Effects of Topographical Heterogeneity and Dispersal Limitation on Species Turnover in a Temperate Mountane Ecosystem: a Case Study in the Henan Province,China

Species turnover patterns can be inconsistent due to differences in the dispersal ability of different growth forms. Here, species of trees, shrubs, herbs, and bryophytes in the Xiaoqinling National Nature Reserve in China were analyzed to determine patterns of species turnover along an elevation and spatial gradient. Variance partitioning was used to assess the relative contribution of topographic heterogeneity and dispersal limitation to species turnover. Our results suggest that the effect of dispersal limitation is more important than topographic heterogeneity on species turnover in temperate mountane ecosystems in the study area. Dispersal limitation has a greater effect on trees species turnover than on shrubs, herbs or bryophytes species turnover.     

EGSB出水回流对EGSB—SBR工艺处理果汁废水的影响

采用EGSB—SBR工艺处理实际果汁废水(COD 2 608~6 500 mg/L,p H 5.0~7.0)。在EGSB反应器成功启动及驯化完成的情况下,连续运行49 d。实验结果表明:第25天起,控制EGSB回流比为3.00∶1,EGSB反应器可在无须添加Na HCO3的条件下稳定运行,从而降低了废水处理成本;第25天起,平均进水COD,BOD5,SS分别为5 968,2 130,1 020 mg/L,平均出水COD,BOD5,SS分别降至131,11,50 mg/L,平均COD,BOD5,SS去除率分别为98%,99%,95%;组合工艺对该实际果汁废水具有良好的处理效果。     

Designing a policy package for the promotion of servicising: A case study of vineyard crop protection in Galicia (Spain)

The servicising approach in vineyard protection is considered a valid alternative to achieve decoupling between the economic and environmental performance of viticulture. In this paper, a policy package is designed to promote the uptake of a servicised model of vineyard protection in an area of smallholding viticulture. In doing so, a specific methodology based on a step by step protocol has been followed that aims to come up with a package that is effective, implementable and socially as well as politically acceptable. The paper concludes on the importance of combining several policy instruments in a policy package to realise the political objective. The proposed viable policy package includes incentives that support the companies’ shift towards offering crop protection solutions, further development of IPM solutions and instruments that encourage farmers to reduce the use of pesticides and collectively hire crop protection services.     

深水河大桥桥墩边坡稳定性分析

深水河大桥桥墩边坡地处广乐高速深水河大桥段,其稳定性直接关系着桥墩桩基工程能否顺利施工和整段广乐高速的工程进度。本文采用定性分析和定量计算的方法对深水河大桥桥墩边坡稳定性进行了分析,定性分析主要是通过赤平投影法作图初步分析边坡局部可能出现的组合滑面破坏模式,再取典型的楔形体进行破坏模式分析,定量计算主要是采用Bishop法分别计算该边坡在不同工况下的稳定系数,从而对该边坡的整体稳定性进行评价,以便提出相应的治理措施。     

Dimensional analysis and scaling in mechanical mixing for fabrication of metal matrix nanocomposites

For a successful enhancement of mechanical properties of metal matrix nanocomposites, a homogeneous nanoparticle dispersion and distribution in the solidified metal is required. Mechanical mixing can be used for initial break-up of agglomerates, and its study can be simplified with dimensional analysis. Using this technique, mixing time and vortex height were assessed while varying fluid properties, impeller angle, and angular speed. Three relevant dimensionless numbers were recognized: the Reynolds (Re), Froude and Galilei (Ga) numbers. Based on blade and impeller shaft angles, a modified Froude number (Fr*) was defined. These parameters were calculated experimentally, varying angular speed from 200 to 1000 rpm for three different impeller angles: 0°, 15° and 30°. This procedure was performed with three fluids: water, and two aqueous glycerin solutions (25% and 50% by volume). Digital images were taken and processed to measure vortex height. Mixing time was measured for water at 0° impeller angle, angular speed ranging from 200 to 1200 rpm. Results showed an optimal dimensionless mixing time with respect to Re. A linear relationship was found between dimensionless vortex height and Fr*. The first had a second order polynomial relationship with the product ReFr*, regardless of impeller angle. This relationship, together with the Ga, specific for each fluid, allows scaling the results to other fluids such as molten pure aluminum. This study allows experimenting in simpler systems that involve transparent fluids, room temperature and low cost, to then elaborate a prediction of vortex height in fluids where measurements are difficult and costly, such as molten metals.     

厦门地震台数字化观测误处理事件分析及预防

通过分析厦门地震台数字化观测中出现的误处理事件,查找出诸多原因,如预处理软件存在BUG、数据处理方法不当、电源故障等。也提出一些预防办法。     

OSHA职业伤害与疾病记录和报告机制简介

介绍了OSHA《记录和报告职业伤害与疾病》法规的主要内容,分析了中国引入该法规的益处。     

呼和浩特市工业料堆扬尘排放清单研究

颗粒物污染是影响中国城市空气质量的首要因素。工业料堆扬尘是城市大气颗粒物污染的主要来源之一。本文通过对呼和浩特市建成区内典型行业风蚀、作业及交通运输扬尘进行采样分析,应用美国AP-42提供的模型,以2006年作为基准年,建立了呼和浩特市工业料堆排放清单。研究结果表明:呼和浩特市建成区内工业料堆扬尘排放量为TSP:5 305 t/a,PM10:1 012 t/a,PM2.5:267 t/a。从空间分布看玉泉区工业料堆扬尘排放量最大,其次是赛罕区。行业分布上排放最大的行业是建材工业,其次是电力热力工业,最少的是化工工业。在各行业类别的工业料堆排放量中,交通运输扬尘排放量是最大的。     

中国石灰生产和能源消耗分析

基于全国涉及石灰生产的企业全口径统计数据,分析中国2007年石灰生产的基本特征,探讨了石灰产量统计的不确定性和来源。2007年,中国石灰生产的企业共6 154家,涉及9 327座石灰窑。总产能为2.27亿t,共生产石灰1.06亿t,企业平均产量为4 000 t/a,企业生产每吨石灰平均能耗水平为163 kg标准煤。中国约有两千八百多万吨的石灰生产很难通过正规渠道统计上来,也意味着这些产量很可能是基于非常简易和高能耗的石灰土窑生产的。