Bioproduction of ferric sulfate used during heavy metals removal from sewage sludge

Toxic metals removal from wastewater sewage sludge can be achieved through microbial processes involving Acidithiobacillus ferrooxidans. The oxidation of ferrous ions by A. ferrooxidans, cultured in sewage sludge filtrate, was studied in both batch and continuous flow stirred tank reactors. Sewage sludge filtrate containing natural nutrients (phosphorus and nitrogen) was recovered as effluent following the dehydration of a primary and secondary sludge mixture. Batch and continuous flow stirred tank reactor tests demonstrated that A. ferrooxidans were able to grow and completely oxidize ferrous iron in a culture medium containing more than 80% (v v(-1)) sewage sludge filtrate with 10 g Fe(II) L(-1) added. Toxic levels were reached when total organic carbon in the sewage sludge filtrate exceeded 250 mg L(-1). The ferric iron solution produced in the sludge filtrate by A. ferrooxidans was used to solubilize heavy metals in primary and secondary sludge. The solubilization of Cu, Cr, and Zn yielded 71, 49, and 80%, respectively. This is comparable with the yield percentages obtained using a FeCl(3) solution. The cost of treating wastewater sewage sludge by bioproducing a ferric ion solution from sewage sludge is three times less expensive than the conventional method requiring a commercial ferric chloride solution.     

The potential for improvements in energy efficiency and CO2 emissions in the EU27 cement industry and the relationship with the capital budgeting decision criteria

This paper performs a cost-effectiveness analysis of some of the best available technologies (BAT) that can contribute to decreasing the energy consumption and CO₂ emissions in the European Union’s (EU27) cement industry. Several capital budgeting decision criteria have been used (the payback period, the net present value and the internal rate of return) to study whether or not an investment should be considered worthwhile. The results show that, independent of the capital budgeting decision criteria used, the number of cost-effective retrofitting possibilities available is large compared to the rate of improvements that the industry undertakes annually. This shows the insensitivity of the industry to financial criteria when it comes to making their investment decisions. The possible thermal energy improvement in the clinker production, if all these BATs were implemented, has been quantified to be around 10%. This achievement would place the cement industry in the upper bound of the benchmark range for clinker manufacture. However considering the delays observed nowadays in terms of diffusion of BATs in the cement industry, it requires a conducive policy environment that combines support for both technology development and to their deployment.     

Depth-related shift in life history strategies of a brooding and broadcasting deep-sea asteroid

Combining field and laboratory work, this study investigated the reproductive cycle, aggregative behavior, spawning periodicity, development and early growth of the sea star Henricia lisa living at bathyal depths off eastern Canada. Marked differences were found between individuals from ~1,300 and ~600 m deep. The former had a male biased sex ratio and an aperiodic reproductive cycle, whereas the latter displayed an equal sex ratio and a biannual breeding pattern. Furthermore, the maximum size was larger and female fecundity roughly five times higher in shallower compared to deeper populations. In the tanks, aggregative behavior was recorded twice a year during the summer and winter breeding periods. The onset of aggregations and spawning coincided with a temperature of 3–4°C. Males spawned first and females typically responded inside 30–60 min. Between 12 and 20 eggs were retained to be brooded under the arched arms of the female, whereas the remainder were broadcasted and developed without parental care. The fertilized eggs underwent a first cleavage after 12 h, reached the brachiolaria stage in 1 month, became juveniles within 3–4 months and reached ~ 4 mm in diameter after 14–17 months of growth. The embryos and juveniles developed at the same rate whether brooded or not, and development of winter cohorts was typically slower due to lower prevailing temperatures. This study of H. lisa provides the first evidence of lecithotrophy in a seasonally breeding deep-sea echinoderm and of brooding in a deep-sea asteroid.     

Heat as emergency,heat as chronic stress: policy and institutional responses to vulnerability to extreme heat

Increasingly commonplace in cities, extreme heat events introduce multi-stress vulnerability, affecting people’s health and well-being, financial situation, mobility, social relations, and access to basic services. Planning to reduce heat vulnerability has become part of government business and to some extent community-level responses, cutting across a number of sectors including public health, emergency management, social services, critical infrastructure, and housing. This planning is often framed around heat as an emergency, focusing on preventing loss of life and severe health impacts, yet a vulnerability perspective also draws attention to the chronic and persistent impacts of heat. Our research, based on interviews and desktop research in Melbourne, Australia, found tensions between addressing heat as an emergency and heat as a source of chronic stress, with emergency responses taking precedence over responses addressing the chronic dimensions of heat. Each approach results in different but nonetheless related programmatic priorities for reducing vulnerability. In complex institutional settings, improving relations between policy and programme managers, non-government organisations, and vulnerable people themselves would enable the multiple stresses associated with extreme heat to be more effectively addressed. Policy and institutional responses that better appreciate the interconnections between the emergency and chronic aspects of heat would likely reduce vulnerability and contribute to more just approaches to urban sustainability.     

Meta-analysis of environmental contamination by alkylphenols

Alkylphenols and alkylphenol ethoxylates (APE) are toxics classified as endocrine-disrupting compounds; they are used in detergents, paints, herbicides, pesticides, emulsifiers, wetting and dispersing agents, antistatic agents, demulsifiers, and solubilizers. Many studies have reported the occurrence of alkylphenols in different environmental matrices, though none of these studies have yet to establish a comprehensive overview of such compounds in the water cycle within an urban environment. This review summarizes APE concentrations for all environmental media throughout the water cycle, from the atmosphere to receiving waters. Once the occurrence of compounds has been assessed for each environmental compartment (urban wastewater, wastewater treatment plants [WWTP], atmosphere, and the natural environment), data are examined in order to understand the fate of APE in the environment and establish their geographical and historical trends. From this database, it is clear that the environment in Europe is much more contaminated by APE compared to North America and developing countries, although these APE levels have been decreasing in the last decade. APE concentrations in the WWTP effluent of developed countries have decreased by a factor of 100 over the past 30?years. This study is aimed at identifying both the correlations existing between environmental compartments and the processes that influence the fate and transport of these contaminants in the environment. In industrial countries, the concentrations observed in waterways now represent the background level of contamination, which provides evidence of a past diffuse pollution in these countries, whereas sediment analyses conducted in developing countries show an increase in APE content over the last several years. Finally, similar trends have been observed in samples drawn from Europe and North America.     

PAH removal from spiked municipal wastewater sewage sludge using biological, chemical and electrochemical treatments

Polycyclic aromatic hydrocarbons (PAHs) have been widely studied due to their presence in all the environmental media and toxicity to life. These molecules are strongly adsorbed on the particulate matters of soils, sludges or sediments because of their strong hydrophobicity which makes them less bioavailability, thus limiting their bioremediation. Different sludge treatment processes were tested to evaluate their performances for PAH removal from sludge prealably doped with 11 PAHs (5.5mg each PAH kg(-1) of dry matter (DM)): two biological processes (mesophilic aerobic digestion (MAD) and simultaneous sewage sludge digestion and metal leaching (METIX-BS)) were tested to evaluate PAH biodegradation in sewage sludge. In parallel, two chemical processes (quite similar Fenton processes: chemical metal leaching (METIX-AC) and chemical stabilization (STABIOX)) and one electrochemical process (electrochemical stabilization (ELECSTAB)) were tested to measure PAH removal by these oxidative processes. Moreover, PAH solubilisation from sludge by addition of a nonionic surfactant Tween 80 (Tw80) was also tested. The best yields of PAH removal were obtained by MAD and METIX-BS with more than 95% 3-ring PAH removal after a 21-day treatment period. Tw80 addition during MAD treatment increased 4-ring PAHs removal rate. In addition, more than 45% of 3-ring PAHs were removed from sludge by METIX-AC and during ELECSTAB process were quiet good with approximately 62% of 3-ring PAHs removal. However, little weaker removal of 3-ring PAHs (<35%) by STABIOX. None of the tested processes were efficient for the elimination of high molecular weight (> or = 5-ring) PAHs from sludge.