Influence of environmental parameters on the accuracy of nitrogen dioxide passive diffusion tubes for ambient measurement

Two studies at three sites in the UK provided confirmation that systematic positive bias in NO2 diffusion tube measurement occurred because of changes to "within-tube" chemistry, rather than eddy diffusion at the mouth of the tube. In the first study in Cambridge, UK, sampler overestimation for 1 and 2 week exposures was compared to corresponding time-averaged monitor measurements (NO-NO2-NOx, O3) and weather variables. Noninearity between sampler and monitor NO2 measurements was interpreted in terms of spatial and temporal variations in relative and absolute availability of NO, NO2 and O3 at the site. A maximum overestimation occurred for an exposure mean NO2/NOx approximately 0.5. The separate contributions of reduced NO2 photolysis and eddy diffusion were compared in Study II using samplers of two materials, acrylic and quartz, and of different lengths (40, 55, 71 and 120 mm) at three sites: Norwich background, Cambridge intermediate, London kerbside. For compared sites, NO2 measured by acrylic samplers was significantly higher than for equivalent quartz samplers. For quartz samplers [NO2]mean was only just above the monitor at Norwich and London; sampler/monitor NO2 = 1.04 (P = 0.59) and 1.01(P = 0.76), respectively. For acrylic samplers the order of [NO2]mean was 40 mm > 120 mm > 71 mm > or = 55 mm. Excepting 40 mm samplers, this accords with a chemical bias where co-diffusing NO and 03 molecules in longer tubes have more time to react to form excess NO2. Bias in 40 mm samplers is discussed. Eddy diffusion is negligible for standard samplers because [NO2]mean was equivalent for 55 mm and 71 mm acrylic samplers and close to monitor NO2 for 71 mm quartz tubes. Both studies showed that sampler accuracy was dependent on location. Significantly, overestimation was greatest (approximately 3-4 ppb) where the NO2 annual mean was approximately 20 ppb, close to the UK and EU air quality standard of 21 ppb.     

A participatory approach to the establishment of a baseline scenario for a reforestation Clean Development Mechanism project

This paper is part of a two-year study to investigate the feasibility of initiating a Clean Development Mechanism (CDM) project in an indigenous community of Eastern Panamá, Ipetí-Emberá. We use participatory mapping and matrices as well as household surveys to develop a land-use/land-cover baseline scenario and examine the role of local participation in assessing land-use change. In Ipetí, land-use change has not occurred in a linear way over the last decades, and our data unveils socio-economic factors as potential key drivers of change. The concordance that we observed between geographic information and individual and collective perceptions of land-use change substantiates the possibility of using local knowledge in the establishment of baseline data for CDM projects. Our calculations suggest that the total carbon (C) stocks in the Tierra Colectiva (TC) of Ipetí-Emberá in 2004 represents a 47% reduction from the estimated C stock at the onset of settlement in the early 1970’s. Results from the participatory assessments predict that, in 2024 and in absence of a CDM project, the C stocks will decline from 301,859 t C in 2004 to 155,730 t C, which constitutes a reduction of 52%. The scenario with CDM estimates C stocks of 305,853 t C for 2024, a value slightly superior to the 2004 value. In the TC there is ground to believe that cattle ranching is likely to become an ever more important activity as the population is young and growing and cannot easily move elsewhere. Forests tend to be cleared for cultivation while pastures are established on short fallows. Our baseline scenario underlines the potential for a CDM project to make a significant difference in the future C stocks of this landscape.     

Grey Nurse Shark (Carcharias taurus) Diving Tourism: Tourist Compliance and Shark Behaviour at Fish Rock, Australia

Humans can dive with critically endangered grey nurse sharks (Carcharias taurus) along the east coast of Australia. This study investigated both compliance of tourist divers to a code of conduct and legislation and the behaviour of grey nurse sharks in the presence of divers. A total of 25 data collection dives were conducted from December 2008 to January 2009. Grey nurse shark and diver behaviour were documented using 2-min scan samples and continuous observation. The proportion of time spent observing human–shark interactions was 9.4% of total field time and mean human–shark interaction time was 15.0 min. Results were used to gauge the effectiveness of current management practices for the grey nurse shark dive industry at Fish Rock in New South Wales, Australia. Grey nurse shark dive tourists were compliant to stipulations in the code of conduct and legislation (compliance ranged from 88 to 100%). The research detailed factors that may promote compliance in wildlife tourism operations such as the clarity of the stipulations, locality of the target species and diver perceptions of sharks. Results indicated that grey nurse sharks spent the majority of their time milling (85%) followed by active swimming (15%). Milling behaviour significantly decreased in the presence of more than six divers. Distance between sharks and divers, interaction time and number of sharks were not significantly correlated with grey nurse shark school behaviour. Jaw gaping, rapid withdrawal and stiff or jerky movement were the specific behaviours of grey nurse sharks that occurred most frequently and were associated with distance between divers and sharks and the presence of six or more divers. Revision of the number of divers allowed per interaction with a school of grey nurse sharks and further research on the potential impacts that shark-diving tourism may pose to grey nurse sharks is recommended.     

A Quantitative Safety Assessment Model For Transgenic Protein Products Produced In Agricultural Crops

Transgenic plants are now being used to develop pharmaceutical and industrial products in addition to their use in crop improvement. Using confinement requirements, these transgenic plants are grown and processed under conditions that prevent intermixing with commodity crops. Regulatory agencies in the United States have provided guidance of zero tolerance of these new industrial crops with commodity crops. While this is a worthy goal, it is theoretically unattainable. In spite of the best containment practices, there is a potential risk using any system of production due to unforeseen incidences including natural disasters or exposure to workers. The precautionary principle has been used for numerous regulated articles in addressing the potential risks of new products and technology based on a risk assessment in similar situations. We present here a risk assessment model that could be used as a start to develop an accepted model for the industry. The model is based on current risk models used for other regulated articles, but adapted for these types of products. This could be used to determine action levels in the event of an unintended exposure or to ensure that detection or confinement methods are adequate to avoid risks. As an example, aprotinin, a therapeutic protein now being produced in maize, was evaluated for potential risk to humans using this model.     

Job involvement as a moderator variable in the life events stress–illness relationship

It is hypothesized that the relationship between life events and reported symptoms of psychological and physical illness is moderated by the extent to which a person is job-involved. Analysis of the data in a sample of employed men shows large correlations between a measure of life events and reported symptoms for men with low job involvement, substantially higher than where the men are highly job-involved.     

Flexible and robust strategies for waste management in Sweden

Treatment of solid waste continues to be on the political agenda. Waste disposal issues are often viewed from an environmental perspective, but economic and social aspects also need to be considered when deciding on waste strategies and policy instruments. The aim of this paper is to suggest flexible and robust strategies for waste management in Sweden, and to discuss different policy instruments. Emphasis is on environmental aspects, but social and economic aspects are also considered. The results show that most waste treatment methods have a role to play in a robust and flexible integrated waste management system, and that the waste hierarchy is valid as a rule of thumb from an environmental perspective. A review of social aspects shows that there is a general willingness among people to source separate wastes. A package of policy instruments can include landfill tax, an incineration tax which is differentiated with respect to the content of fossil fuels and a weight based incineration tax, as well as support to the use of biogas and recycled materials.     

Linking Models of Land Use,Resources, and Economy to Simulate the Development of Mountain Regions (ALPSCAPE)

We present a framework of a scenario-based model that simulates the development of the municipality of Davos (Swiss Alps). We illustrate our method with the calculation of the scenario for 2050 “Decrease in subsidies for mountain agriculture and liberalization of markets.” The main objective was to link submodels of land-use allocation (regression-based approach), material and energy flows submodels (Material and Energy Flux Analysis), and economic submodels (Input–Output Analysis). Letting qualitative and quantitative information flow from one submodel to the next, following the storyline describing a scenario, has proven to be suitable for linking submodels. The succession of the submodels is then strongly dependent on the scenario. Qualitative information flows are simulated with microsimulations of actor choices. Links between the submodels show different degrees of robustness: although the links involving microsimulations are the weakest, the uncertainty introduced by the land-use allocation model is actually advantageous because it allows one possible change in the landscape in the future to be simulated. The modeling results for the scenario here presented show that the disappearance of agriculture only marginally affects the region’s factor income, but that the consequences for the self-sufficiency rate, for various landscape-related indicators and ecosystem services, and for the economy in the long term may be considerable. These benefits compensate for agriculture’s modest direct economic value. The framework presented can potentially be applied to any region and scenario. This framework provides a basis for a learning package that allows potential detrimental consequences of regional development to be anticipated at an early stage.     

An Inexpensive Dual-Chamber Particle Monitor: Laboratory Characterization

Abstract

In developing countries, high levels of particle pollution from the use of coal and biomass fuels for household cooking and heating are a major cause of ill health and premature mortality. The cost and complexity of existing monitoring equipment, combined with the need to sample many locations, make routine quantification of household particle pollution levels difficult. Recent advances in technology, however, have enabled the development of a small, portable, data-logging particle monitor modified from commercial smoke alarm technology that can meet the needs of surveys in the developing world at reasonable cost. Laboratory comparisons of a prototype particle monitor developed at the University of California at Berkeley (UCB) with gravi-metric filters, a tapered element oscillating microbalance, and a TSI DustTrak to quantify the UCB particle monitor response as a function of both concentration and particle size and to examine sensor response in relation to changes in temperature, relative humidity, and elevation are presented here. UCB particle monitors showed good linearity in response to different concentrations of laboratory-generated oleic acid aerosols with a coarse (mass median diameter, 2.1 µm) and fine (mass median diameter, 0.27–0.42 µm) size distributions (average r² = 0.997 ± 0.005). The photoelectric and ionization chamber showed a wide range of responses based on particle size and, thus, require calibration with the aerosol of interest. The ionization chamber was five times more sensitive to fine rather than coarse particles, whereas the photoelectric chamber was five times more sensitive to coarse than fine. The ratio of the response between the two sensors has the potential for mass calibration of individual data points based on estimated parameters of the size distribution. The results demonstrate the significant potential of this monitor, which will facilitate the evaluation of interventions (improved fuels, stoves, and ventilation) on indoor air pollution levels and research on the impacts of indoor particle levels on health in developing countries.