Analysis and residue levels of forchlorfenuron (CPPU) in watermelons

This paper describes the application of liquid chromatography-tandem mass spectrometry (LC/MS-MS) for analysis of residues of forchlorfenuron (CPPU), a new plant growth regulator, in watermelons, after a sample preparation step based on the buffered Quick, Easy, Cheap, Effective, Rugged and Safe extraction method. Analytical determinations were carried out in a triple quadrupole system fitted with an electrospray interphase operating in the positive ionisation mode (ESI+). Three simultaneous MS-MS transitions of the quasi-molecular ion m/z 248 (precursor ion) were monitored for data acquisition (248 > 129, 248 > 155, and 248 > 248), using the transition 248 > 129 for quantitation. Recovery studies on watermelons at levels of 1-200 microg/kg, performing five replicates at each level and using bracketing single-level calibration with matrix-matched standards for quantitation, gave forchlorfenuron mean recoveries ranging from 82 to 106% with relative standard deviations (RSD) lower than 18%. The limit of determination was established at 1 microg/kg. The method was applied to evaluate the persistence of forchlorfenuron residues in watermelons grown in plastic greenhouses, after applying an individual spray treatment to the flower ovary at the anthesis stage (45 mu g/flower and 60 mu g/flower for cv "Extazy" and cv "reina de corazones" watermelons, respectively). One month after treatment, 20 "Extazy" watermelon units (1.5-2 kg/unit) and 20 "Reina de corazones" watermelon units (4-5 kg/unit) were collected and analyzed individually. None of the samples contained forchlorfenuron residues higher than 1 microg/kg.     

X-ray metal assessment and ovarian ultrastructure alterations of the beetle,Blaps polycresta (Coleoptera,Tenebrionidae), inhabiting polluted soil

Environmental Science and Pollution Research - X-ray analysis was applied to estimate the percentages of heavy metals in ovarian tissues of the tenebrionid beetle, Blaps polycresta. Calcium,...     

Efficiency and degradation products elucidation of the photodegradation of mefenpyrdiethyl in water interface using TiO2 P-25 and Hombikat UV100

The photodegradation of mefenpyrdiethyl (MFD), an herbicide safener, was investigated in aqueous suspensions by using Degussa P-25 and Hombikat UV100 titanium oxide under simulated sunlight irradiation. The effects of initial concentration of the herbicide, pH, catalysts and hydrogen peroxide doses as well as their combinations were studied and optimized. Accordingly, the kinetic parameters were determined and the effectiveness of the processes was assessed by calculating the rate constants. A pseudo first-order kinetics was observed. Under experimental conditions, the degradation rate constants were strongly influenced using P-25 and no noticeable effect was observed for Hombikat UV100. DFT calculations with B3LYP/6-311+G(2d,p)//B3LYP/6-31+G(d,p) level of theory were performed to check whether significant conformational changes occur when the charge state of the MFD substrate changes and whether these changes could play a role in the dependency of photodegradation rate constant on the studied pH. High resolution mass spectrometry (FT-ICR/MS) was implemented to identify the main degradation products.     

On the influence of chemical initial and boundary conditions on annual regional air quality model simulations for North America

The influence of chemical initial conditions and chemical lateral boundary conditions (CLBCs) on long-term regional air quality model simulations was investigated using outputs from an annual simulation of the year 2002 on a North American domain. This simulation was carried out using the AURAMS regional air quality model. It was subdivided into three multi-month segments with two overlap periods (May 15–30 and September 1–30) to allow the segments to be run in parallel. For this approach to work, model predictions had to match very closely by the end of the two-week and four-week overlap periods. The time required for the values of daily domain-average surface PM_2.5 concentration to match for the two simulation segments associated with each of the two overlap periods was four and six days, respectively. For individual locations within the model domain, however, the required spin-up period was as much as nine days, considerably longer than the 2–4-day spin-up period usually assumed in the literature. For ozone, on the other hand, the daily domain-average surface ozone concentration values did not converge for either overlap period. A zero-gradient CLBC had been used for all run segments and species. When a time-invariant CLBC for ozone was used instead, the daily domain-average surface ozone concentration values behaved more realistically and did converge after fewer than three days. A similar improvement was also obtained for individual locations, but with spin-up periods of up to nine days. Model chemical spin-up time thus seems to be dependent on the species considered, the time required for the influence of the inflow boundaries to reach all locations within the domain, and the impact of local emissions sources. These results suggest the use of a spin-up period of longer than one week for a large (continental) domain and long-term simulation of PM_2.5 and O₃ rather than the 2–4 days commonly assumed in the literature.     

Molecular analysis of carbon dioxide adsorption processes on steel slag oxides

This review presents a summary of the main interactions that occur during the carbon dioxide (CO₂) adsorption at the surface of steel slags with basic (CaO, MgO), amphoteric (Al₂O₃, Cr₂O₃, TiO₂, MnO, iron oxides) and acidic (SiO₂) oxides. The high content of metal oxides in steel slags gives them a great potential to adsorb CO₂, reaching a saturation value of about 0.25 kg of CO₂/kg of slag. CO₂ is physisorbed and chemisorbed on the most of metal oxide types. Generally, the CO₂ physisorption on the basic and amphoteric metal oxides involves an electrostatic interaction between the CO₂ and the cation from the oxides while the CO₂ chemisorption rather implicates the basic sites that acts as the electron donor, and which are associated with O^2? ions localized at surface defects. These interactions result in the formation of carbonates (monodentates or unidentates and bidentates). The affinity of oxides for the CO₂ and the carbonate formation principally depend of the strength and number of basic sites at their surface and varies as following: basic oxides > amphoteric oxides > acidic oxides. The basic metal oxides generally represent the best electron donors and thus the best CO₂ adsorbents due to the high basicity and their great number of reaction sites. Hence, it appears that the surface structure of basic and amphoteric metal oxides which may favour their interaction with the CO₂, as well as their basicity is the determinant factor contributing to the formation of carbonate species. The molecular analysis of CO₂ adsorption on steel slag metal oxides will provide useful data to identify rate-controlling mechanisms and should be considered for the development of new effective methods for the capture of atmospheric CO₂ emissions released from industries.     

Pollution characterization of liquid waste of the factory complex Fertial (Arzew,Algeria)

The industrial development in Algeria has made a worrying situation for all socioeconomic stakeholders. Indeed, this economic growth is marked in recent years by the establishment of factories and industrial plants that discharge liquid waste in marine shorelines. These releases could destabilize the environmental balance in the coming years, hence the need to support the processing of all sources of pollution. Remediation of such discharges requires several steps of identifying the various pollutants to their treatments. Therefore, the authors conducted this first work of characterization of industrial effluents generated by the mineral fertilizer factory complex Fertial (Arzew), and discussed the pollution load generated by this type of industry. This monitoring would establish a tool for reflection and decision support developed by a management system capable of ensuring effective and sustainable management of effluents from industrial activities of Fertial.

Implications: The authors conducted this first work of characterization of industrial effluents generated by the mineral fertilizer factory complex Fertial (Arzew), and discussed the pollution load generated by this type of industry. This monitoring would establish a tool for reflection and decision support developed by a management system capable of ensuring effective and sustainable management of effluents from industrial activities of Fertial.     

Daily intake of selenium and concentrations in blood of residents of Riyadh City, Saudi Arabia

Concentrations of selenium (Se) in food from local markets of Riyadh, Kingdom of Saudi Arabia (KSA) were measured and daily intake calculated based on information from a questionnaire of foods eaten by healthy Saudis. The daily intake of Se was then compared to concentrations of Se in blood serum. Primary sources of Se in the diet of Saudis were as follows: meat and meat products (31%), egg (20.4%), cereals and cereal products (16%), legumes (8.7%), fruits (6.8%), milk and dairy products (2.0%), beverages (2%), sweets (1.8%), pickles (0.2%), and oil (0.02%). Daily intake of Se, estimated to be 93 μg Se/person/day, was slightly greater than that calculated from the Food and Agriculture Organization (FAO) food balance sheet for KSA, which was approximately 90 μg Se/person/day. The daily intake of Se by Saudis in Riyadh was greater than that of Australians or Dutch but less that of Canadians and Americans. There was a statistically significant correlation (R = +0.38, P < 0.05) between daily intake of Se and concentrations of Se in blood serum of Saudis in Riyadh. The mean concentration of Se in serum was 1.0 × 10(2) ± 30.5 μg Se/l. Taken together, the results suggest that the average Se intake and Se serum concentrations are within the known limits and recommendations, making it unlikely that Saudis are on average at risk of deficiency or toxicity.     

Assessing solvent derivatization and carbon dioxide supercritical fluid simultaneous extraction/derivatization of cyprodinil

Derivatization of cyprodinil with different reagents and solvents has been evaluated to improve the GC/MS characterization of this fungicide. After assessing some preliminary acylation and silylation reactions, derivatization with anhydrous heptafluorobutyric anhydride (HFBA) was selected as the best derivatization option for cyprodinil. The HFBA-cyprodinil derivative was clearly identified and characterized by GC/MS (ion-trap). The spectrum of the HFBA derivative of cyprodinil was characterized by the base peak, 252 m/z ion, and two other ions with relative abundances of 5% (224 m/z ion) and 4% (420 m/z molecular ion). Conversion rates in the range of 83–92% were obtained when 0.1–1 μg cyprodinil were derivatized in vial without solvent at 25ºC temperature for 120 min, with 5 μL HFBA and 5 μL pyridine. Simultaneous extraction-derivatization of cyprodinil in supercritical carbon dioxide was only achieved when no modifier was present, but conversion/recovery rates obtained in the replicate experiments carried out with 15 mL supercritical carbon dioxide at 50°C and 200 atm (n = 5), 300 atm (n = 7), and 400 atm (n = 5) were no reproducible (RSD > 50%) and ranged between 10% and 45% (related to the signal obtained for derivatization in vial).     

Analysis and residue levels of forchlorfenuron (CPPU) in watermelons

This paper describes the application of liquid chromatography-tandem mass spectrometry (LC/MS-MS) for analysis of residues of forchlorfenuron (CPPU), a new plant growth regulator, in watermelons, after a sample preparation step based on the buffered Quick, Easy, Cheap, Effective, Rugged and Safe extraction method. Analytical determinations were carried out in a triple quadrupole system fitted with an electrospray interphase operating in the positive ionisation mode (ESI+). Three simultaneous MS-MS transitions of the quasi-molecular ion m/z 248 (precursor ion) were monitored for data adquisition (248 > 129, 248 > 155, and 248 > 248), using the transition 248 > 129 for quantitation. Recovery studies on watermelons at levels of 1–200 μ g/kg, performing five replicates at each level and using bracketing single-level calibration with matrix-matched standards for quantitation, gave forchlorfenuron mean recoveries ranging from 82 to 106% with relative standard deviations (RSD) lower than 18%. The limit of determination was established at 1 μ g/kg. The method was applied to evaluate the persistence of forchlorfenuron residues in watermelons grown in plastic greenhouses, after applying an individual spray treatment to the flower ovary at the anthesis stage (45 μ g/flower and 60 μ g/flower for cv “Extazy” and cv “reina de corazones” watermelons, respectively). One month after treatment, 20 “Extazy” watermelon units (1.5–2 kg/unit) and 20 “Reina de corazones” watermelon units (4–5 kg/unit) were collected and analyzed individually. None of the samples contained forchlorfenuron residues higher than 1 μ g/kg.     

Trace elements exposure influences proximate body composition and antioxidant enzyme activities of the species tilapia and catfish in Burullus Lake—Egypt: human risk assessment for the consumers

The trace elements concentration in the fish estimates the contamination degree in the aquatic environment. These toxic trace elements are transported into the human through the consumption of polluted fish. This study estimated the effect of Cd, Hg, Pb, As, and Al on tilapia species and catfish Clarias gariepinus (six for each species of fish) inhabiting Burullus Lake—Egypt 30° 33′–31° 08′ E and 30° 22′–31° 35′ N. The highest Pb concentrations recorded in the muscle of C. gariepinus 2.29 ± 0.29 μg/g while S. galilaeus was estimated the lowest Hg concentration of 0.54 ± 0.02 μg/g which indicated the presence of contaminants exceeded the limits permitted by FAO/WHO and EC. The maximum mean carbohydrate, lipid, and protein recorded in O. niloticus 18.66, 16.33, and 58.16 mg/g, respectively; moisture in O. aureus 67.33%; and ash 16.41% in O. niloticus. The lowest amount of carbohydrate was recorded in the T. zillii 14.1 mg/g, lipid, and ash in C. gariepinus 11.65 mg/g and 3.375%, respectively. Protein and moisture in the S. galilaeus were 53.75 mg/g and 60.75%, respectively. The results recorded a marked insignificant (P > 0.05) decrease in CAT, GR, and GPx activity in O. niloticus. GSH and SOD activity was an insignificant (P > 0.05) decrease in C. gariepinus. The results concluded that the trace elements concentrations exceed the maximum permissible limits recommended in fish samples set by Egypt, FAO, WHO, and EC. The estimated weekly intake of all elements through consumption of studied fish species inhabiting Burullus Lake by a child (15 kg) in Egypt is well above the PTWI recommended by FAO/WHO, whereas it is well below the PTWI for human consumption by young people (40 kg) and adult person (70 kg), at least in respect of residual levels of studied elements excluding Cd and Hg. Thus, for consumer protection, these fish species are unsafe and have hazardous effects for children, and about youth and adult consumption, caution must be taken to consider individuals eating significant amounts of fish.