Impact of automobile emissions on the levels of platinum and lead in Accra,Ghana

Examination of car fleet records in Accra demonstrates an increasing proportion of catalytic converter-equipped cars in the relatively old car fleet (average age 13 years) due to their import from developed countries. However, only leaded petrol is sold in Ghana. Lead anti-knocking additives, which are known to affect catalyst activity and promote thermal sintering and mechanical abrasion, may increase Pt emissions. This possible synergism prompted the concomitant determination of Pb and Pt levels in road dust and roadside soils in Ghana. Both metals followed traffic density with higher concentrations in urban areas compared to remote sites. In urban areas, the range for Pb (365 +/- 93 microg g(-1) for dust and 291 +/- 76 microg g(-1) for soil) reflects precatalyst levels in Europe and the US, while the range for Pt (39 +/- 24 ng g(-1) for dust and 15 +/- 5.3 ng g(-1) for soil) is typical for the same countries. The elevated Pt concentrations were unexpected due to recent introduction of catalysts to Ghana compared to the prolonged use of catalysts in Europe and the US.     

中国环境镉接触人群低骨密度及肾功能不全的研究

25年前,Ambio曾载文提出应警惕环境镉污染引起的健康效应.1998年在中国进行了这方面的研究,评价了因食用大米而接触镉人群的前臂骨密度(BMD)和肾功能,发现尿镉(CdU)或血镉(CdB)高的绝经后妇女及血镉(CdB)高的男性,BMD均有所下降.在CdB或CdU与肾功能不全(视黄醇结合蛋白排泄增加)之间也发现了明显的、有统计学意义的剂量-效应关系及剂量-反应关系.第一次报道了日本以外的亚洲地区镉接触人群中存在骨不良效应.本文的意义在于阐明了亚洲的环境镉接触人群中仍存在着与肾和骨(镉的比较严重的有害效应)的联合效应,也讨论了一些欧洲镉接触人群的骨效应.     

Computer-assisted surgical planning and intraoperative guidance in fetal surgery: a systematic review

Fetal surgery has become a clinical reality, with interventions for twin-to-twin transfusion syndrome (TTTS) and spina bifida demonstrated to improve outcome. Fetal imaging is evolving, with the use of 3D ultrasound and fetal MRI becoming more common in clinical practise. Medical imaging analysis is also changing, with technology being developed to assist surgeons by creating 3D virtual models that improve understanding of complex anatomy, and prove powerful tools in surgical planning and intraoperative guidance. We introduce the concept of computer-assisted surgical planning, and present the results of a systematic review of image reconstruction for fetal surgical planning that identified six articles using such technology. Indications from other specialities suggest a benefit of surgical planning and guidance to improve outcomes. There is therefore an urgent need to develop fetal-specific technology in order to improve fetal surgical outcome. © 2015 The Authors. Prenatal Diagnosis published by John Wiley & Sons Ltd.     

The legal frameworks that govern fetal surgery in the United Kingdom,European Union,and the United States

The specialty of fetal surgery or fetal intervention is one of the most exciting emerging fields of modern medicine. It is made possible by decades of major developments in antenatal imaging, obstetric anaesthesia, fetal medicine, paediatric surgery, and of course by the bold and novel practitioners willing to take new steps to advance the field. Beginning in the 1970s, it has now reached a stage of maturity where there are several established in utero procedures and countless clinical trials and studies to develop more. But what is the legal situation that fetal surgeons find themselves in? What are the rights and legal protections for the fetus and the mother, both of which are arguably the patient? This article will address this question, discussing and summarising the current legal frameworks governing fetal surgery in the jurisdictions of the United Kingdom, European Court of Human Rights, and the United States of America as well as discuss what the future may hold and how researchers and physicians in the specialty can best navigate the legal environment.     

Demography of northern flying squirrels informs ecosystem management of western interior forests.

We studied northern flying squirrel (Glaucomys sabrinus) demography in the eastern Washington Cascade Range to test hypotheses about regional and local abundance patterns and to inform managers of the possible effects of fire and fuels management on flying squirrels. We quantified habitat characteristics and squirrel density, population trends, and demography in three typical forest cover types over a four-year period. We had 2034 captures of flying squirrels over 41 000 trap nights from 1997 through 2000 and marked 879 squirrels for mark-recapture population analysis. Ponderosa pine (Pinus ponderosa) forest appeared to be poorer habitat for flying squirrels than young or mature mixed-conifer forest. About 35% fewer individuals were captured in open pine forest than in dry mixed-conifer Douglas-fir (Pseudotsuga menziesii) and grand fir (Abies grandis) forests. Home ranges were 85% larger in pine forest (4.6 ha) than in mixed-conifer forests (2.5 ha). Similarly, population density (Huggins estimator) in ponderosa pine forest was half (1.1 squirrels/ha) that of mixed-conifer forest (2.2 squirrels/ha). Tree canopy cover was the single best correlate of squirrel density (r = 0.77), with an apparent threshold of 55% canopy cover separating stands with low- from high-density populations. Pradel estimates of annual recruitment were lower in open pine (0.28) than in young (0.35) and mature (0.37) forest. High recruitment was most strongly associated with high understory plant species richness and truffle biomass. Annual survival rates ranged from 45% to 59% and did not vary among cover types. Survival was most strongly associated with understory species richness and forage lichen biomass. Maximum snow depth had a strong negative effect on survival. Rate of per capita increase showed a density-dependent response. Thinning and prescribed burning in ponderosa pine and dry mixed conifer forests to restore stable fire regimes and forest structure might reduce flying squirrel densities at stand levels by reducing forest canopy, woody debris, and the diversity or biomass of understory plants, truffles, and lichens. Those impacts might be ameliorated by patchy harvesting and the retention of large trees, woody debris, and mistletoe brooms. Negative stand-level impacts would be traded for increased resistance and resilience of dry-forest landscapes to now-common, large-scale stand replacement fires.     

Lab-scale investigation of the ability of Polar Organic Chemical Integrative Sampler to catch short pesticide contamination peaks

Environmental Science and Pollution Research - In this lab-scale study, the POCIS capacity to integrate short contamination peaks of variable intensity and duration was evaluated. POCIS were...     

Life cycle assessment of spray dried soluble coffee and comparison with alternatives (drip filter and capsule espresso)

This paper aims to evaluate the environmental burdens associated with spray dried soluble coffee over its entire life cycle and compare it with drip filter coffee and capsule espresso coffee. It particularly aims to identify critical environmental issues and responsibilities along the whole life cycle chain of spray dried coffee. This life cycle assessment (LCA) specifically uses foreground data obtained directly from coffee manufacturers and suppliers. Aside from energy consumption and greenhouse gases emissions, water footprint is also studied in detail, including regionalization of water impacts based on the ecological scarcity method 2006. Other impact categories are screened using the IMPACT 2002+ impact assessment method.The overall LCA results for a 1 dl cup of spray dried soluble coffee amounts approximately to 1 MJ of primary non-renewable energy consumption, to emissions of 0.07 kg of CO_2-eq, and between 3 and 10 l of non-turbined water use, depending on whether or not the coffee cultivation is irrigated and wet treated. When considering turbined water, use can be up to 400 l of water per cup. Pouch – and to a lesser extent metal can packaging alternatives – show lower environmental burdens than glass or sticks.On average, about one half of the environmental footprint occurs at a life cycle stage under the control of the coffee producer or its suppliers (i.e., during cultivation, treatment, processing, packaging up to distribution, along with advertising) and the other half at a stage controlled by the user (shopping, appliances manufacturing, use and waste disposal). Key environmental parameters of spray dried soluble coffee are the amount of extra water boiled and the efficiency of cup cleaning during use phase, whether the coffee is irrigated or not, as well as the type and amount of fertilizer used in the coffee field. The packaging contributes to 10% of the overall life cycle impacts.Compared to other coffee alternatives, spray dried soluble coffee uses less energy and has a lower environmental footprint than capsule espresso coffee or drip filter coffee, the latter having the highest environmental impacts on a per cup basis. This study shows that a broad LCA approach is needed to help industry to minimize the environmental burdens directly related to their products. Including all processes of the entire system is necessary i) to get a comprehensive environmental footprint of the product system with respect to sustainable production and consumption, ii) to share stakeholders responsibility along the entire product life cycle, and iii) to avoid problem shifting between different life cycle stages.     

Effect of inoculum to substrate ratio (I/S) on municipal solid waste anaerobic degradation kinetics and potential

The goal of this study is to evaluate the impact of the inoculum to substrate ratio (I/S) on the anaerobic degradation potential of municipal solid waste (MSW). Reconstituted MSW samples were thus incubated under batch anaerobic conditions and inoculated with an increasing amount of inoculum originating from a mesophilic sludge digester. I/S tested values were 0 (no inoculum added), 0.015, 0.03, 0.06, 0.12, 0.25, 1, 2 and 4 (gVM_inoculum/gVM_waste). The results indicate that the apparent maximal rate of dissolved organic carbon accumulation is reached at I/S = 0.12. Under this level, the hydrolysis process is limited by the concentration of biomass and can thus be described as first order kinetics phenomena with respect to biomass for I/S ratios below 0.12. The maximum methane production rate and the minimal latency are reached at a ratio of 2. In addition to that, both methane signature and ARISA show a shift in the methanogenic populations from hydrogenotrophic to acetoclastic.