Presence of metals in drinking water distribution networks due to pipe material leaching: a review

Drinking water quality should remain constant from the drinking water treatment plant to the consumer's tap. However, water quality characteristics might be affected by interactions with pipe materials. This review describes the iron, copper, lead, zinc, aluminum, chromium, and cadmium in drinking water leached from the pipe material present in drinking water, as well as the factors and mechanisms that affect leaching processes. Data analysis suggests that monitoring the water quality in distribution systems is important for their proper management; however, the low measured concentrations highlight the need for sensitive sensors. In addition, further research is necessary to anticipate possible future effects before the installation of new materials/infrastructure or changes in water source/treatment.     

In situ removal of arsenic from groundwater by using permeable reactive barriers of organic matter/limestone/zero-valent iron mixtures

In this study, two mixtures of municipal compost, limestone and, optionally, zero-valent iron were assessed in two column experiments on acid mine treatment. The effluent solution was systematically analysed throughout the experiment and precipitates from both columns were withdrawn for scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffractometry analysis and, from the column containing zero-valent iron, solid digestion and sequential extraction analysis. The results showed that waters were cleaned of arsenic, metals and acidity, but chemical and morphological analysis suggested that metal removal was not due predominantly to biogenic sulphide generation but to pH increase, i.e. metal (oxy)hydroxide and carbonate precipitation. Retained arsenic and metal removal were clearly associated to co-precipitation with and/or sorption on iron and aluminum (oxy)hydroxides. An improvement on the arsenic removal efficiency was achieved when the filling mixture contained zero-valent iron. Values of arsenic concentrations were then always below 10 μg/L.     

Sensitivity of Mediterranean woody seedlings to copper, nickel and zinc

The restoration of heavy metal contaminated areas requires information on the response of native plant species to these contaminants. The sensitivity of most Mediterranean woody species to heavy metals has not been established, and little is known about phytotoxic thresholds and environmental risks. We have evaluated the response of four plant species commonly used in ecological restoration, Pinus halepensis, Pistacia lentiscus, Juniperus oxycedrus, and Rhamnus alaternus, grown in nutrient solutions containing a range of copper, nickel and zinc concentrations. Seedlings of these species were exposed to 0.048, 1 and 4 microM of Cu; 0, 25 and 50 microM of Ni; and 0.073, 25 and 100 microM of Zn in a hydroponic silica sand culture for 12 weeks. For all four species, the heavy metal concentration increased in plants as the solution concentration increased and was always higher in roots than in shoots. Pinus halepensis and P. lentiscus showed a higher capacity to accumulate metals in roots than J. oxycedrus and R. alaternus, while the allocation to shoots was considerably higher in the latter two. Intermediate heavy-metal doses enhanced biomass accumulation, whereas the highest doses resulted in reductions in biomass. Decreases in shoot biomass occurred at internal concentrations ranging from 25 to 128 microg g-1 of Zn, and 1.7 to 4.1 microg g( -1) of Cu. Nickel phytoxicity could not be established within the range of doses used. Rhamnus alaternus and J. oxycedrus showed higher sensitivity to Cu and Zn than P. halepensis and, especially, P. lentiscus. Contrasted responses to heavy metals must be taken into account when using Mediterranean woody species for the restoration of heavy metal contaminated sites.     

Evaluation of a lime-mediated sewage sludge stabilisation process. Product characterisation and technological validation for its use in the cement industry

This paper describes an industrial process for stabilising sewage sludge (SS) with lime and evaluates the viability of the stabilised product, denominated Neutral, as a raw material for the cement industry. Lime not only stabilised the sludge, raised the temperature of the mix to 80-100 °C, furthering water evaporation, portlandite formation and the partial oxidation of the organic matter present in the sludge.Process mass and energy balances were determined. Neutral, a white powder consisting of portlandite (49.8%), calcite (16.6%), inorganic oxides (13.4%) and organic matter and moisture (20.2%), proved to be technologically apt for inclusion as a component in cement raw mixes. In this study, it was used instead of limestone in raw mixes clinkerised at 1400, 1450 and 1500 °C. These raw meals exhibited greater reactivity at high temperatures than the limestone product and their calcination at 1500 °C yielded clinker containing over 75% calcium silicates, the key phases in Portland clinker. Finally, the two types of raw meal (Neutral and limestone) were observed to exhibit similar mineralogy and crystal size and distribution.     

Rn concentration in public secondary schools in Galicia (Spain)

In the framework of a ²²²Rn screening campaign that was carried out in 58 public secondary schools in Galicia (NW Spain), the largest radon-prone area in the Iberian Peninsula, a positive correlation between indoor ²²²Rn concentration and outdoor gamma exposure rate was obtained. A new approach to the data acquisition in screening surveys was tested, improving the performances of this type of study and gathering useful data for future remedial actions. Using short-period detectors (charcoal canisters) firstly, in order to detect places showing ²²²Rn concentrations over 400 Bq m⁻³, the number of locations to be measured with long-period detectors (etched track detectors) is reduced. In this screening campaign, 34% of the schools surveyed presented at least one site exceeding the 400 Bq m⁻³ recommended action level established by the EU, and 15% had at least one site with ²²²Rn values over 800 Bq m⁻³. The maximum value recorded was 2084 ± 63 Bq m⁻³. These results are discussed and compared with data obtained in schools of several countries with similar geology. Seven schools were also studied for seasonal variations of ²²²Rn activity concentration. The results were not conclusive, and no significant correlation between season and ²²²Rn concentration was established. Finally, a continuous ²²²Rn concentration monitor was placed in the secondary school exhibiting a mean value of the ²²²Rn concentration very close to 400 Bq m⁻³. Maximum ²²²Rn concentration values were found to occur at times when the school was unoccupied.     

Measuring sustainable development using a multi-criteria model: A case study

This paper shows how Multi-criteria Decision Analysis (MCDA) can help in a complex process such as the assessment of the level of sustainability of a certain area. The paper presents the results of a study in which a model for measuring sustainability was implemented to better aid public policy decisions regarding sustainability. In order to assess sustainability in specific areas, a methodological approach based on multi-criteria analysis has been developed. The aim is to rank areas in order to understand the specific technical and/or financial support that they need to develop sustainable growth.The case study presented is an assessment of the level of sustainability in different areas of an Italian Region using the MCDA approach. Our results show that MCDA is a proper approach for sustainability assessment. The results are easy to understand and the evaluation path is clear and transparent. This is what decision makers need for having support to their decisions. The multi-criteria model for evaluation has been developed respecting the sustainable development economic theory, so that final results can have a clear meaning in terms of sustainability.     

Social and situational dynamics surrounding workplace mistreatment: Context matters

In our introduction to this special issue, we explain why understanding the social and situational context around workplace mistreatment is important. We then provide summaries of the six articles in this special issue and conclude by identifying three key themes—social interpretation, recursive nature of mistreatment, and beyond the dyad—and some important directions for future research.     

Defining and operationalizing theory

Over the last 50 years, the organizational sciences have gone from being largely atheoretical to relying heavily on theory. For various reasons, our approach to theory building has strayed from the principles of scientific acceptability. In this paper, I explore the problems with our approach to theory, the systemic causes of these problems, and the changes that are needed to get us back on track. Copyright © 2016 John Wiley & Sons, Ltd.     

Measurements of indoor radon concentrations in the Santiago de Compostela area

Galician soils are among those with the highest (222)Rn exhalation rates in Spain. A year-round study of the indoor (222)Rn concentration in buildings in the Santiago de Compostela area (Galicia, Northwest of Spain) was performed. The study is based on systematic samplings with active charcoal canisters, following a modified EPA 520/5-87-005 protocol. These measurements were complemented by others obtained using etched track dosimeters. Each data set follows a log-normal distribution, with a geometric mean of (253+/-3)Bqm(-3) for charcoal canisters and (285+/-2.5)Bqm(-3) for etched track detectors. After correcting for the different measuring conditions, the mean value of both methods differed by only 2%. A careful analysis of the seasonal dependence of our measurements did not reveal any significant seasonal variations in the (222)Rn concentration. Parallel to these measurements, different meteorological parameters were recorded, which revealed a direct correlation between the indoor radon concentration and the outdoor temperature derivative with respect to time.     

Performance of a field-scale permeable reactive barrier based on organic substrate and zero-valent iron for in situ remediation of acid mine drainage

A permeable reactive barrier (PRB) was installed in Aznalcóllar (Spain) in order to rehabilitate the Agrio aquifer groundwater severely contaminated with acid mine drainage after a serious mining accident. The filling material of the PRB consisted of a mixture of calcite, vegetal compost and, locally, Fe⁰ and sewage sludge. Among the successes of the PRB are the continuous neutralisation of pH and the removal of metals from groundwater within the PRB (removals of >95 %). Among the shortcomings are the improper PRB design due to the complexity of the internal structure of the Agrio alluvial deposits (which resulted in an inefficient capture of the contaminated plume), the poor degradability of the compost used and the short residence time within the PRB (which hindered a complete sulphate reduction), the clogging of a section of the PRB and the heterogeneities of the filling material (which resulted in preferential flows within the PRB). Undoubtedly, it is only through accumulated experience at field-scale systems that the potentials and limits of the PRB technology can be determined.