Use of sequential extraction to assess metal partitioning in soils

The state of heavy metal pollution and the mobility of Cd, Cu, Ni, Cr, Pb and Zn were studied in three texturally different agricultural soil profiles near a Cu-Ni smelter in Harjavalta, Finland. The pseudo-total concentrations were determined by an aqua regia procedure. Metals were also determined after division into four fractions by sequential extraction with (1) acetic acid (exchangeable and specifically adsorbed metals), (2) a reducing agent (bound to Fe/Mn hydroxides), (3) an oxidizing agent (bound to soil organic matter) and (4) aqua regia (bound to mineral structures). Fallout from the smelter has increased the concentrations of Cd, Cu and Ni in the topsoil, where 75-90% of Cd, 49-72% of Cu and 22-52% of Ni occurred in the first two fractions. Slight Pb and Zn pollution was evident as well. High proportions of mobile Cd, Cu and Ni also deeper in the sandy soil, closest to the smelter, indicated some downward movement of metals. The hydroxide-bound fraction of Pb dominated in almost all soils and horizons, while Ni, Cr and Zn mostly occurred in mineral structures. Aqua regia extraction is usefully supplemented with sequential extraction, particularly in less polluted soils and in soils that exhibit substantial textural differences within the profiles.     

Evaluation of biogas production from seaweed in batch tests and in UASB reactors combined with the removal of heavy metals

Seaweed can be anaerobically digested for the production of energy-rich methane. However, the use of seaweed digestate as a fertilizer may be restricted because of the high heavy metal content especially cadmium. Reducing the concentration of heavy metals in the digestate will enable its use as a fertilizer. In this laboratory-scale study, the potential of seaweed and its leachate in the production of methane were evaluated in batch tests. The effect of removing the heavy metals from seaweed leachate was evaluated in both batch test and treatment in an upflow anaerobic sludge blanket (UASB) reactor. The heavy metals were removed from seaweed leachate using an imminodiacetic acid (IDA) polyacrylamide cryogel carrier. The methane yield obtained in the anaerobic digestion of seaweed was 0.12 N l CH₄/g VS_added. The same methane yield was obtained when the seaweed leachate was used for methane production. The IDA-cryogel carrier was efficient in removing Cd²⁺, Cu²⁺, Ni²⁺ and Zn²⁺ ions from seaweed leachate. The removal of heavy metals in the seaweed leachate led to a decrease in the methane yield. The maximum sustainable organic loading rate (OLR) attained in the UASB reactor was 20.6 g tCOD/l/day corresponding to a hydraulic retention time (HRT) of 12 h and with a total COD removal efficiency of about 81%. Hydrolysis and treatment with IDA cryogel reduced the heavy metals content in the seaweed leachate before methane production. This study also demonstrated the suitability of the treatment of seaweed leachate in a UASB reactor.     

Impact of food industrial waste on anaerobic co-digestion of sewage sludge and pig manure

The performance of an anaerobic digestion process is much dependent on the type and the composition of the material to be digested. The effects on the degradation process of co-digesting different types of waste were examined in two laboratory-scale studies. In the first investigation, sewage sludge was co-digested with industrial waste from potato processing. The co-digestion resulted in a low buffered system and when the fraction of starch-rich waste was increased, the result was a more sensitive process, with process overload occurring at a lower organic loading rate (OLR). In the second investigation, pig manure, slaughterhouse waste, vegetable waste and various kinds of industrial waste were digested. This resulted in a highly buffered system as the manure contributed to high amounts of ammonia. However, it is important to note that ammonia might be toxic to the micro-organisms. Although the conversion of volatile fatty acids was incomplete the processes worked well with high gas yields, 0.8-1.0 m3 kg(-1) VS.     

The human serum paraoxonase—Polymorphism and specificity

Human serum contains EDTA‐sensitive (Ca⁺⁺‐dependent) and EDTA‐stable (albumin) paraoxonases which hydrolyse paraoxon, 0,0‐diethyl,0–4‐nitrophenyl phosphate.

In Caucasians the EDTA‐sensitive enzyme shows a genetically determined polymorphism which is governed by two alleles. In typical Mongoloid or Negro populations this polymorphism is expressed to a lesser degree, and in a few samples (e.g. Aborigines) it cannot be observed at all. The distribution of the activity of the EDTA‐stable (albumin) paraoxonase is unimodal.

Many authors supposed that paraoxonase is an arylesterase (EC 3.1.1.2) which means that it is also able to hydrolyse phenylacetate or β‐naphthylacetate. New investigations have shown that the human serum fractions splitting paraoxon can be separated from those hydrolysing phenylacetate and related substrates.

The polymorphism of the EDTA‐sensitive human serum paraoxonase can be applied to investigations concerning specificity. From this it becomes evident that this enzyme is rather specific. Already slight changes of the paraoxon molecule lead to a decrease of activity. On the other hand the enzyme seems to hydrolyse also phosphonic acid esters and 4‐nitrophenylacetate in the same way like paraoxon (polymorphism).

There is a linkage relationship of paraoxonase with cystic fibrosis and DNA markers. According to these results the (EDTA‐sensitive) paraoxonase locus is on the human chromosome 7.

A high serum paraoxonase level actually protects serum cholinesterase (EC 3.1.1.8) and has to be considered in biological monitoring of workers exposed to parathion.     

Environmental evaluation of new technology: printed electronics case study

The environmental evaluation of new technology faces many challenges, but at the same time it is an opportunity to take proactive measures to prevent possible negative effects on the environment. Examination of environmental issues using the life cycle approach should form an integrated part of comprehensive technology and product development. The aim of this study was to assess the environmental issues related to a rising technology, printed electronics. Printing is an additive process, having no need for extra material and corrosive chemicals. On the basis of an evaluation made for a prototype product, i.e. a wristband, it was observed that more information on the new materials and further optimization of the process are required before electronics printing can be claimed to be environmentally friendly.     

Comparison of VOC emissions between air-dried and heat-treated Norway spruce (Picea abies), Scots pine (Pinus sylvesteris) and European aspen (Populus tremula) wood

Heat-treated wood is an increasingly popular decoration material. Heat-treatment improves dimensional stability of the wood and also prevents rot fungus growth. Although production of heat-treated wood has been rapidly increasing, there is only little information about the VOC emissions of heat-treated wood and its possible influences on indoor air quality. In the present study, VOC emissions from three untreated (air-dried) and heat-treated wood species were compared during a four weeks test period. It appeared that different wood species had clearly different VOC emission profiles. Heat-treatment was found to decrease VOC emissions significantly and change their composition. Especially, emissions of terpenes decreased from softwood samples and aldehydes from European aspen samples. Emissions of total aldehydes and organic acids were at the same level or slightly higher from heat treated than air-dried softwood samples. In agreement with another recent study, the emissions of furfural were found to increase and those of hexanal to decrease from all the wood species investigated. In contrast to air-dried wood samples, emissions of VOCs were almost in steady state from heat treated wood samples even in the beginning of the test.     

Mountain environment and population in Georgia: case study of Upper Svaneti

The purpose of the presented research is to identify local community opinions toward ecological problems in one of the mountainous region of Georgia (Upper Svaneti), to analyze how population ‘perceive, experience, and interpret’ the social, and ecological issues.

The paper is based on the results of Upper Svanet ipopulation’s survey which was carried out by the authors of presented paper during the August of 2015 and 2016.The questionnaire was elaborated taking into account the peculiarities of the region. Stratified-cluster selection method was used for selection of respondents and database compilation. For statistical analysis of polling data the SPSS package was used.

Based on the statistical analysis of survey results, the following issues have been studied: the most important ecological problems, environmental problems with respect to socio-economic ones, information sources on ecological problems, people’s trust in environmental issues, awareness level of the population on environmental policy, their personal contribution in environmental protection, ways to solve ecological problems, implemented environmental measures.

The obtained results are important to foster mountain population’s active participation in processes that contribute to decision-making processes, planning and implementing programs for sustainable development.     

Evaluating the biogas potential of the dry fraction from pretreatment of food waste from households

At the waste handling company NSR, Helsingborg, Sweden, the food waste fraction of source separated municipal solid waste is pretreated to obtain a liquid fraction, which is used for biogas production, and a dry fraction, which is at present incinerated. This pretreatment and separation is performed to remove impurities, however also some of the organic material is removed. The possibility of realising the methane potential of the dry fraction through batch-wise dry anaerobic digestion was investigated. The anaerobic digestion technique used was a two-stage process consisting of a static leach bed reactor and a methane reactor. Treatment of the dry fraction alone and in a mixture with structural material was tested to investigate the effect on the porosity of the leach bed. A tracer experiment was carried out to investigate the liquid flow through the leach beds, and this method proved useful in demonstrating a more homogenous flow through the leach bed when structural material was added. Addition of structural material to the dry fraction was needed to achieve a functional digestion process. A methane yield of 98 m³/ton was obtained from the dry fraction mixed with structural material after 76 days of digestion. This was in the same range as obtained in the laboratory scale biochemical methane potential test, showing that it was possible to extract the organic content in the dry fraction in this type of dry digestion system for the production of methane.     

Polychlorinated biphenyls-containing electrical insulating oil contaminated soil treatment with calcium and magnesium peroxides

Calcium and magnesium peroxides were applied for the treatment of soil contaminated by polychlorinated biphenyls-containing electrical insulating oil (Aroclor 1016). The removal of PCB-containing electrical insulating oil was achieved with the addition of either calcium peroxide or magnesium peroxide alone and dependent on dosages of the chemical. A 21-d treatment of 60% watered soil with the moderate addition (chemical/oil weight ratio of 0.005/1) of either calcium peroxide or magnesium peroxide resulted in nearly complete (96 ± 2%) oil removal, unsubstantial increase in soil pH and almost no changes in oxygen consumption and dehydrogenase activity, making it suitable for the soil decontamination.