Chemical Composition and Acidity of Rain at the Gulf of Iskenderun,North-East Mediterranean

The purpose of the present work was to investigate the chemistry of rain in the Gulf of Iskenderun, North East Mediterranean, Turkey. The Gulf region has a large number of industries. Main industries existing in the region are iron and steel works, fertilizer plants, a cement plant, and several medium and mini size steel mills in addition to the international pipe line terminals. This study aims to apportion the local sources contributing to the overall pollution of the region. To this end a precipitation sampling program was started in January 2000, and over 48 precipitation samples were collected from each of 5 stations located at Iskenderun city center, Iskenderun industrial zone, Payas city center, the campus of Iskenderun Technical College and the campus of Mustafa Kemal University. Samples were analysed for pH, NO₃ ⁺, Cl^-. Ca, Al, Ba, Na, Cd, Co, Cr, Cu, Pb, Li, Mg, Mn, Ni, Zn, Fe, K. Concentrations of metal ions were determined by ICP-AES. NO₃ ^- ions and pH were determined by using NO₃ ^- selective electrode and pH meter, respectively.pH values of the collected samples at the industrial zone and at Payas city center, ranged between 5.02 and 7.38, respectively. NO₃ ^- and metal ions concentrations were highly variable. Concentrations of Ca and Fe ions were higher in the industrial zone and Payas city center. In the other three stations, concentrations of metal ions and NO₃ ^- ion were lower than that of industrial zone and the values of pH ranged between 6 and 7.4. The average pH values at Iskenderun Gulf showed that the precipitation was not acidic, because of the high concentration of Ca. The highest concentrations of Na and Cl ions were recorded in the University campus because the campus is located by the Mediterranean Sea.     

Comparative assessment of municipal wastewater disposal methods in southeast Florida.

A comparative assessment of the risks of three effluent disposal alternatives currently available to wastewater utilities in Southeast Florida is presented in this paper. The alternatives are: deep well injection and ocean outfalls following secondary treatment, and surface water (canal) discharges following secondary wastewater treatment, filtration and nutrient removal. Water quality data, relative to disposal of wastewater treatment plant effluent were gathered, along with water quality data on the receiving waters, from utilities. Comparisons and conclusions regarding potential health concerns associated with the three disposal alternatives are presented. The results indicated that health risks associated with deep wells were generally lower than those of the other two alternatives. The proximity of injection wells to aquifer storage and recovery wells was a determining factor relative to injection well risk. Urban ecological risks were also indicated to be lower, though impacts of urban water use/reuse to the Everglades were not studied. Additional data collection and analysis were recommended to understand the effects of wastewater management on the cycling of water, nutrients and other constituents on southeast Florida. In particular, it was recommended that monitoring of effluents for nitrosamines and pharmaceutically active substances be implemented on a broad scale.     

Probabilistic fugacity analysis of Lake Pontchartrain pollution after Hurricane Katrina

After Hurricane Katrina passed through the US Gulf Coast in August 2005, floodwaters covering New Orleans were pumped into Lake Pontchartrain as part of the rehabilitation process in order to make the city habitable again. The long-term consequences of this environmentally critical decision were difficult to assess at the time and were left to observation. In the aftermath of these natural disasters, and in cases of emergency, the proactive use of screening level models may prove to be an important factor in making appropriate decisions to identify cost effective and environmentally friendly mitigation solutions. In this paper, we propose such a model and demonstrate its use through the application of several hypothetical scenarios to examine the likely response of Lake Pontchartrain to the contaminant loading that were possibly in the New Orleans floodwaters. For this purpose, an unsteady-state fugacity model was developed in order to examine the environmental effects of contaminants with different physicochemical characteristics on Lake Pontchartrain. The three representative contaminants selected for this purpose are benzene, atrazine, and polychlorinated biphenyls (PCBs). The proposed approach yields continuous fugacity values for contaminants in the water, air, and sediment compartments of the lake system which are analogous to concentrations. Since contaminant data for the floodwaters are limited, an uncertainty analysis was also performed in this study. The effects of uncertainty in the model parameters were investigated through Monte Carlo analysis. Results indicate that the acceptable recovery of Lake Pontchartrain will require a long period of time. The computed time range for the levels of the three contaminants considered in this study to decrease to maximum contaminant levels (MCLs) is about 1 year to 68 years. The model can be implemented to assess the possible extent of damage inflicted by any storm event on the natural water resources of Southern Louisiana or similar environments elsewhere. Furthermore, the model developed can be used as a useful decision-making tool for planning and remediation in similar emergency situations by examining various potential contamination scenarios and their consequences.     

Determination of model parameters for zinc (II) ion biosorption onto powdered waste sludge (PWS) in a fed-batch system

Biosorption of zinc (II) ions onto pre-treated powdered waste sludge (PWS) was investigated using a completely mixed tank operating in fed-batch mode instead of an adsorption column. Experiments with variable feed flow rate (0.05-0.5 L h(-1)), feed Zn(II) ion concentrations (37.5-275 mg L(-1)) and amount of adsorbent (1-6 g PWS) were performed using fed-batch operation at pH 5 and room temperature (20-25 degrees C). Break-through curves describing variations of aqueous (effluent) zinc ion concentrations with time were determined for different operating conditions. Percent zinc removal from the aqueous phase decreased, but the biosorbed (solid phase) zinc ion concentration increased with increasing feed flow rate and zinc concentration. A modified Bohart-Adams equation was used to determine the biosorption capacity of PWS (q'(s)) and the rate constant (K) for zinc ion biosorption. Biosorption capacity (q'(s)=57.7 g Zn kg(-1) PWS) of PWS in fed-batch operation was found to be comparable with powdered activated carbon (PAC) in column operations. However, the adsorption rate constant (K=9.17 m(3) kg(-1) h(-1)) in fed-batch operation was an order of magnitude larger than those obtained in adsorption columns because of elimination of mass transfer limitations encountered in the column operations. Therefore, a completely mixed tank operated in fed-batch mode was proven to be more advantageous as compared to adsorption columns due to better contact between the phases yielding faster adsorption rates.     

Genotoxicity study of high aspect ratio silver nanowires

The genotoxicity potential of silver nanowires synthesized via the solution-based polyol method has been investigated. They were found to be non-mutagenic in three Salmonella strains and were not genotoxic in a clastogenicity assay in mice. Residual surfactant was found to have an effect on the toxicological properties of the nanowires by increasing the rate of Ag⁺ release. Residual surfactant can be easily degraded via a UV treatment.