Metals, non-metals and PCB in electrical and electronic waste--actual levels in Switzerland

The chemical composition of waste of small electrical and electronic equipment (s-WEEE), a rapidly growing waste stream, was determined for selected metals (Cu, Sb, Hg etc.) and non-metals (Cl, Br, P) and PCBs. During a 3-day experiment, all output products and the s-WEEE input mass flows in a WEEE recycling plant were measured. Only output products were sampled and analyzed. Material balances were established, applying substance flow analysis (SFA). Transfer coefficients for the selected substances were also determined. The results demonstrate the capability of SFA to determine the composition of the highly heterogeneous WEEE for most substances with rather low uncertainty (2 sigma +/- 30%). The results confirm the growing importance of s-WEEE regarding secondary resource metals and potential toxic substances. Nowadays, the thirty times smaller s-WEEE turns over larger flows for many substances, compared to municipal solid waste. Transfer coefficient results serve to evaluate the separation efficiency of the recycling process and confirm--with the exception of PCB and Hg--the limitation of hand-sorting and mechanical processing to separate pollutants (Cd, Pb, etc.) out of reusable fractions. Regularly applied SFA would serve to assess the efficacy of legislative, organizational and technical measures on the WEEE.     

Stoffflussanalyse von quartären Ammoniumverbindungen für die Schweiz

Background, aim, and scope Compared to other micropollutants such as pesticides or pharmaceuticals, less attention has been paid to biocides so far. A prioritisation of the biocides currently used in Switzerland in terms of pollution of waters revealed that quaternary ammonium compounds (QAC), the isothiazolinones chloromethylisothiazolinone and benzisothiazolinone as well as Irgarol exhibit the highest risk potential. The QAC benzalkoniumchloride (BAC) and didecyldimethylammoniumchloride (DDAC-C10) are used in considerable amounts and have a high biological activity. Materials and methods The emissions of selected QAC in waters and soil and the predicted environmental concentrations (PECs) were estimated by means of a substance flow analysis (SFA). The study was based on data from the Swiss products register, on literature, contacts to producers and users as well as on own assumptions. Results and discussion The consumption of BAC (four homologues) and DDAC-C10 in biocidal applications in Switzerland amounts to 90 and 30 tons annually. The most important applications are disinfectants for public health areas, food and feed areas as well as wood preservatives. The total emissions to the environment of all five substances account for approximately 11?t/a. The PECs in surface waters and sediments vary from values slightly lower than the predicted no-effect concentration (PNEC) to roughly three orders of magnitude below the PNEC. However, concentrations above the PNEC are possible at certain locations, particularly downstream of wastewater treatment plants (WWTP) effluents and sewer overflows. Effects on aquatic organisms can therefore not be excluded. Three BAC homologues could not be assessed, as there were no PNEC values available. Conclusions The contribution of emissions from WWTP (punctual emissions) to the environment is only about one tenth and relatively low compared to diffuse emissions. This means that measures for the emission reduction focussing only on end-of-pipe solutions in WWTP will not reduce the emissions significantly. Moreover, for the evaluation of measures, attention has to be paid to the fact that biocides such as the selected QAC are often also applied in non-biocidal applications (e.?g. three times higher volumes in the case of BAC). Recommendations and perspectives SFA serves as a useful tool for early recognition of environmental problems caused by chemicals. This allows recommending appropriate risk reduction measures in the production, the use and the end-of-life phase. It is advisable to use the SFA already in the development stage of chemicals and later on as a quality control tool. The relevant sources of chemicals and sinks in the environment can thus be determined in complex systems, even in absence of extensive measurements or product registers with consumption figures by means of estimations and scenarios.     

Precious metals and rare earth elements in municipal solid waste – Sources and fate in a Swiss incineration plant

In Switzerland many kinds of waste, e.g. paper, metals, electrical and electronic equipment are separately collected and recycled to a large extent. The residual amount of municipal solid waste (MSW) has to be thermally treated before final disposal. Efforts to recover valuable metals from incineration residues have recently increased. However, the resource potential of critical elements in the waste input (sources) and their partitioning into recyclable fractions and residues (fate) is unknown. Therefore, a substance flow analysis (SFA) for 31 elements including precious metals (Au, Ag), platinum metal group elements (Pt, Rh) and rare earth elements (La, Ce, etc.) has been conducted in a solid waste incinerator (SWI) with a state-of-the-art bottom ash treatment according to the Thermo-Re® concept. The SFA allowed the determination of the element partitioning in the SWI, as well as the elemental composition of the MSW by indirect analysis. The results show that the waste-input contains substantial quantities of precious metals, such as 0.4 ± 0.2 mg/kg Au and 5.3 ± 0.7 mg/kg Ag. Many of the valuable substances, such as Au and Ag are enriched in specific outputs (e.g. non-ferrous metal fractions) and are therefore recoverable. As the precious metal content in MSW is expected to rise due to its increasing application in complex consumer products, the results of this study are essential for the improvement of resource recovery in the Thermo-Re® process.     

公众参与市政规划--海岸带管理的一种手段:瑞典西部案例研究

本文分析了公众参与瑞典自然资源管理的4个主要模式,也根据瑞典西海岸两个城市有关沿海资源冲突的经验研究评价了其中一个模式(参与自然环境/空间规划)的优势和不足.与其他行政和规划程序相比,自然规划为协调部门和资源之间土地和水域的管理,也为扩大利益相关者的参与提供了可能性.海岸带管理的地区性影响随着最低的法定条件之外的参与而增加,尽管参与的管理框架和实践需要进一步发展.除了培训专业人员和对现有的程序组合进行实验外,从长远看,使法规适应海岸带综合的和可持续的管理要求是必要的.     

Public participation in municipal planning as a tool for coastal management: case studies from western Sweden

This article analyses four main models of participation in Swedish natural resource management and assesses strengths and weaknesses of one model (participation in physical/spatial planning) based on empirical studies of coastal resource conflicts in two Swedish west coast municipalities. In comparison to other administrative and planning procedures, physical planning offers possibilities to coordinate land and water management across sectors and resources and to broaden stakeholder participation. Local influence on coastal management increases with participation beyond the statutory minimum requirements, although management frameworks and practice of participation need to be developed further. Besides educating professionals and experimenting with combinations of existing procedures, in the long run an adaptation of legislation to the requirements of integrated and sustainable coastal management will be necessary.