Mobility of heavy metals from polluted sediments of a semi-enclosed basin: in situ benthic chamber experiments in Taranto’s Mar Piccolo (Ionian Sea,Southern Italy)

In situ benthic flux experiments were conducted at two stations in the Mar Piccolo of Taranto (Italy), one of the most industrialised and contaminated coastal areas of the Mediterranean. Sediments of the two stations are notably different in their trace metal content, with a station closer to a Navy harbour showing higher mean concentrations of almost all investigated metals (Al, As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, V and Zn). Conversely, both stations are characterised by significant Hg contamination, compared to the local baseline. Results of a sequential extraction scheme on surface sediments suggest a relatively scarce mobility of the examined metals (Zn > Ni > Cr > As > Cu > Pb). A Hg-specific extraction procedure showed that most of the element (93.1 %) occurs in a fraction comprising Hg bound to Fe/Mn oxi-hydroxides. Reduction of these oxides may affect Hg remobilisation and redistribution. Porewater profiles of dissolved trace metals were quite similar in the two sites, although significant differences could be observed for Al, Cu, Fe and Hg. The highest diffusive fluxes were observed for As, Fe and Mn. Mobility rates of several trace elements (Al, As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, V and Zn) were directly measured at the sediment–water interface. Results from benthic in situ incubation experiments showed increasing dissolved metal concentrations with time, resulting in higher fluxes for Cu, Fe, Hg, V and Zn in the most contaminated site. Conversely, fluxes of Mn, Ni and Pb were comparable between the two stations. The estimated flux of Hg (97 μg m^?2 day^?1) was the highest observed among similar experiments conducted in other highly contaminated Mediterranean coastal environments. Benthic fluxes could be partially explained by considering rates of organic matter remineralisation, dissolution of Fe/Mn oxy-hydroxides and metal speciation in sediments. Seasonal and spatial variation of biogeochemical parameters can influence metal remobilisation in the Mar Piccolo area. In particular, metals could be promptly remobilised as a consequence of oxygen depletion, posing a serious concern for the widespread fishing and mussel farming activities in the area.     

Identification of Quarries Rehabilitation Scenarios: A Case Study Within the Metropolitan Area of Bari (Italy)

This paper addresses quarries rehabilitation issue within a Metropolitan Area. Areas where mining activity is carried out have been subjected to physical and environmental degradation linked both to pursue the building materials extraction and to the city expansion continuously asking for new areas to be developed with residential and service functions. These changes also occurred where environmental and landscape values are present. It has been therefore pointed out the issue of such areas redevelopment that, to be functionally reintegrated, must be consistently linked to the activities and the territorial local contexts characteristics. In this paper the quarries reuse issue is carried out through parameters identification able to define the quarries relationship with the neighboring towns and with their surroundings besides to identify their physical, environmental and landscaping characteristics. Quarry reuse alternatives have been identified among those consistent with the rehabilitation goals, as defined by the planning sector and internationally approved, while their selection is derived from the application of a two-step methodology: a multi-criteria analysis related to punctual parameters at a "site-specific" level, followed by a further territorial indicators checking over the wide area. This application has led to socially accepted results identifying the examined quarries for reuses ranging from agricultural-forestry and urban to functional or naturalistic. The proposed method has also proved to be suitable to address the abandoned quarries reuse problem with a systemic and consultative approach, as it is able to correlate the many variables present in the social and spatial complexity of the Metropolitan Areas.     

Cleaning painted surfaces: evaluation of leaching phenomenon induced by solvents applied for the removal of gel residues

Cleaning is one of the most important, delicate, and at the same time controversial processes in the conservation treatment of paintings. Although a strict definition of cleaning would be the removal of dirt, grime, or other accretions (surface cleaning), in the conservation field, cleaning is used in the broader meaning to include thinning/removing altered or “unwanted layers” of materials without damaging or altering the physicochemical properties of the surfaces to be preserved. The cleaning of unvarnished paintings is one of the most critical issues that are currently discussed. Several studies exist regarding different cleaning tools, such as gels, soaps, enzymes, ionic liquids, and foams, as well as various dry methods and lasers, but only a few have been performed on the risk associated with the use of water and organic solvents for the cleaning treatments in relation to the original paint binder. The aim of the study is to verify analytically the behavior of water gelling agents during cleaning treatments and the interaction of the following elements: water or organic solvents applied for the removal of gel residues with the original lipid paint binder. For this purpose, the study was conducted on a fragment of canvas painting (sixteenth to seventeenth century) of Soprintendenza per i Beni Storici, Artistici ed Etnoantropologici del Friuli Venezia Giulia (Superintendence for the Historical, Artistic and Ethno-anthropological Heritage of Friuli Venezia Giulia), Udine by means of Fourier transform infrared spectroscopy, gas chromatography/mass spectrometry, and scanning electron microscopy.     

The quantitative real-time PCR applications in the monitoring of marine harmful algal bloom (HAB) species

In the last decade, various molecular methods (e.g., fluorescent hybridization assay, sandwich hybridization assay, automatized biosensor detection, real-time PCR assay) have been developed and implemented for accurate and specific identification and estimation of marine toxic microalgal species. This review focuses on the recent quantitative real-time PCR (qrt-PCR) technology developed for the control and monitoring of the most important taxonomic phytoplankton groups producing biotoxins with relevant negative impact on human health, the marine environment, and related economic activities. The high specificity and sensitivity of the qrt-PCR methods determined by the adequate choice of the genomic target gene, nucleic acid purification protocol, quantification through the standard curve, and type of chemical detection method make them highly efficient and therefore applicable to harmful algal bloom phenomena. Recent development of qrt-PCR-based assays using the target gene of toxins, such as saxitoxin compounds, has allowed more precise quantification of toxigenic species (i.e., Alexandrium catenella) abundance. These studies focus only on toxin-producing species in the marine environment. Therefore, qrt-PCR technology seems to offer the advantages of understanding the ecology of harmful algal bloom species and facilitating the management of their outbreaks.     

A simple linear model for estimating ozone AOT40 at forest sites from raw passive sampling data

A rapid, empirical method is described for estimating weekly AOT40 from ozone concentrations measured with passive samplers at forest sites. The method is based on linear regression and was developed after three years of measurements in Trentino (northern Italy). It was tested against an independent set of data from passive sampler sites across Italy. It provides good weekly estimates compared with those measured by conventional monitors (0.85 ≤R(2)≤ 0.970; 97 ≤ RMSE ≤ 302). Estimates obtained using passive sampling at forest sites are comparable to those obtained by another estimation method based on modelling hourly concentrations (R(2) = 0.94; 131 ≤ RMSE ≤ 351). Regression coefficients of passive sampling are similar to those obtained with conventional monitors at forest sites. Testing against an independent dataset generated by passive sampling provided similar results (0.86 ≤R(2)≤ 0.99; 65 ≤ RMSE ≤ 478). Errors tend to accumulate when weekly AOT40 estimates are summed to obtain the total AOT40 over the May-July period, and the median deviation between the two estimation methods based on passive sampling is 11%. The method proposed does not require any assumptions, complex calculation or modelling technique, and can be useful when other estimation methods are not feasible, either in principle or in practice. However, the method is not useful when estimates of hourly concentrations are of interest.     

Detection of Viruses in Coastal Seawater Using <Emphasis Type="Italic">Mytilus Galloprovincialis</Emphasis> as an Accumulation Matrix

The purpose of this study was to demonstrate that shellfish can be used to detect enteric viruses in marine waters where they are present at very low concentrations. Aqua-cultured mussels were placed in the sea just off the mouth of a drainage channel affected by human and animal faecal contamination. Samples were taken from the channel, the sea and the mussels at intervals over two 4-week periods. The samples were tested to verify the presence of both rotaviruses and E. coli. Rotaviruses were detected by Real Time-PCR, typed by multiplex PCR and subsequently sequenced. E. coli was enumerated in water matrices by a filtering method and in mussels by the MPN method. The presence of E. coli in the examined matrices demonstrates contamination of faecal origin throughout the studied environments. Rotaviruses were recorded in channel waters, but not in sea water. In both experiments, rotaviruses were detected in mussels 21 and 28 days after being placed in the sea water off the channel mouth. The use of mussels thus enabled the detection of rotaviruses in waters where the high dilution rendered direct investigation impossible. This study indicates that mussels can be used in marine virological surveillance programs.     

Development of SuperSmart Grids for a more efficient utilisation of electricity from renewable sources

If Europe is serious about reaching its target to keep global mean temperature increase below 2 °C, it must strive for a 100% renewable electricity system by 2050. The SuperSmart Grid approach combines what is often perceived as two exclusive alternatives: wide area power generation and decentralised power generation. We argue that by combining these, in fact, complementary measures, it is possible to address the crucial issue of renewable generation—fluctuating supply—in a comprehensive as well as in a technologically and economically viable manner. Thus, the SuperSmart Grid simultaneously can contribute to energy security, climate security, social security, and national security.