San copolymer membranes with ion exchangers for Cu(II) removal from synthetic wastewater by electrodialysis

Heterogeneous membranes were obtained by using styrene-acrylonitrile copolymer (SAN) blends with low content of ion-exchanger particles (5 wt.%). The membranes obtained by phase inversion were used for the removal of copper ions from synthetic wastewater solutions by electrodialytic separation. The electrodialysis was conducted in a three cell unit, without electrolyte recirculation. The process, under potentiostatic or galvanostatic control, was followed by pH and conductivity measurements in the solution. The electrodialytic performance, evaluated in terms of extraction removal degree (rd) of copper ions, was better under potentiostatic control then by the galvanostatic one and the highest (over 70%) was attained at 8 V. The membrane efficiency at small ion-exchanger load was explained by the migration of resin particles toward the pores surface during the phase inversion. The prepared membranes were characterized by various techniques i.e. optical microscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis and differential thermal analysis and contact angle measurements.     

Study on the influence of various factors in the hydrometallurgical processing of waste printed circuit boards for copper and gold recovery

The present lab-scale experimental study presents the process of leaching waste printed circuit boards (WPCBs) in order to recover gold by thioureation. Preliminary tests have shown that copper adversely affects gold extraction; therefore an oxidative leaching pre-treatment was performed in order to remove base metals. The effects of sulfuric acid concentration, hydrogen peroxide volume and temperature on the metal extraction yield were studied by analysis of variance (ANOVA). The highest copper extraction yields were 76.12% for sample A and 18.29% for sample D, after leaching with 2 M H₂SO₄, 20 ml of 30% H₂O₂ at 30 °C for 3 h. In order to improve Cu removal, a second leaching was performed only on sample A, resulting in a Cu extraction yield of 90%. Other experiments have shown the negative effect of the stirring rate on copper dissolution. The conditions used for the process of gold extraction by thiourea were: 20 g/L thiourea, 6 g/L ferric ion, 10 g/L sulfuric acid, 600 rpm stirring rate. To study the influence of temperature and particle size, this process was tested on pins manually removed from computer central processing units (CPUs) and on waste CPU for 3½ h. A gold extraction yield of 69% was obtained after 75% of Cu was removed by a double oxidative leaching treatment of WPCBs with particle sizes smaller than 2 mm.     

Chemical, biological, and ecotoxicological assessment of pesticides and persistent organic pollutants in the Bahlui River, Romania

Background, aim, and scope  

Current knowledge on environmental impacts of industrial activities in Romania, particularly persistent organic pollutants (POPs), indicates that environmental standards of the European Union are not systematically met. In our study area, additional sources of POPs are agriculture and domestic wastes. Very scarce information is available upon environmental contaminations and effects. In the present study, we investigated the chemical pollution and their eventual impact on the ecosystem by measuring POPs and by using biological indicators of pollution.     

Changes in concentrations of fluoroquinolones and of ciprofloxacin-resistant Enterobacteriaceae in chicken feces and manure stored in a heap

This study evaluated the impact of storing chicken manure on the degradation of enrofloxacin (ENR) and ciprofloxacin (CIP), and on the survival of CIP-resistant Enterobacteriaceae. At 24 d of age, half of 8900 chickens received ENR for 5 d. After the animals departed, their manure was stored in two heaps for 63 d. Enterobacteriaceae were cultured on media containing 0 to 32 mg L?1 of CIP. A total of 320 isolates were fingerprinted using enterobacterial repetitive intergenic consensus-polymerase chain reaction (ERIC-PCR) to evaluate community structure. Initial concentrations of ENR and CIP in the heap were 22 and 1.8 mg kg?1, respectively. Seventy-three percent of the two fluoroquinolones were eliminated during storage. The administration of ENR led to a 5.1 log??? decrease in Enterobacteriaceae concentrations and emergence of CIP-resistant bacteria, which became dominant in the feces. concentrations decreased 1.2 to 2.3 log??? 2 d after the heaps were made and continued to decline during storage. No resistant were found by Day 63. The highest CIP minimum inhibitory concentration (MIC) values observed among isolates of and of both and sp. were 128 and 4 mg L?1, respectively. The dominant ERIC-PCR profiles changed over time. There was no relationship between genotype and resistance-isolated strains to CIP. Storing chicken manure in heaps appeared to be an effective way of limiting the entrance of CIP-resistant E. coli into the environment but did not prevent the dissemination of fluoroquinolones after land spreading.     

Ethoxylated Soybean Polyols for Polyurethanes

Soybean polyols prepared by ring opening reactions of epoxidized soybean oil with hydrogen active compounds (water, alcohols, organic or inorganic acids, thiols, hydrogen etc.) have a low reactivity in the reaction with isocyanates because the hydroxyl groups are secondary. This paper presents a simple and convenient method to increase the reactivity of soybean polyols with secondary hydroxyl groups by ethoxylation reactions with the preservation of triglyceride ester bonds. The method uses mild reaction conditions: low alkoxylation temperature of 35–45 °C, low pressure of 0.1–0.2 MPa (15–30 p.s.i.) and a superacid as catalyst (HBF₄). The new soybean polyols have a higher reactivity toward isocyanates in polyurethane formation due to the high percentage of primary hydroxyl groups. The primary hydroxyl content was determined by the second order kinetics of polyol reaction with phenyl isocyanate.     

The individual and cumulative effect of brominated flame retardant and polyvinylchloride (PVC) on thermal degradation of acrylonitrile-butadiene-styrene (ABS) copolymer

Acrylonitrile-butadiene-styrene (ABS) copolymers without and with a polybrominated epoxy type flame retardant were thermally degraded at 450 degrees C alone (10 g) and mixed with polyvinylchloride (PVC) (8 g/2 g). Gaseous and liquid products of degradation were analysed by various gas chromatographic methods (GC with TCD, FID, AED, MSD) in order to determine the individual and cumulative effect of bromine and chlorine on the quality and quantity of degradation compounds. It was found that nitrogen, chlorine, bromine and oxygen are present as organic compounds in liquid products, their quantity depends on the pyrolysed polymer or polymer mixture. Bromophenol and dibromophenols were the main brominated compounds that come from the flame retardant. 1-Chloroethylbenzene was the main chlorine compound observed in liquid products. It was also determined that interactions appear at high temperatures during decomposition between the flame retardant, PVC and the ABS copolymer.     

Novel Renewable Polyols Based on Limonene for Rigid Polyurethane Foams

Novel renewable polyols based on limonene were synthesized using thiol-ene “click” chemistry. These limonene based polyols were structurally characterized using wet methods (hydroxyl number, acid value and viscosity), gel permeation chromatography and spectroscopic methods. The results indicated that high yield of polyols from limonene based materials can be obtained using thiol-ene reaction. These limonene based polyols were used successfully for preparation of rigid polyurethane foams. These foams had regular shape cells and uniform cell size distribution. Thermal studies on these foams indicated that foams were thermally stable up to 250 °C. The glass transition temperature of the foams was higher than 200 °C. These rigid polyurethane foams had high compressive strength and the highest compressive strength of 195 kPa was observed. These foams have good physical–mechanical characteristics and could be suitable for all the applications of rigid polyurethane foams such as thermal insulation of freezers, storage tanks for the chemical and food industries, and packing materials for food industries.     

Using historical spy satellite photographs and recent remote sensing data to identify high-conservation-value forests

High-conservation-value forests (HCVFs) are critically important for biodiversity and ecosystem service provisioning, but they face many threats. Where systematic HCVF inventories are missing, such as in parts of Eastern Europe, these forests remain largely unacknowledged and therefore often unprotected. We devised a novel, transferable approach for detecting HCVFs based on integrating historical spy satellite images, contemporary remote sensing data (Landsat), and information on current potential anthropogenic pressures (e.g., road infrastructure, population density, demand for fire wood, terrain). We applied the method to the Romanian Carpathians, for which we mapped forest continuity (1955–2019), canopy structural complexity, and anthropogenic pressures. We identified 738,000 ha of HCVF. More than half of this area was identified as susceptible to current anthropogenic pressures and lacked formal protection. By providing a framework for broad-scale HCVF monitoring, our approach facilitates integration of HCVF into forest conservation and management. This is urgently needed to achieve the goals of the European Union's Biodiversity Strategy to maintain valuable forest ecosystems.     

The necessity to elaborate minerals policies exemplified by Romania

Mineral resources represent an integral component within a country’s economy. Despite the fact that the need for raw materials undergoes continuous growth–especially in countries which experience industrial upswing–proper measures to secure the access to domestic mineral resources in the long term have only been applied marginally in a large number of states. This lack of future-oriented legal frameworks–referred to as ‘Minerals Policies’–might lead to a diversity of sectoral problems (eg. dependency on certain raw materials imports). Based on data analysis and subsequent demand forecasting comprehensive national Minerals Policies can be derived in order to anticipate emerging issues and to achieve optimum sustainable management of domestic geological resources. The necessity of such concepts is illustrated by the example of Romania focusing on non-energetic mineral resources.