An experimental and a numerical study of horizontal earth-air heat exchanger in a hot climate

Earth-air heat exchangers (EAHE) are devices used in the geothermal technique in order to reduce energy consumption in buildings. In this study, a simulation was conducted through the computational fluid dynamics platform FLUENT 6.3 for the prediction of thermal performance of the EAHE that describes the variation of the air temperature inside the tube. For this, it was necessary to design the heat exchanger while respecting the design and the actual dimensions of the experimental set-up, and stating that the temperature of the wall of the horizontal tube of the exchanger is equal to that of ground at 3 m depth. It should be noted that in assessing the temperature along the two sections vertical (input and output) of the exchanger, opting for a function (UDF) the user define function. Finally, noting a good agreement between both experimental and numerical study, and showing that a significant reduction in temperature at the outlet of the exchanger to a difference of 20 °C, confirming the effectiveness of the heat exchanger.     

Environmental impact and mechanical behavior study of experimental road made with river sediments: recycling of river sediments in road construction

Dredging operations are necessary to maintain harbour activities, to prevent floods, and to restore ecosystem. These sediments after dredging are considered as waste, and their management is a complex problem. In the context of sustainable development, traditional solutions, such as dumping, will be more and more regulated. More than ever with the shortage of aggregates from quarries, dredged sediment could constitute a new granular material source for Civil Engineering domain. The principal objective of this works is to use dredged river sediments in the road construction. This study consists to determine the physical–chemical, geotechnical, and environmental impact characteristics of raw river sediments. To improve the mechanical performance of this river material be used in road construction, a treatment by the hydraulic binder in combination with granular corrector has been proposed. The impacts of the treated material on the environment have been evaluated. The last part of this study focuses on the realization of an experimental road with the designed mixes in the laboratory. The validation of mechanical characteristics and the study of the environmental impacts have been made on core samples from the experimental road. The monitoring of the quality of the percolating water and runoff water has been explored. The obtained results in laboratory and in situ are promising for potential use of river sediments in foundation layer of the road construction.     

Experimental study of new solar air heater design

The suitable design is the most important key to a cost-effective solar air heater. Although there are many techniques that have been proposed to improve the solar air heaters’ performance by means of different turbulence promoters, they cannot ensure a compromise between the cost and the effectiveness. The aim of this study is to find simple and tolerable solution to get rid of the inconvenience resulting from the widely adopted heat-transfer-enhancement techniques by providing an optimized solar air heater design. The proposed design consists of a slightly curved smooth flow channel with an absorber plate of convex shape. A prototype of a curved solar air heater of 1.28 m² collector area was built and tested under summer outdoor conditions in Biskra (Algeria). The performance was evaluated in terms of thermal and effective efficiency for mass flow rates of 0.0172, 0.029, and 0.0472 kg/sm². It is observed that the overall efficiency of this solar air heater is considerably higher in comparison with the efficiency range of the conventional smooth flat plate heaters reported in the literature for similar operating conditions.     

Agri-environmental thresholds using Mehlich III soil phosphorus saturation index for vegetables in histosols

The P concentration in Norton Creek which drains cultivated Histosols in Quebec showed median concentration exceeding up to 14 times the environmental guideline of 0.03 mg total P L(-1). The aim of this study was to develop environmental and agronomic thresholds using soil tests to provide a tool for P management in Histosols. Soil samples were collected from Histosols across Quebec (82) and in fertilizer trials (66) to calibrate soil test methods against the degree of P saturation (DPS(OX)) using the acid-oxalate method and setting alpha(m) = 0.4, and the water-extractable P (P(W)) (Sissingh, 1971). The field trials on crop response to added P were conducted with carrots (8), potatoes (11), onions (10), Chinese cabbage (7), celery (10), and lettuce (20). Relative yields were computed as yield in control without P divided by highest yield with added P. The Mehlich III (M-III) P extraction was more closely related (r(2) = 0.73) to DPS(OX) than the Bray 1 method (r(2) = 0.62) and the Florida extraction method (r(2) = 0.53). The [P/(Al+gammaFe)](M-III) ratio as index of P saturation (IPS(M-III)) was the most closely related to DPS(OX) (r(2) = 0.88) setting gamma = 5. The critical [P/(Al+5Fe)](M-III) ratio of 0.05 at DPS(OX) = 0.25 and P(W) = 9.7 mg P L(-1) was validated by an independent study from North Carolina. The soil group (low- vs. high-IPS(M-III) soils) significantly influenced crop response to added P. Critical agronomic IPS(M-III) values were found between 0.10 and 0.15. Those environmental and agronomic benchmarks are instrumental for managing the P in vegetable-grown Histosols.