Preparation of Viscose Fibres Stripped of Reactive Dyes and Wrinkle-Free Crosslinked Cotton Textile Finish

The chemical recycling of cellulosic fibres may represent a next-generation fibre–fibre recycling system for cotton textiles, though remaining challenges include how to accommodate fibre blends, dyes, wrinkle-free finishes, and other impurities from finishing. These challenges may disrupt the regeneration process steps and reduce the fibre quality. This study examines the impact on regenerated viscose fibre properties of a novel alkaline/acid bleaching sequence to strip reactive dyes and dimethyloldihydroxyethyleneureas (DMDHEU) wrinkle-free finish from cotton textiles. Potentially, such a bleaching sequence could advantageously be integrated into the viscose process, reducing the costs and environmental impact of the product. The study investigates the spinning performance and mechanical properties (e.g., tenacity and elongation) of the regenerated viscose fibres. The alkaline/acid bleaching sequence was found to strip the reactive dye and DMDHEU wrinkle-free finish from the cotton fabric, so the resulting pulp could successfully be spun into viscose fibres, though the mechanical properties of these fibres were worse than those of commercial viscose fibres. This study finds that reactive dyes and DMDHEU wrinkle-free finish affect the viscose dope quality and the regeneration performance. The results might lead to progress in overcoming quality challenges in cellulosic chemical recycling.     

A Comparison of Two Techniques for the Collection and Analysis of Polynuclear Aromatic Compounds in Ambient Air

A demonstration of the GHEMFIX solidification/stabilization process was conducted under the United States Environmental Protection Agency’s (EPA) Superfund Innovative Technology Evaluation (SITE) program. The demonstration was conducted in March 1989, at the Portable Equipment Salvage Company (PESC) uncontrolled hazardous waste site in Clackamas, Oregon. Waste containing lead, copper, and polychlorinated biphenyls (PCBs) from four different areas of the site were treated. Results showed substantial reduction of leachable lead and copper between the untreated waste and treated waste utilizing the EPA Toxicity Characteristics Leaching Procedure (TCLP) test. The effectiveness of this process for immobilizing PCBs could not be determined since the raw waste did not leach PCBs at high concentrations, utilizing the TCLP test. Data from other leaching tests for lead and copper would need to be utilized as input into a site specific groundwater model to determine whether solidification/stabilization would be an acceptable remedy for the site. Physical testing results indicated durability in exposed conditions.     

Electrokinetic ion transport through unsaturated soil: 1. Theory, model development, and testing

An electromigration transport model for non-reactive ion transport in unsaturated soil was developed and tested against laboratory experiments. This model assumed the electric potential field was constant with respect to time, an assumption valid for highly buffered soil, or when the electrode electrolysis reactions are neutralized. The model also assumed constant moisture contents and temperature with respect to time, and that electroosmotic and hydraulic transport of water through the soil was negligible. A functional relationship between ionic mobility and the electrolyte concentration was estimated using the chemical activity coefficient. Tortuosity was calculated from a mathematical relationship fitted to the electrical conductivity of the bulk pore water and soil moisture data. The functional relationship between ionic mobility, pore-water concentration, and tortuosity as a function of moisture content allowed the model to predict ion transport in heterogeneous unsaturated soils. The model was tested against laboratory measurements assessing anionic electromigration as a function of moisture content. In the test cell, a strip of soil was spiked with red dye No 40 and monitored for a 24-h period while a 10-mA current was maintained between the electrodes. Electromigration velocities predicted by the electromigration transport model were in agreement with laboratory experimental results. Both laboratory-measured and model-predicted dye migration results indicated a maximum transport velocity at moisture contents less than saturation due to competing effects between current density and tortuosity as moisture content decreases.     

Antipredator defenses along a latitudinal gradient in Rana temporaria

Antipredator defenses are expected to decrease toward higher latitudes because predation rates are predicted to decrease with latitude. However, latitudinal variation in predator avoidance and defense mechanisms has seldom been studied. We studied tadpole antipredator defenses in seven Rana temporaria populations collected along a 1500-km latitudinal gradient across Sweden, along which previous studies have found increasing tadpole growth and development rates. In a laboratory common garden experiment, we measured behavioral and morphological defenses by raising tadpoles in the presence and absence of a predator (Aeshna dragonfly larva) in two temperature treatments. We also estimated tadpole survival in the presence of free-ranging predators and compared predator densities between R. temporaria breeding ponds situated at low and high latitudes. Activity and foraging were generally positively correlated with latitude in the common garden experiment. While all populations responded to predator presence by decreasing activity and foraging, high-latitude populations maintained higher activity levels in the presence of the predator. All populations exhibited defensive morphology in body and tail shape. However, whereas tail depth tended to increase with latitude in the presence of predator, it did not change with latitude in the absence of the predator. Predator presence generally increased larval period and decreased growth rate. In the southern populations, predator presence tended to have a negative effect on metamorphic size, whereas in the northern populations predators had little or a positive effect on size. Latitude of origin had a strong effect on survival in the presence of a free-ranging predator, with high-latitude tadpoles experiencing higher mortality than those from the low latitudes. In the wild, predator densities were significantly lower in high-latitude than in mid-latitude breeding ponds. Although the higher activity level in the northern populations seems to confer a significant survival disadvantage under predation risk, it is probably needed to maintain the high growth and development rates. However, the occurrence of R. temporaria at high latitudes may be facilitated by the lower predator densities in the north.     

Mate replacement in experimentally widowed collared flycatchers (Ficedula albicollis): determinants and outcomes

There is increasing evidence that sexual selection may be intense even in socially monogamous birds, resulting from both mate choice and sperm competition. We studied these two modes of sexual selection experimentally by removing paired male collared flycatchers, Ficedula albicollis, from their mates for 2 days and investigating the factors that influenced the likelihood of a replacement male appearing and how the removals influenced paternity. Replacement males (usually neighbouring males) appeared at 81% (n = 37) of nests where males were removed. The likelihood of this appearance was unaffected by the probable reproductive value of the female's clutch to the replacing male. A replacement was, however, less likely when the original male had a large forehead patch, a trait previously shown to be subject to sexual selection in this population. Experimental removal of males increased the level of sperm competition: 74% of experimental broods were multiply sired, compared to 29% of unmanipulated broods in a previous study. Only two factors predicted how paternity was shared between males: removed males fathered more young if removed closer to laying, and if they had larger forehead patches. The former result is consistent with last-male sperm precedence determining paternity, whereas the latter adds to other evidence that forehead patch size is the target of female preference in this species. Our results suggest that females exert some control over male replacement, and also that they may influence the fertilisation success of males by behavioural means. Received: 15 July 1998 / Received in revised form: 16 March 1999 / Accepted: 28 March 1999     

Regional-scale land-cover change during the 20th century and its consequences for biodiversity

Extensive changes in land cover during the 20th century are known to have had detrimental effects on biodiversity in rural landscapes, but the magnitude of change and their ecological effects are not well known on regional scales. We digitized historical maps from the beginning of the 20th century over a 1652 km² study area in southeastern Sweden, comparing it to modern-day land cover with a focus on valuable habitat types. Semi-natural grassland cover decreased by over 96 % in the study area, being largely lost to afforestation and silviculture. Grasslands on finer soils were more likely to be converted into modern grassland or arable fields. However, in addition to remaining semi-natural grassland, today’s valuable deciduous forest and wetland habitats were mostly grazed grassland in 1900. An analysis of the landscape-level biodiversity revealed that plant species richness was generally more related to the modern landscape, with grazing management being a positive influence on species richness.     

耕作农场决策的环境和经济影响:一种综合建模方法

本文研究了耕作农场中自然环境和人类起源系统的相互依赖关系.动态模拟模型的方法论起源于环境系统分析和微型模拟的建模传统.这个模型复制了自然流(例如能源、原料、排放、产品)、作为决策者的农场主以及影响农场的结构状况之间的相互连接.运行模型的目的是为了回答:价格、津贴、农场主的环境观及其生产配置选择的能力的差别对盈利和环境的影响(例如温室气体的影响、富营养化、酸化和能源消耗)是什么?模型模拟的结果说明,例如,就经济表现而言,农场主可以从两个相对可持续的战略中选择,或者专注于有机生产(从而从更高津贴和输出价格中受益),或者专注于常规的耕作并使用杀虫剂和化肥(从而通过大量生产获益).关于环境影响,由于分配肥料使用的困难,因此在有机农业和常规农业之间没有明确的区别.这个发现本质上是和系统边界的选择相关的,文章对于系统边界也作了彻底充分的讨论.     

Risk and vulnerability analysis: A feasible process for local climate adaptation in Sweden?

Climate change is an important new challenge for local authorities. This study analyses the potential for using the Swedish mandatory process for risk and vulnerability analysis (RVA) as a vehicle to improve local climate adaptation work. An advantage with RVA is its comprehensive approach in dealing with all relevant threats and all vital functions of society. In order to test the applicability of incorporating climate adaptation into RVA, we studied practical experiences from three Swedish municipalities. In all municipalities, a pre-study to identify relevant climate-induced events was performed. In one municipality, this was followed by a more detailed analysis of the potential impacts of these events on the functions of the various administrations and companies within the local authority. Problems identified in successful integration of climate change into the municipal RVA process were lack of sufficient knowledge to identify the impacts of climate change on the level of the respective specialist or district administration and lack of resources to perform the analysis. There were also some difficulties in including a long-term perspective relevant for climate adaptation into RVA, which usually focuses on current threats. A positive outcome was that work on extreme climate events in RVA provided a traceable method to identify events with a potentially great impact on the function of local society and results that could be fed into other ongoing processes, such as spatial planning and housing plans.     

Urban tinkering

Cities are currently experiencing serious, multifaceted impacts from global environmental change, especially climate change, and the degree to which they will need to cope with and adapt to such challenges will continue to increase. A complex systems approach inspired by evolutionary theory can inform strategies for policies and interventions to deal with growing urban vulnerabilities. Such an approach would guide the design of new (and redesign of existing) urban structures, while promoting innovative integration of grey, green and blue infrastructure in service of environmental and health objectives. Moreover, it would contribute to more flexible, effective policies for urban management and the use of urban space. Four decades ago, in a seminal paper in Science, the French evolutionary biologist and philosopher Francois Jacob noted that evolution differs significantly in its characteristic modes of action from processes that are designed and engineered de novo (Jacob in Science 196(4295):1161–1166, 1977). He labeled the evolutionary process “tinkering”, recognizing its foundation in the modification and molding of existing traits and forms, with occasional dramatic shifts in function in the context of changing conditions. This contrasts greatly with conventional engineering and design approaches that apply tailor-made materials and tools to achieve well-defined functions that are specified a priori. We here propose that urban tinkering is the application of evolutionary thinking to urban design, engineering, ecological restoration, management and governance. We define urban tinkering as:

A mode of operation, encompassing policy, planning and management processes, that seeks to transform the use of existing and design of new urban systems in ways that diversify their functions, anticipate new uses and enhance adaptability, to better meet the social, economic and ecological needs of cities under conditions of deep uncertainty about the future.

This approach has the potential to substantially complement and augment conventional urban development, replacing predictability, linearity and monofunctional design with anticipation of uncertainty and non-linearity and design for multiple, potentially shifting functions. Urban tinkering can function by promoting a diversity of small-scale urban experiments that, in aggregate, lead to large-scale often playful innovative solutions to the problems of sustainable development. Moreover, the tinkering approach is naturally suited to exploring multi-functional uses and approaches (e.g., bricolage) for new and existing urban structures and policies through collaborative engagement and analysis. It is thus well worth exploring as a means of delivering co-benefits for environment and human health and wellbeing. Indeed, urban tinkering has close ties to systems approaches, which often are recognized as critical to sustainable development. We believe this concept can help forge much-closer, much-needed ties among engineers, architects, evolutionary ecologists, health specialists, and numerous other urban stakeholders in developing innovative, widely beneficial solutions for society and contribute to successful implementation of SDG11 and the New Urban Agenda.