Designing a purification process for chromium-, copper- and arsenic-contaminated wood

The disposal of chromated copper arsenate (CCA)-treated wood is becoming a serious problem in many countries due to increasing levels of contamination by the hazardous elements, chromium, copper and arsenic. The present experiment was conducted as a preliminary step toward one-step solvent extraction of CCA-treated wood. Because chromium, copper and arsenic have different chemical characteristics, it is best to consider them separately prior to designing a one-step extraction process. As a basis, various two-step extraction processes were first designed and tested experimentally to determine feasibility. Among these combinations, the treatment combining oxalic acid as the 1st step and a sodium oxalate solution under acidic conditions (pH 3.2) as the 2nd step was found to be an effective way of extracting CCA elements from treated wood. Extraction efficiency reached 100% for arsenic and chromium and 95.8% for copper after a 3-h sodium oxalate treatment, following a 1-h pre-extraction process with oxalic acid. On the other hand, the same combination under alkaline conditions (pH 11.2) during the 2nd step was ineffective for copper removal, indicating that pH plays an important role in complexation with sodium oxalate solution. The present results suggest that the extraction of CCA elements using a combination of oxalic acid and acidic sodium oxalate solution is a promising basis for application to a one-step extraction method.     

A novel extractant for removal of hazardous metals from preservative-treated wood waste

The purpose of this study was to develop a one-step metal extraction process that would effectively remove hazardous elements from wood powder or chips of western hemlock [Tsuga heterophylla (Raf.) Sarg.] treated with chromated copper arsenate (CCA) preservative. In addition, we tested this method for wood treated with other copper-based preservatives such as ammoniacal copper quaternary (ACQ) and copper, boron, and azole (CuAz). A bioxalate solution consisting of 0.125 M oxalic acid adjusted to pH 3.2 with sodium hydroxide was tested for its ability to extract chromium, copper, and arsenic from wood treated with CCA and copper from ACQ, CuAz, or a mixture of CCA-, ACQ-, and CuAz-treated wood in single step. The extraction proceeded efficiently with 6 h of treatment, and was insensitive to the differences in chemical characteristics, including solubility of individual elements. After 6 h of treatment, approximately 90% of chromium, copper, and arsenic were effectively removed from wood treated with CCA or a mixture of CCA, ACQ, and CuAz and 90% of copper from ACQ- and CuAz-treated wood. These results demonstrate that the solvent extraction technique using pH-adjusted bioxalate solution with sodium hydroxide is a promising method for pollution minimization by various types of wastes contaminated with heavy metals and arsenic.     

Characteristics of a bioxalate chelating extraction process for removal of chromium,copper and arsenic from treated wood

The disposal of wood waste treated with chromated copper arsenate (CCA) is a problem in many countries. We have proposed a novel chelating extraction technique for CCA-treated wood using bioxalate, a solution of oxalic acid containing sufficient sodium hydroxide to adjust the pH to 3.2, which is an effective way to obtain an extraction efficiency of 90% for chromium, copper, and arsenic. The purpose of the present study was to investigate the characteristics of bioxalate extraction of CCA-treated wood. Extractions of CCA-treated western hemlock chips with solutions of bioxalate, oxalic acid, and sodium hydroxide were carried out. The use of bioxalate was confirmed as the most effective extraction technique for chromium, copper and arsenic, with an efficiency of 90%. Extraction with simple oxalic acid was ineffective for copper (less than 40% extraction efficiency), but effective for chromium and arsenic, with 90% efficiency. Sodium hydroxide showed a similar tendency, being ineffective for chromium and copper (less than 20% extraction efficiency), but relatively effective for arsenic (around 70–80% efficiency). We also discovered an interesting phenomenon whereby the addition of sodium hydroxide to a simple oxalic acid solution during the oxalic acid extraction progress resulted in dramatically increased extraction efficiency for copper, chromium and arsenic, up to 90%. Although oxalic acid was ineffective for copper extraction, the addition of sodium hydroxide during the oxalic acid extraction process rendered it effective.     

Learning-by-catching: uncertain invasive-species populations and the value of information

This paper develops a model of invasive species control when the species’ population size is unknown. In the face of an uncertain population size, a resource manager's species-control efforts provide two potential benefits: (1) a direct benefit of possibly reducing the population of invasive species, and (2) an indirect benefit of information acquisition (due to learning about the population size, which reduces uncertainty). We provide a methodology that takes into account both of these benefits, and show how optimal management decisions are altered in the presence of the indirect benefit of learning. We then apply this methodology to the case of controlling the Brown Treesnake (Boiga irregularis) on the island of Saipan. We find that the indirect benefit—the value of information to reduce uncertainty—is likely to be quite large.     

Nitrifiers activity and community characteristics under stress conditions in partial nitrification systems treating ammonium-rich wastewater

Long-term exposure of nitrifiers to high concentrations of free ammonia(FA) and free nitrous acid(FNA) may affect nitrifiers activity and nitrous oxide(N_2O) emission.Two sequencing batch reactors(SBRs) were operated at influent ammonium nitrogen(NH_4-N) concentrations of 800 mg/L(SBRH) and 335 mg/L(SBRL),respectively.The NH_4-N removal rates in SBRHand SBRLwere around 2.4 and 1.0 g/L/day with the nitritation efficiencies of 99.3% and 95.7%,respectively.In the simulated SBR cycle,the N_2O emission factors were 1.61% in SBRH and 2.30% in SBRL.N_2O emission was affected slightly by FA with the emission factor of0.22%–0.65%,while N_2O emission increased with increasing FNA concentrations with the emission factor of 0.22%–0.96%.The dominant ammonia oxidizing bacteria(AOB) were Nitrosomonas spp.in both reactors,and their relative proportions were 38.89% in SBRHand13.36% in SBRL.Within the AOB genus,a species(i.e.,operational taxonomic unit [OTU] 76) that was phylogenetically identical to Nitrosomonas europaea accounted for 99.07% and 82.04% in SBRHand SBRL,respectively.Additionally,OTU 215,which was related to Nitrosomonas stercoris,accounted for 16.77% of the AOB in SBRL.     

Nematode community composition in hydrothermal vent and adjacent non-vent fields around Myojin Knoll,a seamount on the Izu-Ogasawara Arc in the western North Pacific Ocean

In contrast to specific large benthic invertebrates in chemosynthetic ecosystems such as hydrothermal vents, meiofaunal communities in such habitats have been reported to have strong taxonomic overlap with meiofauna in the adjacent “normal” environments. However, meiofauna have only recently been included in studies of those environments and detailed information on these communities is still rare. This is especially true in the Northwest Pacific Ocean, even though there are many seamounts with active vents in the calderas of the region. Nematode community composition at the genus level in sediments from a hydrothermal vent field in the caldera of Myojin Knoll (32°06′N, 139°52′E, depth 1,300 m), a seamount on the Izu-Ogasawara Arc, Japan, was investigated for the first time and was compared with adjacent non-vent areas inside and outside the caldera. Multivariate analyses showed that the composition of nematodes in the hydrothermal field was significantly different from that in the non-hydrothermal fields around the caldera. However, the common genera, such as Oxystomina, Pareudesmoscolex, Desmoscolex, and Microlaimus were found in two, or all three vent fields while their rank contributions differed among the three fields. When the data from Myojin Knoll were compared with those from other deep-sea vent environments in different regions (e.g., North Fiji Basin, East Pacific Rise, Mid-Atlantic Ridge), the nematode composition in the vent field of the Myojin caldera was more similar to that of the non-vent fields around the caldera than the composition in vent fields of other regions. These data from the Northwest Pacific Ocean also suggest the absence of long-range transport systems and local adaptations for meiofauna in hydrothermal vent fields.     

Effect of the bacterial pyoverdine siderophore on the phytoextraction of cesium from illite

Environmental Chemistry Letters - Radioactive Cs contamination is a major concern in case of a nuclear accident such as the Fukushima accident in 2011. Remediation methods have been proposed...     

Management of hazardous medical waste in Croatia

This article provides a review of hazardous medical waste production and its management in Croatia. Even though Croatian regulations define all steps in the waste management chain, implementation of those steps is one of the country's greatest issues. Improper practice is evident from the point of waste production to final disposal. The biggest producers of hazardous medical waste are hospitals that do not implement existing legislation, due to the lack of education and funds. Information on quantities, type and flow of medical waste are inadequate, as is sanitary control. We propose an integrated approach to medical waste management based on a hierarchical structure from the point of generation to its disposal. Priority is given to the reduction of the amounts and potential for harm. Where this is not possible, management includes reduction by sorting and separating, pretreatment on site, safe transportation, final treatment and sanitary disposal. Preferred methods should be the least harmful for human health and the environment. Integrated medical waste management could greatly reduce quantities and consequently financial strains. Landfilling is the predominant route of disposal in Croatia, although the authors believe that incineration is the most appropriate method. In a country such as Croatia, a number of small incinerators would be the most economical solution.