity impact on human health due to the heavy metal content of the organic waste. A sensitivity analysis showed that the results are sensitive to the energy recovery efficiencies, to the extra plastic consumption for waste bags and to the content of heavy metals in the waste. A model such as EASEWASTE is very suitable for evaluating the overall environmental consequences of different waste management strategies and technologies, and can be used for most waste material fractions existing in household waste.     

Environmental assessment of solid waste systems and technologies: EASEWASTE.

A new model has been developed for evaluating the overall resource consumption and environmental impacts of municipal solid waste management systems by the use of life cycle assessment. The model is named EASEWASTE (Environmental Assessment of Solid Waste Systems and Technologies) and is able to compare different waste management strategies, waste treatment methods and waste process technologies. The potential environmental impacts can be traced back to the most important processes and waste fractions that contribute to the relevant impacts. A model like EASEWASTE can be used by waste planners to optimize current waste management systems with respect to environmental achievements and by authorities to set guidelines and regulations and to evaluate different strategies for handling of waste. The waste hierarchy has for decades been governing waste management but the ranking of handling approaches may not always be the most environmentally friendly. The EASEWASTE model can identify the most environmentally sustainable solution, which may differ among waste materials and regions and can add valuable information about environmental achievements from each process in a solid waste management system.     

New TiO2/C sol-gel electrodes for photoelectrocatalytic degradation of sodium oxalate

This paper reports the preparation of carbon doped TiO2 electrodes by a modification of a sol-gel route. The electrodes have been characterized by measuring their photocurrent, as a function of applied potential. Their photoelectrocatalytic activity, relative to similar sol-gel electrodes without carbon, has been assessed by measuring the decomposition of a 10 mM sodium oxalate solution. Measurements have been made on electrodes prepared with 2%, 5% and 10% of active carbon. The highest photocurrents and the highest photoelectrocatalytic activity were both obtained with electrodes prepared by heating, at 600 degrees C, electrodes prepared with 5% of active carbon. All the electrodes showed evidence of enhanced photocatalytic activity at 1.2 V. Five percent addition of C double the measured rates of photodegradation, even though, in these preliminary studies, no attempt has been made to optimize the type of carbon or the details of the electrode preparation.     

Value of biochars from Miscanthus x giganteus cultivated on contaminated soils to decrease the availability of metals in multicontaminated aqueous solutions

The objective of this study was to evaluate the sorption efficiency of eight biochars, made from Miscanthus x giganteus cultivated on contaminated agricultural soil, in aqueous solutions contaminated with metals alone or mixed with polycyclic aromatic hydrocarbons. These biochars were produced in different pyrolysis conditions (temperature, 400/600 °C; heating rate, 5/10 °C min⁻¹; duration, 45/90 min) and compared with an uncontaminated commercialized biochar made of wood. The physicochemical characterization of the Miscanthus biochars confirmed the impact of the pyrolysis on the biochar parameters with substantial differences between the biochars in terms of pH, cation exchange capacity, and specific surface area. The sorption experiment showed higher sorption efficiency of Cd, Pb, and Zn for the Miscanthus biochars produced at 600 °C compared with the biochars produced at 400 °C when the aqueous solutions were mono- or multicontaminated. Furthermore, the desorption study showed that the sorption process was largely irreversible. Therefore, the high sorption capacity of Miscanthus biochars and the low sorption reversibility confirmed that these biochars are a suitable sorbent for metals.

     

A system coupling hybrid biological method with UV/O<Subscript>3</Subscript> oxidation and membrane separation for treatment and reuse of industrial laundry wastewater

The possibilities of application of a three-step system combining hybrid biological treatment followed by advanced UV/O₃ oxidation with in situ generated O₃ and membrane separation (ultrafiltration (UF) and nanofiltration (NF)) to treat and reuse the wastewater from an industrial laundry are presented. By the application of a hybrid moving bed biofilm reactor (HMBBR), the total organic carbon concentration was reduced for about 90 %. However, since the HMBBR effluent still contained organic contaminants as well as high concentrations of inorganic ions and exhibited significant turbidity (8.2 NTU), its further treatment before a possible reuse in the laundry was necessary. The UV/O₃ pretreatment prior to UF was found to be an efficient method of the membrane fouling alleviation. During UF, the turbidity of wastewater was reduced below 0.3 NTU. To remove the inorganic salts, the UF permeate was further treated during NF. The NF permeate exhibited very low conductivity (27–75 μS/cm) and contained only small amounts of Ca²⁺ and Mg²⁺; thus ,it could be reused at any stage of the laundry process.     

SPATIALLY DISTRIBUTED MODELING OF STREAM FLOW DURING STORM EVENTS1

ABSTRACT: The purpose of this paper is to present a new approach for the spatially distributed modeling of water flow during storm events. Distributed modeling of flow during storm events is an important basis for any environmental modeling, including turbidity or sediment transport. During the initial phase of a rainstorm, surface runoff is the main contributor of flow. To provide the spatial components for distributed hydrological modeling a Geographic Information System (GIS) was used to map and visualize contributing areas around a stream channel. Stream segments were defined using the hydrologic response unit (HRU) concept. Lateral flows were derived from GIS output for each segment of the stream and at each time interval of the rain storm and were routed using the kinematic routing equation. This approach is new in hydrological modeling and can be used to enhance many existing simulations. The model is also unique in the fine time scale (i.e., intervals are on the order of minutes). Model results showed good correlation with measured discharge values; however, further studies of contributing area behavior, its relationship with soil types and slope categories, and the influence of watershed size are needed to improve model performance. This model will be used in the future as the basis to model turbidity in streams.     

Modelling of environmental impacts of solid waste landfilling within the life-cycle analysis program EASEWASTE

A new computer-based life-cycle assessment model (EASEWASTE) has been developed to evaluate resource and environmental consequences of solid waste management systems. This paper describes the landfilling sub-model used in the life-cycle assessment program EASEWASTE, and examines some of the implications of this sub-model. All quantities and concentrations of leachate and landfill gas can be modified by the user in order to bring them in agreement with the actual landfill that is assessed by the model. All emissions, except the generation of landfill gas, are process specific. The landfill gas generation is calculated on the basis of organic matter in the landfilled waste. A landfill assessment example is provided. For this example, the normalised environmental effects of landfill gas on global warming and photochemical smog are much greater than the environmental effects for landfill leachate or for landfill construction. A sensitivity analysis for this example indicates that the overall environmental impact is sensitive to the gas collection efficiency and the use of the gas, but not to the amount of leachate generated, or the amount of soil or liner material used in construction. The landfill model can be used for evaluating different technologies with different liners, gas and leachate collection efficiencies, and to compare the environmental consequences of landfilling with alternative waste treatment options such as incineration or anaerobic digestion.