Study on Properties of Poly(urethane-ester) Synthesized from Prepolymers of ε-Caprolactone and 2,2-Dimethyl-1,3-Propanediol Monomers and Their Biodegradability

Poly(urethane-ester) was prepared by polymerization of 4,4′-methylenebis(phenyl isocyanate) (MDI) and prepolymers of ε-caprolactone and 2,2-dimethyl-1,3-propanediol monomers P(CL-DP) with various chain lengths as polyol sources. Characterizations of poly(urethane-ester) were carried out by analysis of functional groups (FTIR), thermal properties (DTA/TGA), mechanical properties (Tensile tester), crystallinity (XRD), and biodegradability. The chain length of prepolymers used in polymerization has a significant effect in properties of poly(urethane-ester) as well as their biodegradability. The formation of poly(urethane-ester) was indicated by the presence of new absorption peaks at wave number of 3,348.2 and 1,596.9 cm^?1 for urethane (–NH–) and aromatic groups in chain of polymers, respectively. The increase chain length of prepolymer used in polymerization with 4,4′-methylenebis(phenyl isocyanate) was observed the increase thermal property and crystallinity of poly(urethane-ester). However, the maximum mechanical property and also biodegradability in activated sludge were observed in poly(urethane-ester) prepared by polymerization of 4,4′-methylenebis(phenyl isocyanate) (MDI) and P(CL-DP) prepolymers with DP/CL ratio of 1/20. Apparently, the amorphous parts of polymers are rapidly decomposed by enzymes of microorganisms, so the crystallinity on the whole of poly(urethane-ester) increases after incubation time of 30 days.     

Tannic acid as a novel and green leaching reagent for cobalt and lithium recycling from spent lithium-ion batteries

Tannic acid–acetic acid is proposed as novel and green chemicals for cobalt and lithium recycling from spent lithium-ion batteries through a leaching process. The synergism of both acids was documented through batch and continuous studies. Tannic acid promotes cobalt dissolution by reducing insoluble Co³⁺ into soluble Co²⁺, while acetic acid is critical to improve the dissolution and stabilize the metals in the pregnant leach solution. Based on batch studies, the optimum conditions for metal recovery at room temperature are acetic acid 1 M, tannic acid 20 g/L, pulp density 20 g/L, and stirring speed 250 rpm (94% cobalt and 99% lithium recovery). The kinetic study shows that increasing temperature to 80 °C improves cobalt and lithium recovery from 65 to 90% (cobalt) and from 80 to 99% (lithium) within 4 h at sub-optimum condition (tannic acid 10 g/L). Kinetic modeling suggests the leaching process was endothermic, and high activation energy indicates a surface chemical process. For other metals, the pattern of manganese and nickel recovery trend follows the cobalt recovery trend. Copper recovery was negatively affected by tannic acid. Iron recovery was limited due to the weak acidic condition of pregnant leach solution, which is beneficial to improve leaching selectivity.