Catchment-wide assessment of the cost-effectiveness of stormwater remediation measures in urban areas

The cost effectiveness of catchment-wide funding for the environmental remediation of urban waterways on the scale of a major metropolitan catchment is examined considering the typical land-use and pollutant-export characteristics of urban catchments. The evaluation is performed by comparing the effectiveness of the major stormwater treatment modes for the pollutants of concern with the proportion of pollutant export to which the measure applies. The heavy metals copper, lead, and zinc in the aqueous phase or bound to fine particulates are identified as representative of the pollutants of concern in drainage from urban catchments. The analysis suggests that these priority pollutants are predominantly (79–87%) derived from runoff from residential property and roads as disseminated urban surfaces. Analysis of a specific case of catchment-wide funding of stormwater remediation in the Sydney Harbour catchment, Australia reveals that the funding allocation cannot be expected to have achieved reductions in the loads of priority pollutants due to the types of treatment measures implemented and the sources addressed. The apportionment of funding in better accordance with the maximum potential effectiveness of stormwater treatment modes and the pollutant-export characteristics of urban catchments could thus be expected to achieve a more cost-effective result from such funding initiatives.     

Metals, nutrients and total suspended solids discharged during different flow conditions in highly urbanised catchments

Stormwater discharged from highly urbanised catchments on the southern shore of Sydney estuary, Australia, has been identified as the primary source of contaminants responsible for ecological degradation and reduction in recreational value of the waterway. Effective management of this pollution requires knowledge of contaminant loads associated with various stormwater flow conditions in three highly urbanised catchments in Sydney estuary catchment. The majority (>90%) of metal (Cu, Pb and Zn) and total suspended solid annual loads were contributed during high-flow conditions (>50 mm rainfall day^t1), whereas ≤55% of TN and ≤21% of total phosphorus were contributed to annual loading by dry weather base-flow conditions. All flow conditions posed an in-stream ecological threat because contaminant concentrations exceeded water quality guidelines for all analytes measured, except Pb. Irregular, temporal variability in contaminant concentrations associated with base-flow (within day and amongst days), high-flow (amongst events) and irregular discharges indicated that contaminant contributions in stormwater were strongly controlled by human activity in the three catchments. Significant variation in contaminant concentrations under all flow conditions revealed unique chemical signatures for each catchment despite similarities in land uses, location and geology amongst catchments. These characteristics indicate that assessment and management of stormwater pollution needs to be conducted on an individual-catchment basis for highly urbanised regions of Sydney estuary catchment.     

Physical resuspension and vertical mixing of sediments on a high energy continental margin (Sydney, Australia)

Four sediment cores from the continental margin adjacent to Sydney were analyzed for 210Pb, 137Cs, trace metals (Ag, Cd, Co, Cu, Mn, Ni, Pb, Zn), iron, dry bulk density, mud and moisture content. The concentrations of trace metals in the total sediment are low at all sites, although slightly elevated concentrations of Ag, Cu, Pb and Zn are present in the fine fraction of sediment (< 62.5 microns) near a major ocean outfall. Concentrations of trace metals in the fine fraction of sediment are similar in the upper 10-15 cm, indicating strong vertical mixing of the sediments, whereas an upward coarsening grain size in the upper 1-3 cm of sediment supports physical resuspension during storms. Sediment accumulation rates on the middle shelf adjacent to Sydney were estimated from downcore profiles of 210Pb and 137Cs and range between 0.2 and 0.4 cm yr-1. Although the mass fluxes of Cu, Pb and Zn within a distance of 2 km from the outfall (up to 36.1, 30.8 and 86.2 micrograms cm-2 yr-1, respectively) are greater than 20 km north of the outfall (< 23.5 micrograms cm-2 yr-1), the low concentrations of trace metals in sediments near the outfall support an efficient dispersal of anthropogenic contaminants on this continental margin.     

Small-scale spatial and temporal variance in the concentration of heavy metals in aquatic sediments: a review and some new concepts.

Uncertainty associated with data derived by the analyses of heavy metals in aquatic sediment is due to variance produced in the laboratory (precision), plus 'natural', small-scale spatial variance, (or field variance) at the sampling site. Precision is easily determined and is usually reported in contaminant studies, but field variance is poorly understood and seldom documented. It is important to have an understanding of the field variance because if small-scale spatial variance in the concentration of heavy metals is excessive, regional trends may be limited value. Similarly, if temporal change is large, the results of single synoptic surveys may be questionable and the ability to demonstrate anthropogenic contributions over time will be difficult. However, it is evident from the literature that the information needed to address problems of spatial and temporal variance in the field is beyond the resources of most researchers. Analytical precision of about 5% relative standard deviation (RSD) for heavy metal analysis is typical of a well-managed laboratory. Many studies of small-scale spatial variability made during the current investigation indicate that field variance is related to ambient energy and to the type of sedimentological environment. Total variance (analytical plus field variance) is approximately 10% RSD (mean for a suite of nine trace elements) for depositional parts of estuaries and the marine environment, but increases to about 20-35% RSD for the more dynamic parts of the estuarine environment and the fluvial system. Repeated sampling over periods of up to 7 years undertaken during the present study, indicate a similar order of magnitude for temporal variability in these sedimentological environments. A proposed scheme to provide information on field variance is to undertake small-scale spatial and temporal studies in discrete sedimentological environments in the study area after sediment sampling and characterisation has been completed. The comparatively large proportion of total variance associated with small-scale spatial and temporal variability in the field questions the often excessive cost and effort made in attempting minor reductions in analytical precision in contaminant investigations.     

Modelling the potential damage-reducing benefits of flood warnings using European cases

In most OECD countries, emergency response to accidents and natural disasters is very dependent on a trained workforce of emergency services volunteers: fire, rescue, medical, care and relief. With its large area, sparsely settled population, and frequent periods of low rainfall, Australia is particularly vulnerable to the threat posed by wildfires. There are an estimated 220,000 rural fire volunteers (in a population of 20 million) in eight state and territory volunteer rural fire services. These fire services have experienced significant decreases in volunteer numbers over the past decade, a trend which is true also of North American volunteer fire services. An investigation suggests that the decrease is driven by two related sets of factors: economic and demographic. Globalisation and deregulation of the economy, and technological innovation, have resulted in structural changes in the nature of work: privatisation, casualisation, self-employment, and demands for increased productivity. These factors make it more difficult for members of communities to volunteer, regardless of their motivation to do so. Further, like many other OECD countries, Australia's birth rate has fallen over the last three decades, resulting in a decline in the proportion of the population aged between 25 and 45 years—a trend that is unlikely to be reversed in the foreseeable future. These economic and demographic changes make it difficult for Australian volunteer rural fire agencies to meet their community protection responsibilities. Responding to these challenges may require radical changes in the way that these fire services are organised and supported.     

Use of sedimentary metals to predict metal concentrations in black mussel (Mytilus galloprovincialis) tissue and risk to human health (Sydney estuary, Australia)

Filter-feeding bivalves have been used extensively as an indicator of ecosystem condition and in management of estuarine environments. The current study aimed to determine whether sedimentary metals could predict metal concentrations in tissue of filter-feeding mussels (Mytilus galloprovincialis) and to identify areas of the estuary where mussel consumption posed a human health risk. Mussel tissue Cu and Zn concentrations (wet weight) were below guideline values for human consumption in all parts of the waterway, whereas Pb tissue concentrations exceed these guidelines (2.0 μg?g^?1 wet weight) in the upper reaches of some embayments of the estuary. Concentrations of Cu and Pb in the fine fraction (<62.5 μm) of bottom sediment reasonably predicted concentrations (dry weight) of these metals in mussel tissue (r ²?=?0.460 and p?=?0.001 and r ²?=?0.669 and p?<?0.0001, respectively) as these materials are resuspendable and available to filter-feeding estuarine animals, whereas total sediment and mussel tissue were poorly related. Lead concentrations (>350 μg?g^?1) in fine sediments indicated areas of this estuary where human health was at risk due to high tissue concentrations of this metal. These results give encouragement for the use of the metal concentration in fine sediments as an indicator of estuarine condition and risk to human health in this waterway. Mussels were distributed in all parts of the estuary, even in areas where metal concentrations exceeded sediment quality guidelines.     

Metal accumulation in the greentail prawn, Metapenaeus bennettae, in Sydney and Port Hacking estuaries, Australia

Metal concentrations of the inshore greentail prawn, Metapenaeus bennettae, and surface sediments from locations within Sydney estuary and Port Hacking (Australia) were assessed for bioaccumulation and contamination. The current study aimed to assess metal concentrations in prawn tissue (tail muscle, exoskeleton, hepatopancreas and gills), relate whole body prawn tissue metal concentrations to sediment metal concentrations and animal size, as well as assess prawn consumption as a risk to human health. Metal concentrations were highest in sediment and prawns from contaminated locations (Iron Cove, Hen and Chicken Bay and Lane Cove) in Sydney estuary compared with the reference estuary (Port Hacking). Concentrations in sediments varied considerably between sites and between metals (As, Cd, Cr, Cu, Ni, Pb and Zn), and although concentrations exceeded Interim Sediment Quality Guideline-Low values, metals (As, Cd, Cr, Cu, Ni, Pb and Zn) were below Australian National Health and Medical Research Council human consumption guidelines in prawn tail muscle tissue. Metal concentrations in prawn tail muscle tissue were significantly different (p?≤?0.05) amongst locations for Pb, Zn and Cd, and metal concentrations were generally highest in gills tissue, followed by the hepatopancreas, exoskeleton and tail muscle. The exoskeleton contained the highest Sr concentration; the hepatopancreas contained the highest As, Cu and Mo concentrations; and the gills contained the highest Al, Cr, Fe and Pb concentrations. Concentrations of Pb, As and Sr were significantly different (p?≤?0.05) between size groups amongst locations.     

Soil microbial and faunal community responses to bt maize and insecticide in two soils

The effects of maize (Zea mays L.), genetically modified to express the Cry1Ab protein (Bt), and an insecticide on soil microbial and faunal communities were assessed in a glasshouse experiment. Soil for the experiment was taken from field sites where the same maize cultivars were grown to allow comparison between results under glasshouse conditions with those from field trials. Plants were grown in contrasting sandy loam and clay loam soils, half were sprayed with a pyrethroid insecticide (deltamethrin) and soil samples taken at the five-leaf stage, flowering, and maturity. The main effect on all measured parameters was that of soil type and there were no effects of Bt trait or insecticide on plant growth. The Bt trait resulted in more soil nematodes and protozoa (amoebae), whereas insecticide application increased plant Bt concentration and altered nematode community structure. The only significant effects on soil microbial community structure, microarthropods, and larvae of a nontarget root-feeding Dipteran, were due to soil type and plant growth stage. The results indicate that, although there were statistically significant effects of the Bt trait on soil populations, they were small. The relative magnitude of the effect could best be judged by comparison with the insecticide treatment, which was representative of current best practice. The Bt trait had no greater effect than the insecticide treatment. Results from this glasshouse experiment were in broad agreement with conclusions from field experiments using the same plant material grown in the same soils.     

Metallic and organic contaminants in sediments of Sydney Harbour, Australia and vicinity-- a chemical dataset for evaluating sediment quality guidelines

An internally consistent dataset comprising 103 surficial estuarine sediment samples were collected from Sydney Harbour, Australia and locations south of Sydney. This paper describes the chemical characteristics of the dataset and evaluates its suitability for use in evaluating biological effects-based sediment quality guidelines (SQGs). The sediments contained mixtures of chemicals, the most prevalent chemical classes being metals and polycyclic aromatic hydrocarbons, whereas sediments from coastal lakes/estuaries south of Sydney had low concentrations of contaminants. Maximum concentrations of the prevalent contaminants zinc, lead, copper and pyrene were 11,300, 1,420, 1,060 mg kg(-1) and 23,300 microg kg(-1), respectively. For the majority of samples, concentrations of individual chemicals exceeded most effects-based SQGs that have been adopted for use in Australia, implying occasional or frequent adverse biological effects are expected. Comparing mixtures of contaminants to ranges in numbers of SQGs exceeded and mean SQG quotients showed that most samples (57% to 68%) had contamination characteristics associated with moderate probabilities (30% to 52%) of acute toxicity, based on North American data. A smaller proportion of samples (15% to 17%) had contamination characteristics associated with high probabilities (74% to 85%) of toxicity. The wide range of chemicals and concentrations, associated with low, medium and high probabilities of toxicity, indicated that the dataset was suitable for future use in evaluating predictive abilities of SQGs. This is relevant, given the recent introduction of North American-derived SQGs for Australia.