Water Remediation: PVA-Based Magnetic Gels as Efficient Devices to Heavy Metal Removal

Scientific and technological researches are devoted to obtain materials capable of retaining different kinds of pollutants, contributing to contamination solutions. In this context, hydrogels have emerged as great candidates because of their excellent absorption properties as well as good mechanical, thermal and chemical properties. More specifically, ferrogels (magnetic gels) present the extra advantage of being easily manipulated by a permanent magnet. Here, we present the results derived from the application of ferrogels as efficient tools to extract heavy metal pollutants from wastewater samples. The gels were prepared following the method of freezing and thawing of a polyvinyl alcohol aqueous solution with magnetic nanoparticles coated with polyacrylic acid. Ferrogels were fully characterized and their ability to retain Cu²⁺ and Cd²⁺, as model heavy metals, was studied. Thus kinetics and mechanisms of adsorption were evaluated and modeled. The concentration of MNPs on the PVA matrix was key to improve the adsorption capability (approximately the double of retention is improved by the MNPs addition). The adsorption kinetics was determined as pseudo-second order model, whereas the Langmuir model was the most appropriate to explain the behavior of the gels. Finally reuse ability was evaluated to determine the real potential of these materials, the ferrogels demonstrated high efficiency up to about five cycles, retaining about 80–90% of their initial adsorption capability. All the results indicated that the materials are promising candidates able to compete with the commercial technology regarding to water remediation.     

An improvement selection methodology for key performance indicators

Key performance indicators (KPIs) are critical measures for determining the health of a manufacturing plant in relationship to the plant’s goals. In today’s competitive environment, manufacturers cannot be careless about their business; in fact, they must ensure that their KPIs are effective and use them to make improvements when necessary. This paper describes a method for suggesting improvements to a manufacturer’s KPIs, based on the results achieved from a workshop to score the KPI on a number of predefined criteria. The approach uses a prospect theory approach to weight the scoring. Different problem formulations were derived that allow for both recommendations for improvements and the recommendations for disinvestments to over-performing KPIs. The authors applied the developed approach to two workshop outputs, each from independent manufacturers, and the results highlighted the significant difference between the two manufacturers in terms of improvement priorities and KPI assessment. The optimal improvement suggestions were compared to those found through a fast heuristic. It was determined that given the underlying assumptions of the approach that the heuristic solutions were just as adequate as the optimal ones.     

Closing the phosphorus loop in England: The spatio-temporal balance of phosphorus capture from manure versus crop demand for fertiliser

Every year 90 million tonnes of housed livestock manures are produced in the UK. This is a valuable reservoir of global phosphorus (P) and a point in the cycle where it is vulnerable to being lost from the terrestrial system. Improved manure management for the effective reuse of phosphorus is vital to simultaneously tackle a major source of water pollution and reduce our dependence on imported fertilisers. This paper quantifies, for the first time, the spatial and temporal challenges of recycling the required amount of manure P from areas of livestock production to areas of crop production in eight regions of England. The analysis shows that England has a P deficit and therefore the capacity to fully utilise the manure P on arable land, but that uneven spatial distribution of livestock poses a significant challenge to closing the P loop in agriculture. Two of the eight regions were shown to have surplus manure P, with the remaining six regions having P deficits, indicating that an annual export of 4.7 thousand tonnes P (2.8 million tonnes manure) must take place from the west to the east of the country each year to balance P supply and demand. Moreover, housed manure production peaks between October and February, requiring an excess of 23.0 thousand tonnes P (15 million tonnes manure) to be stored until it can be used for crop fertilisation from March onwards. The results demonstrate the scale of the challenge in managing manure P in an agricultural system that has separated livestock production from crop production, a pattern that is echoed throughout the developed world. To overcome the spatial and temporal challenges, a logistical system is recommended that will balance the nutrient potential (nitrogen and P content and availability) and pollution potential (eutrophication, greenhouse gas emissions, particulates and nitrous oxide from transport) for cost-effective and environmentally compatible redistribution of manure P from areas of surplus to areas of deficit, when required.     

Forensic Evaluation of Metals (Cr,Cu, Pb,Zn), Isotopes (δ13C and δ15N), and C:N Ratios in Freshwater Sediment

A forensic approach was used to evaluate sediments from Portão Stream, including analysis of metals, carbon (C) and nitrogen (N) stable isotopes, and C:N ratios. Samples collected at various points located along the stream were tested in order to investigate a possible illegal leachate input. The studied stream is heavily impacted by sewage and industrial discharges from two cities along its course. Among the metals analyzed, chromium (Cr) was noticeably the main pollutant, showing the highest levels, above regulatory limits, downstream from some potential sources of effluents enriched with this metal. Isotope analyses revealed a general trend of depletion in the heavier isotope along the stream for C and N. The exception was one point near a hazardous waste landfill, where relatively more enriched δ¹³C and δ¹⁵N values were found. The isotope and metal analysis results indicated that this site was affected by a particular source, demonstrating the combination of these parameters could be used for the discrimination of sources in a heavily polluted stream. Nevertheless, further investigations are necessary to provide a comprehensive evaluation of the biogeochemical processes involved in the incorporation of leachate in sediments to use this analysis as evidence for the illegal leachate discharge.     

Natural background concentrations of nutrients in the German Bight area (North Sea)

Natural background concentrations of nutrients are needed for the assessments of eutrophication processes and their status. Natural background concentrations of total nitrogen (TN) and total phosphorus (TP) were modelled for the rivers discharging into the German Bight and the Rhine considering individual catchment sizes, freshwater flows and soil types. These data were validated by comparison with data from unpolluted rivers. The consistency of modelled and some compiled nutrient concentrations was confirmed by their area-specific load dependency on freshwater discharges. Pristine inorganic nutrient concentrations were deduced from modelled relations to TN and TP in unpolluted rivers. Pristine nutrient gradients between rivers and offshore waters were estimated by linear mixing until a salinity of 32, continued by hyperbolic fits towards recent mean offshore values (salinity 34.5?C35). Based on these gradients and recent mean salinities, maps of pristine surface gradients were plotted for the whole German Bight. Variability was transferred from recent conditions as percentage of standard deviation. Reported historical nutrient data and concentrations from unpolluted rivers, coastal and offshore North Sea waters are discussed concerning their relations to natural background conditions.     

Pollutant Removal from Wood and Coal Flue Gases by Soil Treatment

If many homeowners convert to solid fuels for heating, residential flue gases will be a large source of air pollution. Control of this pollution requires an inexpensive, reliable, and effective method of flue gas treatment. One such method is to force flue gases through soil beds. Such soil treatment removes all detectable smoke, odor, and polynuclear organic matter (POM), up to 97% of the CO, and at least 97% of the SO₂ from flue gases of wood and coal combustion. The technique is low cost, reliable, almost maintenance-free, and also appears suitable for other small point sources of air pollution.