Environmental principles applicable to supply chains design and operation

In this paper we deal with the problem of identifying environmental principles for the design and operation of supply chains. The operations that are included in supply chains are briefly described along with the approaches that are applied in order to improve their environmental performance. A background of environmental principles for achieving eco-efficiency and building of environmentally friendly organizational systems is presented and emphasis is put on the application of such principles “from cradle to grave”. Then, environmental principles applicable to particular objects of logistics networks planning are identified and commented upon. In addition, selective case studies from the literature, which show the applicability of the formulated principles and their relevance to practice, are discussed. The paper concludes with some remarks regarding the benefits for companies and societies, in general, that occur as a result of the application of the formulated principles.     

Future heat-related climate change impacts on tourism industry in Cyprus

Tourism is a vital sector of Cyprus economy, attracting millions of tourists every year and providing economic growth and employment for the country. The aim of this study was to investigate the impacts of projected climate change in the tourism industry in Cyprus (Republic of Cyprus) using both “Tourism Climate Index” (TCI) and “Beach Climate Index” (BCI). TCI refers to tourism activities mainly related to sightseeing, nature-based tourism, and religious tourism etc., while BCI represents beach tourism that constitutes 85 % of tourism activities in Cyprus. The projections of climate change impacts in tourism are performed for 2071–2100 period, using regional climate model output employing the A1B greenhouse gas emissions scenario. The 1961–1990 period is used as the control run to compare the respective results of the future projections. The significant warming anticipated in the distant future (increases in annual and summer temperatures close to 4 °C) will have adverse impacts on Cyprus tourism industry regarding sightseeing tourism. TCI results for the distant future period show only acceptable conditions for general tourism activities during summer in contrast with the good/very good conditions in the present climate. Conversely, this type of tourism seems to be benefited in shoulder seasons, i.e., during spring and autumn; TCI and hence tourist activities improve in the distant future in relation to the present climate. On the other hand, concerning beach tourism, future projections indicate that it will not be negatively affected by future climate change and any changes will be positive.     

Climate change impacts,vulnerability and adaptive capacity of the electrical energy sector in Cyprus

The purpose of this study was to investigate the climate change impacts, vulnerability and adaptive capacity of the electrical energy sector in Cyprus. Spatial vulnerability of the island was assessed using the degree-day indicator to investigate heating and cooling demands in the near future using daily temperature projections from regional climate models (RCMs). Using daily electrical energy consumption data for the present climate, an impact model linking consumption and temperature was constructed and this relationship was projected to the future climate using the data from the RCMs and assuming the same technology use. Our impact model results showed that for the period between November and April (‘cold period’), a decreasing trend in electrical energy consumption is evident due to warmer conditions in the near future, while for the period between May and October (‘warm period’), an increasing trend in electricity consumption is evident as warmer conditions dominate by 2050. Regarding the spatial vulnerability assessment, the cooling degree-day indicator testified that major increases in cooling demand, between 100 and 200 degree-days, are expected in inland and southern regions during the summer in the near future. In addition, increases of about 20–50 degree-days are anticipated during autumn. Conversely, energy demand for heating is projected to decrease during spring and winter, especially in the higher elevation parts of the island. More precisely, reductions of about 30–75 degree-days are projected during spring, while greater reductions of about 60–90 degree-days are expected during winter in heating demand, especially for in the near future. The ability of the energy sector to adapt and follow these changes was deemed to be satisfactory reducing the overall vulnerability of the sector to future climate change.     

Effect of pretreatment techniques on food waste solubilization and biogas production during thermophilic batch anaerobic digestion

The purpose of this study was to optimize the alkaline, ultrasonication, and thermal pretreatment in order to enhance the solubilization of food waste (FW) for the production of volatile fatty acids, hydrogen, and methane in thermophilic batch anaerobic digestion. Initially, the effect of pretreatment techniques in the acidogenic phase was studied, and the optimal combinations of different conditions were determined. It was found that each pretreatment technique affected food waste solubilization differently. Alkaline pretreatment increased hydrogen yield in the acidogenic sludge by four times over control. COD solubilization was increased by 47 % when FW pre-heated at 130 °C for 60 min. Ultrasonication at 20 kHz and 45 min reduced processing time to 38 h from the 60–80 h needed in normal operation. Response surface methodology (RSM) was used to optimize a combination of alkaline, ultrasonication, and thermal pretreatment. Optimized conditions were applied to methanogenic single-stage thermophilic AD process, and their impact on biogas production was monitored. Results showed that FW heated at 130 °C for 50 min geminates biogas production compared to control experiment. In conclusion, a short thermal pretreatment regime could significant affect biogas production in single-stage thermophilic AD.     

Application of system dynamics modeling for evaluation of different recycling scenarios in Singapore

The influence of socioeconomic factors, such as population and rapid economic growth, and the change of consumption and living patterns make waste management in Singapore, a complex issue. Due to limited land and resources, the solid waste management scheme requires a comprehensive approach. Therefore, system dynamics (SD) modeling was applied to assess alternative strategies for solid waste management by interconnecting landfill capacity and recycling efficiency with reference to the projection on waste generation. Nine different scenarios were investigated to identify the best approach to maintain environmental sustainability without inhibiting the economic growth. Four subsystems (i.e., population, economy, waste recycling, and waste disposal) have been incorporated into the SD model to broaden the effectiveness of the waste management system. Research findings revealed that a high economic pattern and a high recycling rate are recommended to satisfy the requirements for economic growth and environmental sustainability while extending landfill capacity for waste disposal. Even though the balance of expenditure could be increased by the high recycling rate, it meets the need for long-term incineration and landfill planning.     

Chelating agent-assisted electrokinetic removal of cadmium, lead and copper from contaminated soils

An integrated experimental program was conducted to remove Cd, Pb and Cu from contaminated soil. The chelate agents nitrilotriacetic acid (NTA), diethylenetriamine pentaacetic acid (DTPA) and ethyleneglycol tetraacetic acid (EGTA) were used as washing solutions under different pH conditions and concentrations. Results showed that the extraction efficiency for Cd in decreasing order was NTA > EGTA > DTPA, while for Pb and Cu it was DTPA > NTA > EGTA. The use of higher chelate concentrations did not necessarily result in greater extraction efficiency. Electrokinetic remediation was applied by conditioning anolyte-catholyte pH to neutral values in order to avoid any potential alterations to the physicochemical soil properties. The removal efficiency for Cd was 65-95%, for Cu 15-60%, but for Pb was less than 20%. The phytotoxicity of the treated soil showed that the soil samples from the anode section were less phytotoxic than the untreated soil, but the phytotoxicity was increased in the samples from the cathode section.     

LC–ICP–MS analysis of arsenic compounds in dominant seaweeds from the Thermaikos Gulf (Northern Aegean Sea,Greece)

The content of total arsenic and arsenic compounds in the dominant seaweed species in the Thermaikos Gulf, Northern Aegean Sea was determined in samples collected in different seasons. Total arsenic was determined by acid digestion followed by ICP–MS. Arsenic speciation was analyzed by water extraction followed by LC–ICP–MS. Total arsenic concentrations in the seaweeds ranged from 1.39 to 55.0 mg kg⁻¹. Cystoseira species and Codium fragile showed the highest total As contents, while Ulva species (U. intestinalis, U. rigida,U. fasciata) had the lowest Arsenosugars, the most common arsenic species in seaweeds, were found in all samples, and glycerol-arsenosugar was the most common form; however, phosphate-arsenosugar and sulfate-arsenosugar were also present. Inorganic arsenic was measured in seven algae species and detected in another. Arsenate was the most abundant species in Cystoseira barbata (27.0 mg kg⁻¹). Arsenobetaine was measured in only one sample. Methylated arsenic species were measured at very low concentrations. The information should contribute to further understanding the presence of arsenic compounds in dominant seaweeds from the Thermaikos Gulf.     

Adaptation of urine source separation in tropical cities: Process optimization and odor mitigation

Source-separating urine from other domestic wastewaters promotes a more sustainable municipal wastewater treatment system. This study investigated the feasibility and potential issues of applying a urine source-separation system in tropical urban settings. The results showed that source-separated urine underwent rapid urea-hydrolysis (ureolysis) at temperatures between 34–40^oC, stale/fresh urine ratios greater than 40%, and/or with slight fecal cross-contamination. Undiluted (or low-diluted) urine favored ureolysis; this can be monitored by measuring conductivity as a reliable and efficient indicator. The optimized parameters demonstrated that an effective urine source-separation system is achievable in tropical urban areas. On the other hand, the initial release of CO₂ and NH₃ led to an elevated pressure in the headspace of the collection reservoir, which then dropped to a negative value, primarily due to oxygen depletion by the microbial activity in the gradually alkalized urine. Another potential odor source during the ureolysis process was derived from the high production of volatile fatty acids (VFA), which were mainly acetic, propanoic, and butyric acids. Health concerns related to odor issues might limit the application of source separation systems in urban areas; it is therefore vital to systematically monitor and control the odor emissions from a source separation system. As such, an enhanced ureolysis process can attenuate the odor emissions.

Implications: Urine source separation is promising to improve the management of domestic wastewater in a more sustainable way. The work demonstrates the achievability of an effective urine source-separation system in tropical urban areas. The installation of urine-stabilization tanks beneath high-rise buildings lowers the risk of pipe clogging. Conductivity measurement can be utilized as a reliable process indicator for an automated system. However, urine hydrolysis raises a strong potential of odor emission (both inorganic and organic), which might limit the application of source separation systems in urban areas. An enhanced ureolysis process could shorten and attenuate the odor emissions.     

A model for supply chains environmental performance analysis and decision making

The need to include environmental criteria in the analysis of supply chains is increasingly recognized as a result both of limitations that are posed by legislation and regulations as well as of various motivations that a company may have. A decision model is proposed in this paper based on environmental performance indicators, which may support decision making in the case of supply chains in the presence of environmental considerations. The model uses a set of principles applicable to supply chains design and operation available from previous research work.