Health risk assessment of PAHs in fruit juice samples marketed in city of Tehran,Iran

Environmental Science and Pollution Research - The objective of the present study was to investigate the level of 16 PAHs in fruit juice samples (orange, apple, peach, pineapple, and mango) with...     

Biodegradation of low-density polyethylene (LDPE) by isolated fungi in solid waste medium

In this study, biodegradation of low-density polyethylene (LDPE) by isolated landfill-source fungi was evaluated in a controlled solid waste medium. The fungi, including Aspergillus fumigatus, Aspergillus terreus and Fusarium solani, were isolated from samples taken from an aerobic aged municipal landfill in Tehran. These fungi could degrade LDPE via the formation of a biofilm in a submerged medium. In the sterilized solid waste medium, LPDE films were buried for 100 days in a 1-L flask containing 400 g sterile solid waste raw materials at 28 °C. Each fungus was added to a separate flask. The moisture content and pH of the media were maintained at the optimal levels for each fungus. Photo-oxidation (25 days under UV-irradiation) was used as a pretreatment of the LDPE samples. The progress of the process was monitored by measurement of total organic carbon (TOC), pH, temperature and moisture. The results obtained from monitoring the process using isolated fungi under sterile conditions indicate that these fungi are able to grow in solid waste medium. The results of FT-IR and SEM analyses show that A. terreus and A. fumigatus, despite the availability of other organic carbon of materials, could utilize LDPE as carbon source. While there has been much research in the field of LDPE biodegradation under solid conditions, this is the first report of degradation of LDPE by A. fumigatus.     

Using Design-Expert to Optimize the Properties of a Polyethersulfone Ultrafiltration Membrane Through the Incorporation of NH2-MIL-53(Fe) and PVP for Maximum Cr(VI) Removal and Flux

Journal of Polymers and the Environment - In this study, an NH2-MIL-53(Fe) functionalized membrane was fabricated for Cr(VI) removal from contaminated groundwater. Design-Expert was employed to...     

Determination of mercury and arsenic levels in fish caught in the Beheshtabad River,Chaharmahal and Bakhtiari Province,Iran

Mercury and arsenic pollution has been recognized as a potential environmental and public health problem for over 40 years. The major source of exposure to mercury for humans is the ingestion of fish. This study was conducted with the aim of determining the levels of mercury and arsenic in the muscles of four fish species caught in the Beheshtabad River and comparing the results with the maximum tolerance levels for mercury and arsenic. The samples of 90 fish were used for the determination of both the metals by graphite furnace atomic absorption spectrometry. The results showed that the concentrations ranged from 1.5 to 3.8 µg kg^?1 for mercury and from 35 to 70 µg kg^?1 for arsenic, with means of 2.7 ± 0.5 and 57 ± 12 µg kg^?1, respectively. Both mean levels were lower than the threshold limits acceptable by WHO standards.     

Survey of quantity and management condition of end-of-life tires in Iran: a case study in Tabriz

Journal of Material Cycles and Waste Management - Once a tire is removed from a vehicle without the possibility of being remounted for continued on-road use, it is defined as waste and called...     

Land surface temperature estimating in urbanized landscapes using artificial neural networks

Scenario-based land surface temperature (LST) modeling is a powerful tool for adopting proper urban land use planning policies. In this study, using greater Isfahan as a case study, the artificial neural network (ANN) algorithm was utilized to explore the non-linear relationships between urban LST and green cover spatial patterns derived from Landsat 8 OLI imagery. The model was calibrated using two sets of variables: Normalized Difference Built Index (NDBI) and Normalized Difference Vegetation Index (NDVI). Furthermore, Compact Development Scenario (CDS) and Green Development Scenario (GDS) were defined. The results showed that GDS is more successful in mitigating urban LST (mean LST?=?40.93) compared to CDS (mean LST?=?44.88). In addition, urban LST retrieved from the CDS was more accurate in terms of ANOVA significance (sig?=?0.043) than the GDS (sig?=?0.010). The findings of this study suggest that developing green spaces is a key strategy to combat against the risk of LST concerns in urban areas.     

Potentially toxic elements in urban soils: source apportionment and contamination assessment

Soils play a vital role in the quality of the urban environment and the health of its residents. City soils and street dusts accumulate various contaminants and particularly potentially toxic elements (PTEs) from a variety of human activities. This study investigates the current condition of elemental concentration in the urban soils of Hamedan, the largest and the fastest-growing city in western Iran. Thirty-four composite soil samples were collected from 0 to 10 cm topsoil of various land uses in Hamedan city and were analyzed for total concentration of 63 elements by ICP-MS. The possible sources of elemental loadings were verified using multivariate statistical methods (principal component analysis and cluster analysis) and geochemical indices. The spatial variability of the main PTEs was mapped using geographic information system (GIS) technique. The results revealed a concentration for As, Co, Cr, Mn, Mo, Ni, and V in the soil samples comparable to the background values as well as a range of associations among these elements in a single component suggesting geogenic sources related to geological and pedogenic processes, while the soils mostly presented a moderate to considerable enrichment/contamination of Cd, Zn, Pb, and Sb and moderate enrichment/contamination of Cu, Zn, and Mo. It was found that anthropogenic factors, vehicular traffic in particular, control the concentration of a spectrum of elements that are typical of human activities, i.e., Cd, Cu, Hg, Pb, Sb, and Zn. Lead and Sb were both the most enriched elements in soils with no correlation with land use highlighting general urban emissions over time and the impact of transport networks directly on soil quality. The highest concentrations of As were recorded in the southern part of the city reflecting the influence of metamorphic rocks. The effect of the geological substrate on the Co and Ni contents was confirmed by their maximum concentrations in the city’s marginal areas. However, high spatial variability of urban elements’ contents displayed the contribution of various human activities. In particular, the increased concentration of Cd, Sb, and Pb was found to be consistent with the areas where vehicular traffic is heaviest.     

Larvicidal,repellent, and histopathologic effects of Citrullus colocynthis against the malaria vector

Abstract

This research is conducted to determine the larvicidal, repellent and pathological effects of fruit extracts of C. colocynthis on malaria vector mosquito, Anopheles stephensi Liston, 1901. The fruit water and ethanol extract of C. colocynthis were concentrated for larvicidal and repellent activities on human volunteer against An. stephensi. The temephos larvicide was tested as the positive control. A concentration of 300?mg/L had full-scale mortality and the most toxic effect. The LC₅₀ and LC₉₀ values of C. colocynthis water and ethanol extracts were 180and 283?mg/L, respectively. The LC₅₀ and LC₉₀ values of temephos were 0.2706 and 1.6932?mg/L, respectively. The ED₅₀ and ED₉₀ values of the plant extract were 0.2 and 1.3?mg/cm², respectively. Thin sections from treated larvae exhibited gross histopathologic effects of C. colocynthis fruit extracts on gut epithelial cell layer by vacuolization of foregut cuboidal and midgut columnar cells. This study suggested that the fruit extracts of C. colocynthis had significant larvicidal and repellent activity to be used as an ideal approach to control the malaria vector mosquito.     

Health risk assessment of mercury and arsenic associated with consumption of fish from the Persian Gulf

Concentrations of mercury and arsenic in fish from the Persian Gulf were determined by graphite furnace atomic absorption spectrometry. Concentrations of the metals in muscle samples were 0.049–0.402 μg g^?1 for mercury and 0.168–0.479 μg g^?1 for arsenic, with means of 0.133 and 0.312 μg g^?1, respectively. The maximum daily consumption rate (grams per day) and meal consumption limit (meals per month) was calculated to estimate health risks associated with fish consumption. According to the results, the maximum allowable consumption rate varies between 8–56 and 15–96 g/day base on mercury and arsenic content, respectively. The results of this study indicate that the concentration of mercury and arsenic is well below the maximum permissible levels for mercury (0.5 μg g^?1) and arsenic (6 μg g^?1) according to international standards.     

Numerical simulation of benzene transport in shoreline groundwater affected by tides under different conditions

● An approach for assessing the transport of benzene on the beach was proposed. ● The behavior of benzene in the subsurface of the beach was impacted by tide. ● Tidal amplitude influenced the travel speed and the benzene biodegradation. ● Hydraulic conductivity had the impact on plume residence time and biodegradation. ● Plume dispersed and concentration decreased due to high longitudinal dispersivity. The release and transport of benzene in coastal aquifers were investigated in the present study. Numerical simulations were implemented using the SEAM3D, coupled with GMS, to study the behavior of benzene in the subsurface of tidally influenced beaches. The transport and fate of the benzene plume were simulated, considering advection, dispersion, sorption, biodegradation, and dissolution on the beach. Different tide amplitudes, aquifer characteristics, and pollutant release locations were studied. It was found that the tide amplitude, hydraulic conductivity, and longitudinal dispersivity were the primary factors affecting the fate and transport of benzene. The tidal amplitude influenced the transport speed and percentage of biodegradation of benzene plume in the beach. A high tidal range reduced the spreading area and enhanced the rate of benzene biodegradation. Hydraulic conductivity had an impact on plume residence time and the percentage of contaminant biodegradation. Lower hydraulic conductivity induced longer residence time in each beach portion and a higher percentage of biodegradation on the beach. The plume dispersed and the concentration decreased due to high longitudinal dispersivity. The results can be used to support future risk assessment and management for the shorelines impacted by spill and leaking accidents. Modeling the heterogeneous beach aquifer subjected to tides can also be further explored in the future study.