Particle size distribution of airborne Aspergillus fumigatus spores emitted from compost using membrane filtration

Information on the particle size distribution of bioaerosols emitted from open air composting operations is valuable in evaluating potential health impacts and is a requirement for improved dispersion simulation modelling. The membrane filter method was used to study the particle size distribution of Aspergillus fumigatus spores in air 50 m downwind of a green waste compost screening operation at a commercial facility. The highest concentrations (approximately 8 × 10⁴ CFU m⁻³) of culturable spores were found on filters with pore diameters in the range 1–2 μm which suggests that the majority of spores are emitted as single cells. The findings were compared to published data collected using an Andersen sampler. Results were significantly correlated (p < 0.01) indicating that the two methods are directly comparable across all particles sizes for Aspergillus spores.     

Test methods to aid in the evaluation of the diversion of biodegradable municipal waste (BMW) from landfill

A wide range of waste characterization methods are available, each developed for a specific purpose such as determining compost stability, or for landfill acceptance criteria. Here test methods have been evaluated for the purpose of assessing waste treatment process performance and monitoring the diversion of biodegradable municipal waste (BMW) from landfill. The suitability factors include the timescale of the method, applicability to a wide range of materials and ability to indicate the long-term biodegradability of organic waste samples. The anaerobic test methods, whilst producing reliable results, take at least several weeks to complete, therefore, not allowing for regular routine analysis often required for diversion assessments. Short-term tests are required which can correlate with, and, therefore, estimate, values obtained from long-term anaerobic methods. Aerobic test methods were found to offer a significantly improved timescale compared with anaerobic test methods; however, they have limitations due to not measuring the full extent of sample biodegradability. No single test method was found to be completely sufficient for routine biodegradability analysis suitable for monitoring the BMW diversion from landfill. Potential areas for further research include spectrographic FT-IR or enzyme-based approaches such as the ECD or EHT methods.     

Investigation of the application of an enzyme-based biodegradability test method to a municipal solid waste biodrying process

This paper presents a study to evaluate the recently developed enzymatic hydrolysis test (EHT) through its repeated application to a waste treatment process. A single waste treatment facility, involving a biodrying process, has been monitored using three different methods to assess the biodegradable content of the organic waste fractions. These test methods were the anaerobic BMc, aerobic DR4 and the EHT, which is a method based on the enzymatic hydrolysis of the cellulosic content of waste materials. The input municipal solid waste (MSW) and the output solid recovered fuel (SRF) and organic fines streams were sampled over a period of nine months from a single mechanical biological treatment (MBT) facility. The EHT was applied to each stream following grinding to <10 mm and <2 mm, in order to investigate the effect of particle size on the release of dissolved organic carbon (DOC) from enzyme hydrolysis. The output organic fines were found to more biodegradable than the MSW input and SRF output samples in each of the test methods, significantly (p < 0.05) for the EHT and DR4 methods, on the basis of DOC released and oxygen consumed, respectively. The variation between sample replicates for the EHT was higher where sample sizes of <2 mm were analysed compared to sizes of <10 mm, and the DOC release at each phase of the EHT was observed to be higher when using particle sizes of <2 mm. Despite this, additional sample grinding from the <10 mm to a smaller particle size of <2 mm is not sufficiently beneficial to the analysis of organic waste fractions in the EHT method. Finally, it was concluded that as similar trends were observed for each test method, this trial confirms that EHT has the potential to be deployed as a practical operational biodegradability monitoring tool.     

Test methods to aid in the evaluation of the diversion of biodegradable municipal waste (BMW) from landfill

This response follows on from a recent discussion by Sánchez (2009) on test methods to aid in the evaluation of the diversion of biodegradable municipal waste (BMW) from landfill. Test methods to assess the biodegradability/biodegradable content of organic waste are of great interest across Europe for different purposes, such as landfill acceptance criteria, monitoring treatment facility performance and for monitoring the diversion of biodegradable municipal waste (BMW) from landfill. Many studies have recently attempted to correlate short-term test methods with long-term anaerobic test methods. This response discusses recent findings and conclusions made by Sánchez (2009) and describes recent work undertaken at Cranfield University to develop the enzymatic hydrolysis test (EHT) method. The EHT has previously shown potential as a short-term, non-biological, biodegradability assessment tool, however there is a requirement to further develop this test method. We conclude that aerobic and anaerobic biological test methods are not the only suitable methods of assessing waste treatment process performance; and that alternative methods such as EHT are feasible and potentially suitable.     

Morphological classification of bioaerosols from composting using scanning electron microscopy

This research classifies the physical morphology (form and structure) of bioaerosols emitted from open windrow composting. Aggregation state, shape and size of the particles captured are reported alongside the implications for bioaerosol dispersal after release. Bioaerosol sampling took place at a composting facility using personal air filter samplers. Samples were analysed using scanning electron microscopy. Particles were released mainly as small (<1 μm) single, spherical cells, followed by larger (>1 μm) single cells, with aggregates occurring in smaller proportions. Most aggregates consisted of clusters of 2–3 particles as opposed to chains, and were <10 μm in size. No cells were attached to soil debris or wood particles. These small single cells or small aggregates are more likely to disperse further downwind from source, and cell viability may be reduced due to increased exposure to environmental factors.     

Reflexive assessment of practical and holistic sanitation development tools using the rural and peri-urban case of Mexico

Lack of sanitation affects the lives of billions of people worldwide. It is now generally agreed that sustainable solutions to this complex problem require social and cultural factors to be addressed in addition to the habitual economic and technical aspects. Increasingly, sector professionals view the fragmented approaches to sanitation as a limiting factor. This refers to the fragmentation of the knowledge on the subject among often hermetic disciplines and to the distribution of political mandates on sanitation across many institutions, which independently tackle specific aspects of the issue. Holistic approaches have often been suggested as a solution. This paper presents the development of such a holistic approach, designed to assess sanitation development in rural and peri-urban settings. Tested in three Mexican communities, it relies on qualitative research tools to identify critical influences to sanitation development. This article presents generic results about micro and macro-factors affecting sanitation development in Mexican villages, and reflexively examines the research process as well as the strengths and limitations of the approach. The conceptual map developed for each case study successfully highlights the interconnectedness of all factors affecting sanitation development. Despite some weaknesses, these maps constitute a practical assessment tool for interdisciplinary teams deployed in integrated water and sanitation development programs and a valuable didactic tool for training activities.     

Effects of cattle manure on erosion rates and runoff water pollution by faecal coliforms

The large quantities of slurry and manure that are produced annually in many areas in which cattle are raised could be an important source of organic matter and nutrients for agriculture. However, the benefits of waste recycling may be partially offset by the risk of water pollution associated with runoff from the fields to which slurry or manure has been applied. In this paper, the effects of cattle manure application on soil erosion rates and runoff and on surface water pollution by faecal coliforms are analysed. Rainfall simulations at a rate of 70 mm h(-1) were conducted in a sandy loam soil packed into soil flumes (2.5m long x 1m wide) at a bulk density of 1400 kg m(-3), with and without cattle slurry manure applied on the surface. For each simulation, sediment and runoff rates were analysed and in those simulations with applied slurry, presumptive faecal coliform (PFC) concentrations in the runoff were evaluated. The application of slurry on the soil surface appeared to have a protective effect on the soils, reducing soil detachment by up to 70% but increasing runoff volume by up to 30%. This practice implies an important source of pollution for surface waters especially if rainfall takes place within a short period after application. The concentrations of micro-organisms (presumptive faecal coliforms (PFCs)) found in water runoff ranged from 1.9 x 10(4) to 1.1 x 10(6) PFC 100mL(-1), depending on the initial concentration in the slurry, and they were particularly high during the first phases of the rainfall event. The result indicates a strong relationship between the faecal coliforms transported by runoff and the organic matter in the sediment.