Return period of enhanced gamma ray dose rates: regional differences observed in Japan

We estimated the return period of an increased gamma ray dose rate (Delta gamma) derived from (222)Rn progeny deposited with precipitation. The approximate probability distribution for Delta gamma followed a Hazen plot, which is an empirical plotting equation, indicating that the distribution of Delta gamma was approximated by a nearly double-exponential. The distribution of Delta gamma was well represented by the Gumbel distribution, and the return period for Delta gamma was estimated theoretically. There was a notable regional difference in the return period between the coast of the Japan Sea and the inland or Pacific coast areas: the return period for a given Delta gamma at monitoring sites on the Sea of Japan coast was 1.5 to 2.5 times shorter than that in the inland or Pacific coast areas. This variation with locality suggests that the rate of wet-deposition of (222)Rn progeny is larger at sites on the Sea of Japan coast than inland or on the Pacific coast areas. The expected return period for the maximum Delta gamma at each site was about 10 years. This estimation of the return period of Delta gamma is a novel approach to the study of environmental science in fields such as radioactivity.     

H and O isotopic differences in typhon and urban-induced heavy rain in Tokyo

Stable isotope ratios of hydrogen and oxygen of water are useful tracers of the hydrological cycle. For example, isotopes monitor the evapotranspiration in vegetated areas, local snow ice processes and stream water flow processes. δ¹⁸O and δD in rainwater reflect the processes of evaporation, condensation and precipitation. Heavy rains thus modify the stable isotope ratio of ground water, stream water and transpiration water vapor. However, the controlling factors of δ¹⁸O and δD are not clear. Here we analyzed the inorganic ion concentration and stable isotope ratio in 38 normal rainwater and 15 heavy rainwater samples were collected in Shinjuku, Tokyo, Japan, during four years from October 2012 to December 2015. Results show a decrease in δ¹⁸O and δD values with the total rainfall amount, thus highlighting the amount effect. δ¹⁸O and δD volume-weighted mean values in typhoon heavy rain were higher than the values estimated from amount effect, whereas δ¹⁸O and δD volume-weighted mean values in urban-induced heavy rain were lower. Typhoon heavy rain has high Na⁺ ratio and stable isotope ratios, while urban-induced heavy rain has low Na⁺ ratio and stable isotope ratio.     

Liquefaction process for a hydrothermally treated waste mixture containing plastics

Most landfilled plastic waste is a mixture or is in the form of composites with incombustible wastes such as glass, metals, and ceramics. After hydrothermal treatment, including a steam-explosion process, the separation of mixed waste (MW) into organic and inorganic substances becomes easy. However, the effect of hydrothermal pretreatment on the subsequent liquefaction of organic substances from MW is not obvious. In this study, the effects on the liquefaction of polystyrene and high-density polyethylene are discussed. Moreover, optimum conditions for the liquefaction of organic substances from hydrothermally treated MW are identified. By means of this hydrothermal pretreatment, including the steam-explosion process, polystyrene and high-density polyethylene can be significantly converted to oil by liquefaction at 300°–400°C. In comparison with liquefaction of hydrothermally pretreated mixed waste (HMW) at 300°–400°C with a batch type reactor, the yield of oil increases significantly on liquefaction using a semi-batch type reactor. It is considered that the radical chain and termination reactions among the radicals from HMW were inhibited in the semi-batch type reactor. On liquefaction of HMW in a semi-batch reactor, the conversion of HMW to oil was enhanced on increasing the liquefaction temperature to 350°C and the holding time to 60 min. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

Effect of transition metal doping under reducing calcination atmosphere on photocatalytic property of TiO2 immobilized on SiO2 beads

TiO₂ immobilized on SiO₂ (TiO₂/SiO₂) have been prepared by sol-gel method and various ions of transition metals (Cr³⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺) were doped on the photocatalyst using wet impregnation method under reducing calcination atmosphere. The photocatalytic activity of metal doped TiO₂/SiO₂ towards phenol degradation under black light irradiation were investigated and compared with undoped TiO₂/SiO₂. The results showed that the photoresponse of Cu²⁺ and Zn²⁺ doped TiO₂/SiO₂ were larger than undoped TiO₂/SiO₂, indicating that the photogenerated carriers were separated more efficiently in Cu²⁺ and Zn²⁺ doped TiO₂/SiO₂. The reactivity was in the order of Cu²⁺ > Zn²⁺ > Ni²⁺ > Cr³⁺ > Co²⁺. The different photoreactivity was ascribed to combine effect of the different ionic radii and photocorrison tendency of the dopants. The sample was also characterized by surface analytical methods such as X-ray diffraction, scanning electron micrograph/electron dispersive X-ray analyzer and UV-Vis absorption spectrum.     

Present background levels of surface 137Cs and (239,240)Pu concentrations in the Pacific

The present levels of anthropogenic radionuclides, 137Cs and (239,240)Pu, in surface waters of the Pacific are estimated using the HAM database, which is a comprehensive data set of 137Cs, (239,240)Pu and other anthropogenic radionuclides. The time-series data of surface 137Cs and (239,240)Pu suggests that surface 137Cs and (239,240)Pu concentrations in the Pacific since 1971 decrease exponentially in each sea area, although the temporal changes of surface 137Cs and (239,240)Pu differed between sea areas of the Pacific. The calculated 137Cs concentrations in the Pacific surface waters in 2000 are homogeneous in the Pacific, comparing with that in the 1960s and 1970s, although they are still high in the North Pacific and low in the South Pacific. The biogeochemical and physical processes are significant factors to control present levels of surface (239,240)Pu concentrations, which are high in the Subarctic and equatorial Pacific and low in the mid-latitude region of the eastern North Pacific.     

Numerical simulation of 137Cs and (239,240)Pu concentrations by an ocean general circulation model

We simulated the spatial distributions and the temporal variations of 137Cs and (239,240)Pu concentrations in the ocean by using the ocean general circulation model which was developed by National Center of Atmospheric Research. These nuclides are introduced into seawaters from global fallout due to atmospheric nuclear weapons tests. The distribution of radioactive deposition on the world ocean is estimated from global precipitation data and observed values of annual deposition of radionuclides at the Meteorological Research Institute in Japan and several observed points in New Zealand. Radionuclides from global fallout have been transported by advection, diffusion and scavenging, and this concentration reduces by radioactive decay in the ocean. We verified the results of the model calculations by comparing simulated values of 137Cs and (239,240)Pu in seawater with the observed values included in the Historical Artificial Radionuclides in the HAM database, which has been constructed by the Meteorological Research Institute. The vertical distributions of the calculated 137Cs concentrations were in good agreement and are in good agreement with the observed profiles in the 1960s up to 250 m, in the 1970s up to 500 m, in the 1980s up to 750 m and in the 1990s up to 750 m. However, the calculated 137Cs concentrations were underestimated compared with the observed 137Cs at the deeper layer. This may suggest other transport processes of 137Cs to deep waters. The horizontal distributions of 137Cs concentrations in surface water could be simulated. A numerical tracer release experiment was performed to explain the horizontal distribution pattern. A maximum (239,240)Pu concentration layer occurs at an intermediate depth for both observed and calculated values, which is formed by particle scavenging. The horizontal distributions of the calculated (239,240)Pu concentrations in surface water could be simulated by considering the scavenging effect.     

Polychlorinated dibenzo-p-dioxins and dibenzofurans in paddy soils and river sediments in Akita, Japan

Paddy soils and sediments from the Yoneshirogawa, Omonogawa, and Koyoshigawa River Basins in Akita were analyzed for polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs). The levels and compositions in those samples including soils from non-agricultural areas (non-agricultural soils) were investigated using isomer-specific analysis to determine characteristic sources. The PCDD/PCDF compositions in the samples were compared with respect to possible sources. The PCDD/PCDF concentrations in paddy soils were much higher than those in the non-agricultural soils and much higher than those found in other parts of Japan. Although PCDD/PCDFs were ubiquitous in sediments from river sources to mouths of the respective river basins, those concentrations were much lower than those from paddy soils and non-agricultural soils, and from other parts of Japan. Comparison of PCDD/PCDF homologues and isomer compositions for samples indicated that compositions of paddy soils and sediments, except for those from river sources, had similar characteristics to PCDD/PCDFs originating from impurities in herbicides, 2,4,6-trichlorophenyl 4-nitrophenyl ether (CNP) and pentachlorophenol (PCP), and that compositions of river-source sediments and non-agricultural soils resembled those of atmospheric depositions. Results of statistical analyses suggest that PCDD/PCDF contamination of paddy soils and sediments is attributable mainly to three sources: CNP, PCP, and atmospheric deposition. Results of this study also demonstrate that CNP and PCP are not only important contaminants of local areas of Japan, but that they exist throughout Akita, in northern Japan. We therefore conclude that PCDD/PCDF pollution caused by those compounds has a widespread influence on paddy soils and river sediments in Japan.     

Urban horticulture: its significance to environmental conservation

Urban horticulture, defined as plant production activities that are conducted in a city or suburb that produce horticultural plants that are wholly or partially edible, and which are economically viable, has the potential to reduce CO₂ emissions caused by the transportation of produce. Moreover, to increase productivity in limited areas and use limited resources effectively, closed or semi-closed systems (i.e., greenhouses) are considered more advantageous than open systems (i.e., fields) from which resources can easily escape into the surrounding environment. In this paper the significance of urban horticulture in reducing CO₂ emissions in the transportation process is discussed with reference to simple case studies. In the context of building or rebuilding greenhouses suitable for urban horticulture, the present situation regarding resource inputs and outputs in greenhouses is compared to that in open fields. The reduction of resource inputs and outputs in greenhouse production is also discussed.     

Determination of ammonium on an integrated microchip with LED-induced fluorescence detection

A simply fabricated microfluidic device integrated with a fluorescence detection system has been developed for on-line determination of ammonium in aqueous samples. A 365-nm light-emitting diode (LED) as an excitation source and a minor band pass filter were mounted into a polydimethylsiloxane (PDMS)-based microchip for the purpose of miniaturization of the entire analytical system. The ammonium sample reacted with o-phthaldialdehyde (OPA) on-chip with sodium sulfite as reducing reagent to produce a fluorescent isoindole derivative, which can emit fluorescence signal at about 425 nm when excited at 365 nm. Effects of pH, flow rate of solutions, concentrations of OPA-reagent, phosphate and sulfite salt were investigated. The calibration curve of ammonium in the range of 0.018-1.8 μupg/mL showed a good linear relationship with R² = 0.9985, and the detection limit was (S/N = 3) 3.6 × 10^-4 μupg/mL. The relative standard deviation was 2.8% (n = 11) by calculating at 0.18 μupg/mL ammonium for repeated detection. The system was applied to determine the ammonium concentration in rain and river waters, even extent to other analytes fluorescence detection by the presented device.