Sorption of the veterinary antimicrobials sulfadimethoxine and ormetoprim in soil

Currently, limited research on the fate of antimicrobials in the environment exists, once they are discharged in human and animal wastes. Sorption of two antimicrobials, sulfadimethoxine (SDM) and ormetoprim (OMP), was investigated in two soils and sand using a series of batch experiments. Because OMP and SDM are often administered in combination, their sorption was also investigated in combination as co-solutes. The rate of SDM and OMP sorption was rapid over the first few hours of the experiments, which then slowed considerably after 16 to 68 h. OMP sorption was enhanced at high concentrations when in combination with SDM, with linear sorption coefficients ranging from 1.3 to 58.3 L.kg(-1) in the single solute experiments and 4.96 to 89.7 L.kg(-1) in the co-solute experiments. Sorption of OMP as a single solute seems to provide a better fit with the Freundlich equation, which became more linear (n approached 1) when SDM was present. Overall, SDM sorbed less than OMP in the two soils and sand. SDM linear sorption coefficients ranged from 0.4 to 25.8 L.kg(-1) as a single solute and 2.5 to 22.1 L.kg(-1) as a co-solute. Sorption of SDM becomes more nonlinear (n < 1) when SDM is present in combination with OMP. Overall, sorption of both antimicrobials increased in the selected soils and sand as the organic matter, clay content, and cation exchange capacity increased. These experiments indicate relatively low sorption of SDM and OMP in natural soils, making them a potential threat to surface and ground water.     

An analysis of assessment outcomes from eight years' operation of the Australian border weed risk assessment system

The majority of Australian weeds are exotic plant species that were intentionally introduced for a variety of horticultural and agricultural purposes. A border weed risk assessment system (WRA) was implemented in 1997 in order to reduce the high economic costs and massive environmental damage associated with introducing serious weeds. We review the behaviour of this system with regard to eight years of data collected from the assessment of species proposed for importation or held within genetic resource centres in Australia. From a taxonomic perspective, species from the Chenopodiaceae and Poaceae were most likely to be rejected and those from the Arecaceae and Flacourtiaceae were most likely to be accepted. Dendrogram analysis and classification and regression tree (TREE) models were also used to analyse the data. The latter revealed that a small subset of the 35 variables assessed was highly associated with the outcome of the original assessment. The TREE model examining all of the data contained just five variables: unintentional human dispersal, congeneric weed, weed elsewhere, tolerates or benefits from mutilation, cultivation or fire, and reproduction by vegetative propagation. It gave the same outcome as the full WRA model for 71% of species. Weed elsewhere was not the first splitting variable in this model, indicating that the WRA has a capacity for capturing species that have no history of weediness. A reduced TREE model (in which human-mediated variables had been removed) contained four variables: broad climate suitability, reproduction in less or than equal to 1year, self-fertilisation, and tolerates and benefits from mutilation, cultivation or fire. It yielded the same outcome as the full WRA model for 65% of species. Data inconsistencies and the relative importance of questions are discussed, with some recommendations made for improving the use of the system.     

Characterization of on-road vehicle emission factors and microenvironmental air quality in Beijing,China

In this paper, we report the results and analysis of a recent field campaign in August 2007 investigating the impacts of emissions from transportation on air quality and community concentrations in Beijing, China. We conducted measurements in three different environments, on-road, roadside and ambient. The carbon monoxide, black carbon and ultrafine particle number emission factors for on-road light-duty vehicles are derived to be 95 g kg^?1-fuel, 0.3 g kg^?1-fuel and 1.8 × 10¹⁵ particles kg^?1-fuel, respectively. The emission factors for on-road heavy-duty vehicles are 50 g kg^?1-fuel, 1.3 g kg^?1-fuel and 1.1 × 10¹⁶ particles kg^?1-fuel, respectively. The carbon monoxide emission factors from this study agree with those derived from remote sensing and on-board vehicle emission testing systems in China. The on-road black carbon and particle number emission factors for Chinese vehicles are reported for the first time in the literature. Strong traffic impacts can be observed from the concentrations measured in these different environments. Most clear is a reflection of diesel truck traffic activity in black carbon concentrations. The comparison of the particle size distributions measured at the three environments suggests that the traffic is a major source of ultrafine particles. A four-day traffic control experiment conducted by the Beijing Government as a pilot to test the effectiveness of proposed controls was found to be effective in reducing extreme concentrations that occurred at both on-road and ambient environments.     

Science and the Consequences of Mistruct: Lessons from Recent GM Controversies

In 2001, it was announced thattransgenic DNA had introgressed intotraditional strains of maize in Mexico. Acontroversy erupted and raged throughout 2001and 2002. This episode represents an acutebreakdown in scientific discourse. Given thestakes in the genetically modified organismdebate, a breakdown in scientific discourse isalarming. The following inquiry looks into thecauses of this breakdown. Ultimately, it willbe argued that the underlying problem is thecurrent institutional structure of science,particularly in the United States. If thediagnosis is correct, then the proper course oftreatment is to pursue a program ofinstitutional reconstruction.     

Three-fluid retention in porous media involving water, PCE and air

A classical way to obtain three-fluid retention curves in porous media from measured two-fluid retention curves is based on the Leverett concept, which states that the total volumetric liquid content in a water-wet porous medium, containing water, a nonaqueous-phase liquid (NAPL) and air, is a function of the capillary pressure across the interface between the continuous NAPL and air. This functional relationship results from the assumed condition that in a three-fluid porous medium, the intermediate wetting fluid spreads over the water-air interface. Application of Leverett's concept may not be valid, however, for nonspreading NAPLs like perchloroethylene (PCE). This paper discusses measurements of both PCE-air and water-PCE-air retention curves using a long vertical column in conjunction with a dual-energy gamma radiation system. The data indicate that the Leverett concept was applicable only until a critical PCE saturation had been reached.     

Surfactant enhanced recovery of tetrachloroethylene from a porous medium containing low permeability lenses. 1. Experimental studies

A matrix of batch, column and two-dimensional (2-D) box experiments was conducted to investigate the coupled effects of rate-limited solubilization and layering on the entrapment and subsequent recovery of a representative dense NAPL, tetrachloroethylene (PCE), during surfactant flushing. Batch experiments were performed to determine the equilibrium solubilization capacity of the surfactant, polyoxyethylene (20) sorbitan monooleate (Tween 80), and to measure fluid viscosity, density and interfacial tension. Results of one-dimensional column studies indicated that micellar solubilization of residual PCE was rate-limited at Darcy velocities ranging from 0.8 to 8.2 cm/h and during periods of flow interruption. Effluent concentration data were used to develop effective mass transfer coefficient (Ke) expressions that were dependent upon the Darcy velocity and duration of flow interruption. To simulate subsurface heterogeneity, 2-D boxes were packed with layers of F-70 Ottawa sand and Wurtsmith aquifer material within 20-30 mesh Ottawa sand. A 4% Tween 80 solution was then flushed through PCE-contaminated boxes at several flow velocities, with periods of flow interruption. Effluent concentration data and visual observations indicated that both rate-limited solubilization and pooling of PCE above the fine layers reduced PCE recovery to levels below those anticipated from batch and column measurements. These experimental results demonstrate the potential impact of both mass transfer limitations and subsurface layering on the recovery of PCE during surfactant enhanced aquifer remediation.     

A constitutive model for air-NAPL-water flow in the vadose zone accounting for immobile, non-occluded (residual) NAPL in strongly water-wet porous media

A hysteretic constitutive model describing relations among relative permeabilities, saturations, and pressures in fluid systems consisting of air, nonaqueous-phase liquid (NAPL), and water is modified to account for NAPL that is postulated to be immobile in small pores and pore wedges and as films or lenses on water surfaces. A direct outcome of the model is prediction of the NAPL saturation that remains in the vadose zone after long drainage periods (residual NAPL). Using the modified model, water and NAPL (free, entrapped by water, and residual) saturations can be predicted from the capillary pressures and the water and total-liquid saturation-path histories. Relations between relative permeabilities and saturations are modified to account for the residual NAPL by adjusting the limits of integration in the integral expression used for predicting the NAPL relative permeability. When all of the NAPL is either residual or entrapped (i.e., no free NAPL), then the NAPL relative permeability will be zero. We model residual NAPL using concepts similar to those used to model residual water. As an initial test of the constitutive model, we compare predictions to published measurements of residual NAPL. Furthermore, we present results using the modified constitutive theory for a scenario involving NAPL imbibition and drainage.     

Iron-rich Oklahoma clays as a natural source of chromium in monitoring wells

Water samples, drawn from groundwater monitoring wells located southeast of Oklahoma City, OK, were found to contain elevated concentrations of total chromium with an apparent source localized to the area surrounding each well. Since these monitoring wells are located in areas with no historic chromium usage, industrial sources of chromium were ruled out. Water testing was performed on twelve monitoring wells in the area that historically had elevated total chromium concentrations ranging from 10-4900 micrograms per litre. Filtered water samples were found to be free of chromium contamination, indicating that the source of the chromium is the suspended solids. Analysis of these solids by acid digestion and a sequential extraction technique revealed that the chromium was primarily associated with iron-containing solids. X-ray diffraction identified goethite, an iron oxide hydroxide, as the dominant iron-containing phase in the suspended solids. The mineralogy in this region is dominated by interbedded red-bed sandstone and mudstone whose mineral content includes mixed-layer illite-smectite, hematite, goethite, gypsum and dolomite. Elemental analysis of soil samples collected as a function of depth in the locale of the monitoring wells indicated that the iron rich clays contain a natural source of chromium. The elevated levels of total chromium are most likely due to the dissolution of silica and alumina from the chromium containing iron clays in the basic well water, resulting in the release of fine suspended solids that naturally have high chromium concentrations. These results should be applicable to other areas containing iron-rich clays.     

Detection of nitro-polycyclic aromatic hydrocarbons in mainstream and sidestream tobacco smoke using electron monochromator-mass spectrometry

For the first time, we show the presence of nitro substituted naphthalenes in both mainstream and sidestream tobacco smoke using electron monochromator-mass spectrometry. Only one mainstream smoke sample showed the presence of 1-nitronaphthalene (1-NN) at 20 pg/cigarette, while all of the sidestream smoke samples showed the presence of 1-NN at levels ranging from 0.40 to 0.60 ng/cigarette and 2-NN at quantities ranging from 1 to 2 ng/cigarette. Additionally, these levels showed a ratio of ~1:3 for 1-NN to 2-NN which demonstrates that the formation of 2-NN is favored under sidestream combustion conditions. No larger ring structure (>2) nitro-aromatics were identified.