Characteristics of metal contamination in paddy soils from three industrial cities in South Korea

Paddy soil contamination is directly linked to human dietary exposure to toxic chemicals via crop consumption. In Korea, rice paddy fields are often located around industrial complexes, a major anthropogenic source of metals. In this study, rice paddy soils were collected from 50 sites in three industrial cities to investigate the contamination characteristics and ecological risk of metals in the soils. The cities studied and their major industries are as follows: Ulsan (petrochemical, nonferrous, automobile, and shipbuilding), Pohang (iron and steel), and Gwangyang (iron and steel, nonmetallic, and petrochemical). Thirteen metals (Al, As, Ba, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V, and Zn) were analyzed using inductively coupled plasma–optical emission spectrometry (ICP–OES). The mean concentration of Cd (1.98 mg/kg) exceeded the soil quality guideline of Canada (1.4 mg/kg), whereas concentrations of other metals were under the standards of both Korea and Canada. Generally, levels of metal concentrations decreased with increasing distance from industrial complexes. Among the three cities, Pohang showed high concentrations of Zn (142.2 mg/kg), and Ulsan and Gwangyang showed high concentrations of Cr (33.9 mg/kg) and Ba (126.4 mg/kg), respectively. These contamination patterns were influenced by the different major industries of each city, which was clearly demonstrated by the principal component analysis results. Pollution indices suggested that As, Cd, Pb, and Zn were enriched in the paddy soils via anthropogenic activities. Comprehensive potential ecological risk indices were at considerable levels for most sites, especially because of major contributions from As and Cd, which can pose potential ecological threats.

     

Biodegradation of pentyl amine and aniline from petrochemical wastewater

The objectives of the project were to isolate a bacterial strain capable of degrading pentyl amine and aniline and to define the optimal pentyl amine and aniline degradation conditions for this bacterial strain. The bacterial strain was isolated from activated sludge obtained from a Northeastern China treatment facility for petrochemical wastewater rich in pentyl amine and aniline. Once the strain was isolated, five triplicate (5) batch tests were used to establish the conditions for maximum pentyl amine and aniline degradation, by varying one at a time the following five factors: temperature, pH, reaction time, pollutant concentrations and aeration rate. In a final test, oil refinery sludge was inoculated with the strain and tested for the degradation of pentyl amine and aniline under optimal conditions, while observing the degradation pathway of pentyl amine and aniline. The isolated strain, PN1001, is a member of the Pseudomonas species and it was capable of degrading pentyl amine and aniline. The optimal reactor conditions for the degradation of a mixture of pentyl amine and aniline, at a concentration ranging between 150 and 200mg/L, were found to be 30 degrees C at a pH of 7.0, under a reaction time of 24h and a maximum solution dissolved oxygen level of 6 mgO(2)/L. Under such conditions, the strain PN1001 degraded 93% and 89% of the pentyl amine and aniline, respectively, aniline being more toxic and demonstrating a more complex degradation pathway. The strain PN1001 degraded more contaminants when both were present because of the pi and sigma electron cloud coordination functions of aniline and pentyl amine, respectively, presumed to reduce the toxic effect of aniline. Once inoculated with the strain, oil refinery sludge degraded 93% and 88% of the pentyl amine and aniline, compared to the strain alone which degraded 72% and 82%, likely because of the sludge's buffering effect against the toxic environment.     

Alternative antimicrobial compounds to control potential Lactobacillus contamination in bioethanol fermentations

Antibiotics are commonly used to control microbial contaminants in yeast-based bioethanol fermentation. Given the increase in antibiotic-resistant bacteria, alternative natural antimicrobials were evaluated against the potential contaminant, Lactobacillus. The effects of nisin, ?-polylysine, chitosan (CS) and lysozyme were screened against 5 Lactobacillus strains. A standard broth- microdilution method was used in 96-well plates to assess the minimal inhibitory concentration (MIC). L. delbrueckii subsp lactis ATCC479 exhibited maximal MICs with CS, ?-polylysine and nisin (1.87, 0.3125 and 0.05 mg/mL, respectively). Nisin reduced most Lactobacillus strains by 6 log CFU/mL after 48 hours with the exception of L. casei. Synergism occurred when ethylenediaminetetraacetic acid (EDTA) was added with nisin. An MIC of 0.4 mg/mL of nisin combined with the EDTA at an MIC of 1 mg/ml markedly suppressed L .casei by 6 log CFU/mL. In conclusion, alternative antimicrobials proved to be a potential candidate for controlling bacterial contamination in the fermentation process. Synergistic effect of nisin with EDTA successfully inhibited the nisin-resistant contaminant, L. casei.     

Development of EMC-based empirical model for estimating spatial distribution of pollutant loads and its application in rural areas of Korea

An integrated approach to easily calculate pollutant loads from agricultural watersheds is suggested and verified in this research. The basic concepts of this empirical tool were based on the assumption that variations in event mean concentrations (EMCs) of pollutants from a given agricultural watershed during rainstorms were only attributable to the rainfall pattern. Fifty one sets of EMC values were obtained from nine different watersheds located in the rural areas of Korea, and these data were used to develop predictive tools for the EMCs in rainfall runoff. The results of statistical tests of these formulas show that they are fairly good in predicting actual EMC values of some parameters, and useful in terms of calculating pollutant loads for any rainfall event time span such as daily, weekly, monthly, and yearly. This model was further checked in for its field applicability in a reservoir receiving stormwater after a cleanup of the sediments, covering 17 consecutive rainfall events from 1 July to 15 August in 2007. Overall the predicted values matched the observed values, indicating the feasibility of this empirical tool as a simple and useful solution in evaluating timely distribution of nonpoint source pollution loads from small rural watersheds of Korea.     

Monitoring and risk assessment of polychlorinated biphenyls (PCBs) in agricultural soil from two industrialized areas

For monitoring and risk assessment, levels and distributions of Σ₂₉ PCBs in paddy soil samples collected from Gwangyang (10 sites) and Ulsan (20 sites), heavily industrialized cities in Korea, were investigated using high-resolution gas chromatography/high-resolution mass spectrometry. Overall, total concentrations of Σ₂₉ PCBs in Gwangyang (216.4–978.6 pg g^?1 dw) and Ulsan (273.8–1824.1 pg g^?1 dw) were higher than those (106.6–222.6 pg g^?1 dw) in agricultural soil from Anseong in Korea. The TEQ (toxic equivalency) values from Gwangyang (0.06–0.40 ng TEQ kg^?1 dw) and Ulsan (0.06–0.22 ng TEQ kg^?1 dw) were higher than those (0.04–0.11 ng TEQ kg^?1 dw) in Anseong but lower than the WHO threshold level (20 ng TEQ kg^?1). However, one of the most toxic congeners, PCB 126, gave the highest concentration, possibly posing a risk to the biota. Seven indicator PCB congeners contributed to 50–80% of the total concentration of Σ₂₉ PCBs, indicating the 7 PCBs can be used as valuable indicators for monitoring. The principal component analysis and cluster analysis for the homologue profiles of PCBs indicated that all the samples from both cities had the similar PCB contamination patterns, and the major sources of the PCB contamination were most likely from the usage of Aroclor 1254 than those of Aroclors 1242 and 1260. These PCB technical mixtures were possibly significantly used by various industries including iron and steel industries in Gwangyang and petrochemical and shipbuilding industries in Ulsan.     

Effect of surfactant alkyl chain length on soil cadmium desorption using surfactant/ligand systems

The effect of surfactant alkyl chain length on soil Cd desorption was studied using nonionic surfactants of polyethylene oxide (PEO) of PEO chain lengths of 7.5 (Triton X-114), 9.5 (Triton X-100), 30 (Triton X-305), or 40 units (Triton X-405) in combination with the I- ligand. Triplicate 1 g soil samples were equilibrated with 15 ml of surfactant-ligand mixture, at concentrations of 0.025, 0.50 or 0.10, and 0.0, 0.168 or 0.336 mol/l, respectively. After shaking the samples for 24 h, the supernatant fraction was analyzed for Cd content to determine the percent of Cd desorbed from the soil. After five successive washings, 53%, 40% and 25% of Cd had been desorbed by 0.025, 0.050 or 0.10 mol/l of Triton X-114, respectively, in the presence of 0.336 mol/l of I-, whereas with the same conditions, Triton X-100 desorbed 61%, 57% and 56% Cd and either Triton X-305 or Triton X-405 desorbed 51, 40 and 14 to 16% Cd. The most efficient Cd desorption was obtained using 0.025 mol/l Triton X-100 in admixture with 0.336 mol/l I-. Increased surfactant concentration was detrimental to Cd desorption consistent with a process that blocked ligand access to the soil particle surface. After 5 washings,the cumulative cadmium desorption decreased with increasing surfactant alkyl chain length, indicating that the metal-ligand complexes are preferably stabilized by the micelles' hydrophobic octyl phenyl (OP) group rather than by the hydrophilic PEO group. In the absence of ligand, the surfactants alone desorbed less than 1% Cd from the contaminated soil, suggesting that the ligand, rather than the surfactant, extracts the metal, to be subsequently stabilized within the surfactant micelles.     

Conversion of plant materials into hydroxymethylfurfural using ionic liquids

The use of fossil fuels now induces two major issues. First, fossil fuel burning is increasing atmospheric carbon dioxide (CO₂) concentrations and, in turn, global warming. Second, fossil fuel resources are limited and will thus decrease in the long run. As a potential solution, there is a need for ecological manufacturing processes that convert raw plant materials into chemical products. For instance, raw plants can be directly converted into hydroxymethylfurfural, which is a versatile intermediate for the synthesis of valuable biofuels such as dimethylfuran and 5-ethoxymethyl-2-furfural. This technology has two benefits for chemical sustainability. First, the pretreatment step is eliminated, thus contributing to reduction of CO₂ emissions. Second, plants are sustainable resources versus fossil fuels, which are limited. Here, we review current sustainable technologies for the production of biobased products and hydroxymethylfurfural from plants, using in particular ionic liquids. Plant sources include poplar, switchgrass, miscanthus, weed plants, and agave species.