Conversion of CCA-treated wood to ethanol: a method to reduce leaching of metals from disposed treated wood prior to disposal

The objective of this paper is to evaluate the feasibility of producing ethanol from CCA-treated wood that is highly leachable. Following the initial tests, CCA-treated wood was hydrolysed and fermented and the results showed not only that ethanol was produced during the fermentation process but that metals were taken up by the yeast. Toxicity characteristic leaching procedure tests of the hydrolysed wood leached less than 4 mg/L of As while minimal amounts of Cr and Cu remained in the hydrolysed wood which makes landfilling of hydrolysed wood acceptable and less hazardous. A slightly lower amount of ethanol from CCA-treated than untreated wood was produced (6 and 7 g/L, respectively). In general, it suggests that production of ethanol as a source of energy from a hazardous waste (CCA-treated wood) is feasible.     

Decolorization and degradation of acid dye with immobilized titania nanoparticles

This paper addresses the decolorization and degradation of acid dye by a heterogeneous photocatalytic process using immobilized nano-sized TiO₂ particles as the photocatalyst. Sackcloth fiber was used as a support to immobilize the nano-sized TiO₂ photocatalyst. The structural properties of the immobilized photocatalyst were characterized by XRD, SEM and EDX. UV–Vis absorption spectroscopy and the measurement of the chemical oxygen demand (COD) were also used for the process performance studies. The XRD results did not show significant changes in the structure of P25 as a consequence of the immobilization procedure. The formation of titania crystallites in the sackcloth fiber was confirmed by SEM/EDX. The photocatalytic activities of TiO₂-coated sackcloth fiber catalyst were evaluated using Acid Black 26 as a model organic contaminant and using UV-A radiation. Experimental results showed that after 60 min, the degradation of Acid Black 26 with the immobilized TiO₂ particles was higher than that with plain TiO₂. Based on the COD results, after 3 h, the TiO₂-coated sackcloth fiber effectively decomposed all of the organic compounds present in dye solution under the studied experimental conditions. The effects of the oxidant H₂O₂, initial dye concentration and pH on the photocatalytic degradation were also investigated. The presence of CO₃^2? as a dissolved inorganic anion had the highest inhibitory effect on the decolorization of the dye, when compared with the other anions investigated. Kinetics analysis indicates that the photocatalytic decolorization rate of Acid Black 26 can be described by a pseudo-first-order model.     

Vertical oil dispersion profile under non-breaking regular waves

An experimental program was conducted to investigate vertical oil dispersion of surface oil spills under non-breaking regular waves. The variation in oil concentration caused by oil dispersion in a water column was studied to determine the vertical oil dispersion profile. The experiments were performed using different waves characteristics for different volumes of oil spill to evaluate the variation in oil concentration at three depths at two sampling stations. The correlations between oil concentration and the main parameters of wave characteristics, oil spill volume, sampling depth, and distance of sampling stations to spill location were assessed. The results revealed that the trend of variation in oil concentration versus wave steepness is linear. The results obtained from experimental measurements indicated that the oil concentrations at mid-depth were 44–77 % and the concentrations near the flume bed were 12–33 % of the concentration near the water surface.     

Clove bud oil: an efficient, economical and widely available oil for the inhibition of wheat seed germination

Pre-harvest sprouting refers to the precocious germination of the grain in the spike prior to harvest as a result of moist weather conditions at harvest time. From the agricultural viewpoint, it is necessary to impose an exogenous dormancy to wheat seeds in order to improve the resistance of seed to pre-harvest sprouting. In this regard, we found that clove bud essential oil is a strong inhibitor for wheat seed germination. The extract obtained from clove bud by supercritical fluid extraction using CO₂ as solvent minimized the number of extracts to two compounds, eugenol and eugenyl acetate. Eugenol, as the main constituent of the oil, was responsible for its strong inhibitory activity in wheat seeds. The aqueous solution of clove bud oil was submitted to germination assay at various concentrations from 50 to 400 mg/L. Complete inhibition of seed germination was recorded when the concentration was 400 mg/L. Roots and sprouts have similar sensitivity to inhibitory effect. In an empirical study, the synergistic cooperation of eugenol and eugenyl acetate from clove bud oil in the inhibition of seed germination was found to be a 1:1 ratio. The clove bud essential oil is widely available and will broaden the horizon of applications for natural and safe inhibitors in the fields.     

An assessment of the risks associated with PCDDs and PCDFs following the application of sewage sludge to agricultural land in the UK

A model has been developed to describe the transfer of PCDDs and PCDFs from sludge-amended soils to the human foodchain. The model is conservative and assumes that all foods consumed by an individual are derived from sludge-amended soils. Predicted concentrations of PCDDs and PCDFs in potatoes, cereals, root vegetables and leafy vegetables were in close agreement with mean concentrations reported in the food survey conducted by MAFF in the UK. Predicted concentrations in milk were well below the Maximum Tolerable Concentration adopted by MAFF. Assuming a half-life of ten years in sludge-amended soils, the maximum estimated incremental daily intake (IDI) predicted by the model following ten applications of sludge to agricultural land was 0.80 pg I-TEQ kg⁻¹ day⁻¹, representing an increase of approximately 45% on current levels of background exposure. For an individual whose diet is solely derived from sludge-amended soils, the total exposure is predicted to be approximately 181 pg I-TEQ day⁻¹ or 2.6 pg I-TEQ kg⁻¹ day⁻¹. This compares with an average background exposure of approximately 2 pg I-TEQ kg⁻¹ day⁻¹, well within the TDI of 10 pg I-TEQ kg⁻¹ day⁻¹ and indicates that the application of sewage sludge to agricultural land under the conditions assumed would not appear to present a significant health risk under the conservative scenarios considered in this assessment.     

Spatial variability of soil <Superscript>137</Superscript>Cs in the South Caspian region

In a comprehensive program of environmental radioactivity survey in South Caspian region,¹³⁷Cs inventories in soil has been measured at more than 50 sites in the Iranian northern province of Guilan. This has been the first wide-range survey of soil radionuclide inventories in the narrow band sensitive ecosystem of south Caspian shore. Radioactivity measurements were carried out using HPGe gamma-spectrometry system. The activity concentration of ¹³⁷Cs in surface soil exhibits a mean value of 17.6 ± 9.4 Bq kg⁻¹, with a range of 2.3–41.7 Bq kg⁻¹. In many sites, split-level sampling method has been applied down to a depth of 20 cm. There were found generally two profiles. Most profiles exhibit a negative exponential distribution, while others revealed a clear subsurface peak in 5–10-cm layer. Cesium deposition in the study area has been estimated to be in the range of 0.38–2.9 kBq m⁻² with a mean value of 1.7 kBq m⁻². Distribution patterns of ¹³⁷Cs concentration levels and deposition values have been estimated using Kriging interpolation method. Observed hotspots in deposition pattern coincide with areas of higher precipitation.     

Simultaneous determination of hydroxylamine and phenol using a nanostructure-based electrochemical sensor

The electrochemical oxidation of hydroxylamine on the surface of a carbon paste electrode modified with carbon nanotubes and 2,7-bis(ferrocenyl ethyl)fluoren-9-one is studied. The electrochemical response characteristics of the modified electrode toward hydroxylamine and phenol were investigated. The results showed an efficient catalytic activity of the electrode for the electro-oxidation of hydroxylamine, which leads to lowering its overpotential. The modified electrode exhibits an efficient electron-mediating behavior together with well-separated oxidation peaks for hydroxylamine and phenol. Also, the modified electrode was used for determination of hydroxylamine and phenol in some real samples.     

Interaction between meteorological parameters and COVID-19: an ecological study on 406 authorities of the UK

Environmental Science and Pollution Research - Understanding the factors affecting COVID-19 transmission is critical in assessing and mitigating the spread of the pandemic. This study investigated...     

Introducing roadside hazard severity indicator based on evidential reasoning approach

Safety experts have, in recent years, been attentive to roadside accident severity and occurrence. Hitherto, to prioritize road segment hazardousness, there have been little efforts to quantify a well defined indicator. In this regard, the existing indicators are usually very plain and the overall configuration of roadside is rated by experts with an exact number describing its condition. Hence, the uncertainties which come with the subjective judgments cannot be regarded as of any substance. This research contribution therefore presents a procedure to assess the road safety (roadside safety indicator) by means of the evidential reasoning (ER) approach. The betterment of ER as opposed to the available procedures for roadside safety assessment is that the proposed approach makes allowance for the uncertainties which may arise from individual judgments. Additionally, when there is a dearth of evidence concerning factors which affect roadside hazardousness severity to collate several roadside segments, this procedure will offer the benefits of utilizing the maximum/minimum utility function. With the aid of the drawn indicator, organizations and agencies responsible for ensuring road safety can reach more flexible decisions to set in-place uncertain planning and road segments priorities. This indicator can also be utilized as a variable to include roadside conditions in crash severity prediction models. A field case study has also been carried out in an attempt to follow and validate the proposed approach which is based on the run-off accident history for a sample road segments. The crash data confirm the suggested indicator.     

Release of salts from municipal solid waste combustion residues

Residues from fluidized bed combustion of municipal solid waste were investigated with respect to their leaching behavior and possible extraction of salts. The total water extractable amounts of Na, K, Ca, Cl(-), Br(-), F(-) and SO(4)(2-) along with the total dissolved solids of bottom, hopper, cyclone and bag house filter ashes were determined. A simple multistage washing process (using water as the extraction medium) was tested in lab scale experiments. The effect of variations in parameters, such as water to ash weight ratio, contact time, temperature and number of extraction steps was investigated. The leaching behavior of untreated and washed cyclone and bag house filter ashes was evaluated by a two-step batch-leaching test, i.e. the CEN test. The ashes investigated in this study can be arranged according to their decreasing water extractable contents and total dissolved solids as follows: filter ash > cyclone ash > hopper ash > bottom ash. A triple extraction with water at liquid to solid ratio 2 and extraction time 5 min gave the best results for the extraction of Ca, Na, K, Cl(-) and SO(4)(2-) from the cyclone as well as from the filter ashes. The leached amounts of salts in the CEN test performed on the washed cyclone ash were considerably lower than the corresponding amounts released from the unwashed ash. Thus, the washed cyclone ash was made more stable with respect to salt leachability. On the other hand, large amounts of salts were leached from the washed filter ashes as well as from unwashed filter ashes. Therefore, it can be concluded that three stage water extraction is not a suitable stabilization method for this type of filter ashes.