Hybrid governance tensions fuelling self-reflexivity in Alternative Food Networks: the case of the Brussels GASAP (solidarity purchasing groups for peasant agriculture)

This paper applies the concept of Hybrid Governance to the analysis of the GASAP (Groupe d’Achats Solidaires de l’Agriculture Paysanne), a solidarity-based producers–consumers network established in Brussels in 2006. The Hybrid Governance concept allows to capture the role of key governance tensions in driving the self-organisation, scaling out and self-reflexive dynamics of Alternative Food Networks (AFNs). The approach provides a multifaceted and sound socio-political account of the ways AFNs arise, self-organise, associate and build networks in the pursuit of their food allocation objectives, often facing a contradictory socio-institutional environment. Three types of governance tensions, i.e. organisational, resource, and institutional, as well as the interactions among them, are analysed throughout the life-course of the GASAP network. The analysis identifies three phases in the GASAP’s life-course, showing how governance tensions and their interrelations arise and play a critical role in conditioning the overall development of the organisation through time. The paper concludes with highlighting prospective values of the hybrid governance approach for the analysis of AFNs in general. These values relate to: the role of the hybrid approach in illuminating on key drivers behind the scaling out of AFNs; the hybrid governance as a tool to conceptualise and sustain the self-reflexive capacity of local food initiatives and the ways by which this approach unravels challenges to build cooperative alliances and networks among a diversity of agents in the food arena.     

THOR dummy chest deflection response in oblique and lateral far-side sled tests

Abstract

Objective: The focus of this study is side impact. Though occupant injury assessment and protection in nearside impacts has received considerable attention and safety standards have been promulgated, field studies show that a majority of far-side occupant injuries are focused on the head and thorax. The 50th percentile male Test Device for Human Occupant Restraint (THOR) has been used in oblique and lateral far-side impact sled tests, and regional body accelerations and forces and moments recorded by load cells have been previously reported. The aim of this study is to evaluate the chestband-based deflection responses from these tests.

Methods: The 3-point belt–restrained 50th percentile male THOR dummy was seated upright in a buck consisting of a rigid flat seat, simulated center console, dashboard, far-side side door structure, and armrest. It was designed to conduct pure lateral and oblique impacts. The center console, dashboard, simulated door structure, and armrest were covered with energy-absorbing materials. A center-mounted airbag was mounted to the right side of the seat. Two 59-gage chestbands were routed on the circumference of the thorax, with the upper and lower chestbands at the level of the third and sixth ribs, respectively, following the rib geometry. Oblique and pure lateral far-side impact tests with and without airbags were conducted at 8.3 m/s. Maximum chest deflections were computed by processing temporal contours using custom software and 3 methods: Procedures paralleling human cadaver studies, using the actual anchor point location and actual alignment of the InfraRed Telescoping Rods for the Assessment of Chest Compression (IR-TRACC) in the dummy on each aspect—that is, right or left,—and using the same anchor location of the internal sensor but determining the location of the peak chest deflection on the contour confined to the aspect of the sensor; these were termed the SD, ID, and TD metrics, respectively.

Results: All deformation contours at the upper and lower thorax levels and associated peak deflections are given for all tests. Briefly, the ID metrics were the lowest in magnitude for both pure lateral and oblique modes, regardless of the presence or absence of an airbag. This was followed by the TD metric, and the SD metric produced the greatest deflections.

Conclusion: The chestbands provide a unique opportunity to compute peak deflections that parallel current IR-TRACC-type deflections and allow computation of peak deflections independent of the initial point of attachment to the rib. The differing locations of the peak deflection vectors along the rib contours for different test conditions suggest that a priori attachment is less effective. Further, varying magnitudes of the differences between ID and TD metrics underscore the difficulty in extrapolating ID outputs under different conditions: Pure lateral versus oblique, airbag presence, and thoracic levels. Deflection measurements should, therefore, not be limited to an instrument that can only track from a fixed point. For improved predictions, these results suggest the need to investigate alternative techniques, such as optical methods to improve chest deflection measurements for far-side occupant injury assessment and mitigation.     

Forecasting the e ects of EU policy measures on the nitrate pollution of groundwater and surface waters

We used the interdisciplinary model network REGFLUD to predict the actual mean nitrate concentration in percolation water at the scale of the Weser river basin (Germany) using an area di erentiated (100 m 100 m) approach. REGFLUD combines the agro-economic model RAUMIS for estimating nitrogen surpluses and the hydrological models GROWA/DENUZ for assessing the nitrate leaching from the soil. For areas showing predicted nitrate concentrations in percolation water above the European Union (EU) groundwater quality standard of 50 mg NO3-N/L, e ective agri-environmental reduction measures need to be derived and implemented to improve groundwater and surface water quality by 2015. The e ects of already implemented agricultural policy are quantified by a baseline scenario projecting the N-surpluses from agricultural sector to 2015. The REGFLUD model is used to estimate the e ects of this scenario concerning groundwater and surface water pollution by nitrate. From the results of the model analysis the needs for additional measures can be derived in terms of required additional N-surplus reduction and in terms of regional prioritization of measures. Research work will therefore directly support the implementation of the Water Framework Directive of the European Union in the Weser basin.     

Forecasting the effects of EU policy measures on the nitrate pollution of groundwater and surface waters

We used the interdisciplinary model network REGFLUD to predict the actual mean nitrate concentration in percolation water at the scale of the Weser river basin (Germany) using an area differentiated (100 m × 100 m) approach.REGFLUD combines the agro-economic model RAUMIS for estimating nitrogen surpluses and the hydrological models GROWA/DENUZ for assessing the nitrate leaching from the soil.For areas showing predicted nitrate concentrations in percolation water above the European Union (EU) groundwater quality standard of 50 mg NO 3 -N/L,effective agri-environmental reduction measures need to be derived and implemented to improve groundwater and surface water quality by 2015.The effects of already implemented agricultural policy are quantified by a baseline scenario projecting the N-surpluses from agricultural sector to 2015.The REGFLUD model is used to estimate the effects of this scenario concerning groundwater and surface water pollution by nitrate.From the results of the model analysis the needs for additional measures can be derived in terms of required additional N-surplus reduction and in terms of regional prioritization of measures.Research work will therefore directly support the implementation of the Water Framework Directive of the European Union in the Weser basin.     

Geometric variability and surface finish of weld zones in Yb:YAG laser welded advanced high strength steels

Laser welding is used for joining advanced high strength steels (AHSS) to improve formability and performance. In this paper, the geometric variability observed in the fusion zones and heat affected zones of several combinations of AHSS (different types, coatings and thicknesses), which were butt welded using a Trumpf TRUDISK 6000^® Yb:YAG laser beam, is presented. The surface texture parameters such as roughness and waviness of laser welds were also measured and correlated with geometric variability. Results indicate that although high quality welds with minimal defects can be obtained using the Yb:YAG laser welding process, there is considerable variation in both the shape and the dimensions of weld zones. The variability increased with an increase in thickness differentials between the sheets being welded. Analysis of the top of the weld surfaces also suggested that aluminum coating on USIBOR samples contributes significantly to increased roughness. An increase in laser power coupled with corresponding increase in welding speed did not impact variability. A fair correlation between the surface roughness and weld region variability exists, although this needs further study.     

Anatomic and acoustic sexual dimorphism in the sound emission system of Phoenicoprocta capistrata (Lepidoptera: Arctiidae)

Both sexes of Phoenicoprocta capistrata have functional tymbals. The scanning electron microscopy revealed differences in the morphology of these organs in males and females. Male tymbals have a well-developed striated band, constituted by 21 ± 2 regularly arranged striae whereas female tymbals lack a striated band. This type of sexual dimorphism is rare in Arctiidae. The recording of the sound produced by moths held by the wings revealed that while males produced trains of pulses organized in modulation cycles, females produced clicks at low repetition rate following very irregular patterns. Statistically, there are differences between sexes in terms of the duration of pulses, which were 355 ± 24 μs in the case of males and 289 ± 29 μs for females. The spectral characteristics of the pulses also show sexual dimorphism. Male pulses are more tuned (Q ₁₀ = 5.2 ± 0.5) than female pulses (Q ₁₀ = 2.7 ± 0.5) and have a higher best frequency (42 ± 1 kHz vs. 29 ± 2 kHz). To our knowledge, this is the first report on an arctiid moth showing sexual dimorphism in tymbal’s anatomy that leads to a best frequency dimorphism. Males produce sound at mating attempts. The sounds recorded during mating are modulation cycles with the same spectral characteristics as those recorded when males are held by the wings. The morphological and acoustic features of female tymbals could indicate a process of degeneration and adaptation to conditions under which the emission of complex patterns is not necessary. Frank Coro no longer works at Universidad de La Habana.     

Charles Darwin, beetles and phylogenetics

Here, we review Charles Darwin’s relation to beetles and developments in coleopteran systematics in the last two centuries. Darwin was an enthusiastic beetle collector. He used beetles to illustrate different evolutionary phenomena in his major works, and astonishingly, an entire sub-chapter is dedicated to beetles in “The Descent of Man”. During his voyage on the Beagle, Darwin was impressed by the high diversity of beetles in the tropics, and he remarked that, to his surprise, the majority of species were small and inconspicuous. However, despite his obvious interest in the group, he did not get involved in beetle taxonomy, and his theoretical work had little immediate impact on beetle classification. The development of taxonomy and classification in the late nineteenth and earlier twentieth century was mainly characterised by the exploration of new character systems (e.g. larval features and wing venation). In the mid-twentieth century, Hennig’s new methodology to group lineages by derived characters revolutionised systematics of Coleoptera and other organisms. As envisioned by Darwin and Ernst Haeckel, the new Hennigian approach enabled systematists to establish classifications truly reflecting evolution. Roy A. Crowson and Howard E. Hinton, who both made tremendous contributions to coleopterology, had an ambivalent attitude towards the Hennigian ideas. The Mickoleit school combined detailed anatomical work with a classical Hennigian character evaluation, with stepwise tree building, comparatively few characters and a priori polarity assessment without explicit use of the outgroup comparison method. The rise of cladistic methods in the 1970s had a strong impact on beetle systematics. Cladistic computer programs facilitated parsimony analyses of large data matrices, mostly morphological characters not requiring detailed anatomical investigations. Molecular studies on beetle phylogeny started in the 1990s with modest taxon sampling and limited DNA data. This has changed dramatically. With very large data sets and high throughput sampling, phylogenetic questions can be addressed without prior knowledge of morphological characters. Nevertheless, molecular studies have not lead to the great breakthrough in beetle systematics—yet. Especially the phylogeny of the extremely species rich suborder Polyphaga remains incompletely resolved. Coordinated efforts of molecular workers and of morphologists using innovative techniques may lead to more profound insights in the near future. The final aim is to develop a well-founded phylogeny, which truly reflects the evolution of this immensely species rich group of organisms.     

海水中痕量元素测定及其在重金属污染源判别方面的应用

利用电感耦合等离子体质谱(ICP-MS)研究了胶州湾及莱州湾这两个海域中痕量元素污染水平,发展了ICP-MS海水环境中痕量元素的测定方法,同时找出海水环境中具有保守性的数种元素作为污染示踪元素.达到对于海水环境中痕量污染物被动示踪的目的.对18个真实样品进行了识别率试验,识别率可达90%以上,在选取3个海水样品及1个河水样品混合后的模拟分担率实验,也取得了满意的结果,其误差平均值仅有1.17%.     

Effect of C/N ratio, aeration rate and moisture content on ammonia and greenhouse gas emission during the composting

Gaseous emission (N₂O, CH₄ and NH₃) from composting can be an important source of anthropogenic greenhouse gas and air pollution. A laboratory scale orthogonal experiment was conducted to estimate the effects of C/N ratio, aeration rate and initial moisture content on gaseous emission during the composting of pig faeces from Chinese Ganqinfen system. The results showed that about 23.9% to 45.6% of total organic carbon (TOC) was lost in the form of CO₂ and 0.8% to 7.5% of TOC emitted as CH₄. Most of the nitrogen was lost in the form of NH₃, which account for 9.6% to 32.4% of initial nitrogen. N₂O was also an important way of nitrogen losses and 1.5% to 7.3% of initial total nitrogen was lost as it. Statistic analysis showed that the aeration rate is the most important factor which could affect the NH₃ (p = 0.0189), CH₄ (p = 0.0113) and N₂O (p = 0.0493) emissions significantly. Higher aeration rates reduce the CH₄ emission but increase the NH₃ and N₂O losses. C/N ratio could affect the NH₃ (p = 0.0442) and CH₄ (p = 0.0246) emissions significantly, but not the N₂O. Lower C/N ratio caused higher NH₃ and CH₄ emissions. The initial moisture content can not influence the gaseous emission significantly. Most treatments were matured after 37 days, except a trial with high moisture content and a low C/N ratio.     

Chemical Leasing business models and corporate social responsibility

Chemical Leasing is a service-oriented business model that shifts the focus from increasing sales volume of chemicals towards a value-added approach. Recent pilot projects have shown the economic benefits of introducing Chemical Leasing business models in a broad range of sectors. A decade after its introduction, the promotion of Chemical Leasing is still predominantly done by the public sector and international organizations. We show in this paper that awareness-raising activities to disseminate information on this innovative business model mainly focus on the economic benefits. We argue that selling Chemical Leasing business models solely on the grounds of economic and ecological considerations falls short of branding it as a corporate social responsibility initiative, which, for this paper, is defined as a stakeholder-oriented concept that extends beyond the organization’s boundaries and is driven by an ethical understanding of the organization’s responsibility for the impact of its business activities. For the analysis of Chemical Leasing business models, we introduce two case studies from the water purification and metal degreasing fields, focusing on employees and local communities as two specific stakeholder groups of the company introducing Chemical Leasing. The paper seeks to demonstrate that Chemical Leasing business models can be branded as a corporate social responsibility initiative by outlining the vast potential of Chemical Leasing to improve occupational health and safety and to strengthen the ability of companies to protect the environment from the adverse effects of the chemicals they apply.